Status of Feathercoin p2pool software releases
Feathercoin has updated to GPU "only" Neoscrypt algorithm and p2pool updates have been released for a while.
**The Feathercoin neoscrypt p2pool instruction are included in Github repository :**
https://github.com/wellenreiter01/p2pool-neoscrypt
**Ask for further help with p2pool on the Feathercoin Forum**
http://forum.feathercoin.com/topic/8384/what-version-of-p2pool-software-to-use-with-feathercoin-neoscrypt/2
The p2pool now installs easy and runs great as your own private pool. The current estimates at current average FTC (neoscrypt) difficulty means you can "Solo mine" a something like a R9 280 using NSGminer. It is a good introduction to mining without using ASICs.
** NSGminer v0.9.2: The Fastest NeoScrypt GPU Miner**
https://github.com/ghostlander/nsgminer
https://bitcointalksearch.org/topic/nsgminer-v094-the-fastest-neoscrypt-gpu-miner-712650
Topic: [HOWTO] Setup a p2pool for Feathercoin (Read 14494 times)
As the repositories in this thread are either no longer available or the p2pool version provided is very old, i have created a p2pool version for Feathercoin based on the latest available p2pool version. I do intend to update this version regularly. Please let me know if you have updated your p2pool for Feathercoin to the latest version on a stable and continually running host so i could then add you to the seed hosts. Right now there is only two if my machines running as seed hosts.
Repository: https://github.com/andreasfaerber/p2pool-feathercoin
Blog / Pool Site: http://pool.maeh.org/
Regards,
MrSheep
Repository: https://github.com/andreasfaerber/p2pool-feathercoin
Blog / Pool Site: http://pool.maeh.org/
Regards,
MrSheep
To start p2pool better make this:
1.Go to directory where p2pool is installed - "cd ~/p2pool-feathercoin"
2. Run command: "python run_p2pool.py --net feathercoin -a YourFTCPayoutAddress -f 0 --give-author 0 --w 19327 --bitcoind-p2p-port 9336 --bitcoind-rpc-port 9667 rpcadmin yourgoodpasswordfromfeathercoin.confhere"
1.Go to directory where p2pool is installed - "cd ~/p2pool-feathercoin"
2. Run command: "python run_p2pool.py --net feathercoin -a YourFTCPayoutAddress -f 0 --give-author 0 --w 19327 --bitcoind-p2p-port 9336 --bitcoind-rpc-port 9667 rpcadmin yourgoodpasswordfromfeathercoin.confhere"
All what you wrote here is total bullshit,I made everything how you described, but got nothing.
i also try with python 3.3.1 ant everything that goes for him, also 32&64bit versions and still nothing
solved: it wont work on win7 x64
solved: it wont work on win7 x64
it looks like i dont have python files in system32 dir?
*do i need to run ftc, ltc, btc clients for this to work?
new error:
http://anonymouse.org/cgi-bin/anon-www.cgi/http://anonymouse.org/cgi-bin/anon-www.cgi/http://img268.imageshack.us/img268/67/wwwwwwwwwwwwwwwwwwwwa.jpg
You are running the wrong version on python. You need to run the script with python 3. You cant run it with python 2. *do i need to run ftc, ltc, btc clients for this to work?
new error:
http://anonymouse.org/cgi-bin/anon-www.cgi/http://anonymouse.org/cgi-bin/anon-www.cgi/http://img268.imageshack.us/img268/67/wwwwwwwwwwwwwwwwwwwwa.jpg
it looks like i dont have python files in system32 dir?
*do i need to run ftc, ltc, btc clients for this to work?
new error:
*do i need to run ftc, ltc, btc clients for this to work?
new error:
i get this error, someone know what it is?
since i am fckin retarded i am willing to pay 0.01BitBar (i have it in my wallet but dont know is there any fee for sending) and 5FTC for someone who help me to get FTC p2pool completely functional
since i am fckin retarded i am willing to pay 0.01BitBar (i have it in my wallet but dont know is there any fee for sending) and 5FTC for someone who help me to get FTC p2pool completely functional
do you have any files matching C:\Windows\System32\python*.dll ?
delete post
Working but doesn't seem to be many other peers
EDIT: nevermind I was following the instructions at the start of the thread with the -net litecoin flag, when I read further and installed the updated version which uses the -net feathercoin falg all is good.
EDIT: nevermind I was following the instructions at the start of the thread with the -net litecoin flag, when I read further and installed the updated version which uses the -net feathercoin falg all is good.
ImportError: cannot import name MAXREPEAT
i get this at step
cd litecoin_scrypt
C:\Python27\python.exe setup.py build --compile=mingw32 install
i get this at step
cd litecoin_scrypt
C:\Python27\python.exe setup.py build --compile=mingw32 install
will test it now, thank you for your reply
run_p2pool.py --net litecoin -a YourFTCfeePayoutAddress -f 1 --give-author 0 --w 19327 --bitcoind-p2p-port 9336 --bitcoind-rpc-port 9337 rpcadmin yourgoodpasswordfromfeathercoin.confhere
-a YourFTCfeePayoutAddress
-f x where x is the fee amount
-a YourFTCfeePayoutAddress
-f x where x is the fee amount
For the skralg's version it is needed to use:
Code:
--net feathercoin
run_p2pool.py --net litecoin -a YourFTCfeePayoutAddress -f 1 --give-author 0 --w 19327 --bitcoind-p2p-port 9336 --bitcoind-rpc-port 9337 rpcadmin yourgoodpasswordfromfeathercoin.confhere
-a YourFTCfeePayoutAddress
-f x where x is the fee amount
-a YourFTCfeePayoutAddress
-f x where x is the fee amount
did you change pool fee and how do you do it? also how you put your address to receive fee?
Could anyone throw a few hashes this way > http://ftc-cryptocoin.pagekite.me to see if it works?
I am getting 0 shares with this git clone , according to the stats page anyway.
I am getting 0 shares with this git clone , according to the stats page anyway.
It's really weird.
None of my GPUs will mine scrypt.
None, lol.
And yes, I know how to tune for scrypt.
But when I run them they never get shares and the diff is really high according to cgminer for each share.
I don't understand what the issue could be.
None of my GPUs will mine scrypt.
None, lol.
And yes, I know how to tune for scrypt.
But when I run them they never get shares and the diff is really high according to cgminer for each share.
I don't understand what the issue could be.
What does your config look like?
Here is it:
Code:
./cgminer --scrypt -o http://10.10.10.10:8080 -u x -p x --thread-concurrency 8192 -g 2 -I 13 -w 256 --gpu-engine 940,1050,1120,1120 --gpu-memclock 1350,1500,1450,1600
7970 is a second card with 1050/1500 and flashed bios.
Am I crazy or what?
I have a 7970 and when I point it to the pool it never shows an accepted share or is that normal?
Thanks for posting the link to skralg git, seems like it works.I have a 7970 and when I point it to the pool it never shows an accepted share or is that normal?
By "accepted shares" do you mean the shares in p2pool chain or the shares shown in miners? Cgminer shows a lot of shares accepted (as on the bumbox's "screenshot"), but those aren't "real" p2pool shares, afaik they're just there for hashrate calculation. It might take a while to get "real" shares with p2pool, I've setup a node and connected my home workers to it about half an hour ago, and with ~ 11 Mhash/sec I've got 5 shares accepted by p2pool so far, 2 of which are orphaned. Whether it's ok or not to have so few shares accepted I'm not sure myself, let's see how others are doing.
Am I crazy or what?
I have a 7970 and when I point it to the pool it never shows an accepted share or is that normal?
Just new blocks and work restarts.
I never mine scrypt so this is confusing me.
I have a 7970 and when I point it to the pool it never shows an accepted share or is that normal?
Just new blocks and work restarts.
I never mine scrypt so this is confusing me.
I think no.
Here is my 7970 on local node of skralg p2pool:
Code:
GPU 1: 74.0C 3702RPM | 734.4K/736.8Kh/s | A:524 R:0 HW:0 U: 31.71/m I:13
What does your config look like?
Jump to: