i need to buy S9 but i have a problem with PSU

almirfiorio

sr. member

Activity: 312

Merit: 250

you buy this power supply?
this cougar can support 6 rx-480 nitro cards?

Thanks
Almir

Quote from: mamiakimo on July 05, 2016, 11:43:34 AM

i have this power supply too
Cougar CMX1200 CGR B2-1200CM 1200W
it have 6 (PCI-E 6 pin) so it can power 2 boards

http://cougargaming.com/products/power_supplies/cougar_cmx_v3.html

mamiakimo

full member

Activity: 197

Merit: 100

i ordered EVGA SuperNOVA 1600 G2 80+ GOLD to be safe
thank you for your help

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

I would not give him any more advice as I am thinking he is a troll?

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: philipma1957 on July 06, 2016, 12:58:58 PM

Quote from: fr4nkthetank on July 06, 2016, 08:54:31 AM

Quote from: philipma1957 on July 05, 2016, 10:44:01 AM

Quote from: Erumara on July 05, 2016, 10:43:12 AM

You may be stuck buying a 1600w PC PSU which will take 120-240v.
I can't say how well they will take constant voltage changes, but if it's within the range they will certainly work.
Look up an eVGA 1600w G2, they're around $360 USD.

my method of underclocking to freq 462 and buying the evga 1300 g2 is better

he saves 160 usd maybe more.

he runs at 9.9 th vs 12.0 th

so he loses 2 th.

gear is much quieter much cooler

if it is hot desert he is well off.

2 th is going to earn 160 usd in about 7 months. So he would be ahead of the game for the next 7 months. with the evga 1300 g2 and a downclock.

plus much much much much less noise.

and less heat

This. Maximum hashrate is not optimal solution.

I gave up I led him to the water and he won't drink it.

I did the same trying to explain quality of PSU's and he kept picking new one's. I don't get the urge to use 3 or even 2 when 1 is best. The scariest one was the 3 500's he had picked.

I still worry about op's electricity "i have free electricity but its very bad which moving all the time between 185V to 220V ( using voltage stabilizer! ) without stabilizer it moving between 145V to 180V". Sounds like he's starting out with pretty bad electrical to begin with.

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: mamiakimo on July 06, 2016, 01:29:33 PM

Quote from: Tupsu on July 06, 2016, 12:43:11 PM

Do you have a free or very cheap electricity?
Do you have already a powerful enough conditioner for cooling miners?
Are you confident that in the future you will not buy more miners ?

free electricity
i will user air condition 1.5 hp in (2m*4m) room size and i will use tube like this in picture to transfer heat outside room
i can buy more in the future and put all in this room

https://i.imgsafe.org/d4df7ca9bd.png

So you want use this http://www.lg.com/my/home-air-conditioners/lg-BS-Q126HXA1
with COOLING CAPACITY 12,000 Btu/h for remove heat at least 2400W heater. (2x S9 )

Do you know that the air conditioner is going to melt mode ? 5 minutes no frost at all.

I hope your air conditioner is with good warranty.
But you do not have to worry about it . LG Inverter does not work with 180V

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: drazah on July 06, 2016, 01:35:17 PM

Quote from: traxor on July 05, 2016, 04:57:03 PM

Hey Phillip...

I noticed your strong advocation for down clocking...

A little off topic for the thread -- but:

I live in an ungodly large home for just 2 people -- so the noise isn't even heard 99% of the time...

However, I am plugging in a 1600W PSU into just a regular outlet (20 Amp circuit) for my S9. I've seen some of the awful pictures of other miners that burned -- Am I OK? Or should I consider sliding the scale down just a bit...

I know it says that it pulls 1300W -- but every time I check the kilowatt meter, it was between 1138W and 1194W -- temps are fine (air conditioned environment)...

I know that you are an expert -- and reading your advice about down clocking kind of mentally set me back a bit...

I'd like to hash as much as possible -- without risk...

Thanks!!!

Im currently hosting my S9 at my house now using an EVGA g2 1600W from a wall outlet also. I chose to underclock for this exact reason, and also just to be safe. I saw a lot of Phils posts saying that they should be underclocked for many reasons

these are the batches. all have 189 chips all have 2 fans

if bitmaintech made the clocks drop from 650 to 550 and kept the fans and the chips the same it seems like common sense to clock them all close the the batch 5 number of 550 rather then the batch 1 number of 650

batch 1 14.0th freq 650
batch 2 12.93th freq 600
batch 3 12.93th freq 600
batch 4 12.93th freq 600
batch 5 11.85th freq 550

my one at home is clocked to 462 until I move it to the array

my four at the array are clocked at 600 with monster fans action.

drazah

newbie

Activity: 54

Merit: 0

Quote from: traxor on July 05, 2016, 04:57:03 PM

Hey Phillip...

I noticed your strong advocation for down clocking...

A little off topic for the thread -- but:

I live in an ungodly large home for just 2 people -- so the noise isn't even heard 99% of the time...

However, I am plugging in a 1600W PSU into just a regular outlet (20 Amp circuit) for my S9. I've seen some of the awful pictures of other miners that burned -- Am I OK? Or should I consider sliding the scale down just a bit...

I know it says that it pulls 1300W -- but every time I check the kilowatt meter, it was between 1138W and 1194W -- temps are fine (air conditioned environment)...

I know that you are an expert -- and reading your advice about down clocking kind of mentally set me back a bit...

I'd like to hash as much as possible -- without risk...

Thanks!!!

Im currently hosting my S9 at my house now using an EVGA g2 1600W from a wall outlet also. I chose to underclock for this exact reason, and also just to be safe. I saw a lot of Phils posts saying that they should be underclocked for many reasons

mamiakimo

full member

Activity: 197

Merit: 100

Quote from: Tupsu on July 06, 2016, 12:43:11 PM

Quote from: mamiakimo on July 06, 2016, 12:32:45 PM

Quote from: Tupsu on July 06, 2016, 12:25:44 PM

Quote from: mamiakimo on July 06, 2016, 11:58:12 AM

i will use ADD2PSU to make all psu open together
and i will user air condition to cooling miner

Air conditioning is not a good idea for mining.

why ?

Do you have a free or very cheap electricity?
Do you have already a powerful enough conditioner for cooling miners?
Are you confident that in the future you will not buy more miners ?

free electricity
i will user air condition 1.5 hp in (2m*4m) room size and i will use tube like this in picture to transfer heat outside room
i can buy more in the future and put all in this room

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: fr4nkthetank on July 06, 2016, 08:54:31 AM

Quote from: philipma1957 on July 05, 2016, 10:44:01 AM

Quote from: Erumara on July 05, 2016, 10:43:12 AM

You may be stuck buying a 1600w PC PSU which will take 120-240v.
I can't say how well they will take constant voltage changes, but if it's within the range they will certainly work.
Look up an eVGA 1600w G2, they're around $360 USD.

my method of underclocking to freq 462 and buying the evga 1300 g2 is better

he saves 160 usd maybe more.

he runs at 9.9 th vs 12.0 th

so he loses 2 th.

gear is much quieter much cooler

if it is hot desert he is well off.

2 th is going to earn 160 usd in about 7 months. So he would be ahead of the game for the next 7 months. with the evga 1300 g2 and a downclock.

plus much much much much less noise.

and less heat

This. Maximum hashrate is not optimal solution.

I gave up I led him to the water and he won't drink it.

alh

legendary

Activity: 1846

Merit: 1052

Quote from: mamiakimo on July 06, 2016, 12:32:45 PM

Quote from: Tupsu on July 06, 2016, 12:25:44 PM

Quote from: mamiakimo on July 06, 2016, 11:58:12 AM

i will use ADD2PSU to make all psu open together
and i will user air condition to cooling miner

Air conditioning is not a good idea for mining.

why ?

It's probably best to say that "Air Conditioning is not cost effective" for mining. It isn't bad in the sense that it will damage your mining hardware, or decrease your hash rate.

One way to think of it is that you can think of an S9 as a 1500W heater. Would you want run a 1500W in a room that you are trying to keep cool? In general, the answer is no.

Depending on your environment, you may or may not have much choice. Just consider this in your planning.

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: mamiakimo on July 06, 2016, 12:32:45 PM

Quote from: Tupsu on July 06, 2016, 12:25:44 PM

Quote from: mamiakimo on July 06, 2016, 11:58:12 AM

i will use ADD2PSU to make all psu open together
and i will user air condition to cooling miner

Air conditioning is not a good idea for mining.

why ?

Do you have a free or very cheap electricity?
Do you have already a powerful enough conditioner for cooling miners?
Are you confident that in the future you will not buy more miners ?

mamiakimo

full member

Activity: 197

Merit: 100

Quote from: Tupsu on July 06, 2016, 12:25:44 PM

Quote from: mamiakimo on July 06, 2016, 11:58:12 AM

i will use ADD2PSU to make all psu open together
and i will user air condition to cooling miner

Air conditioning is not a good idea for mining.

why ?

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: mamiakimo on July 06, 2016, 11:58:12 AM

i will use ADD2PSU to make all psu open together
and i will user air condition to cooling miner

Air conditioning is not a good idea for mining.

mamiakimo

full member

Activity: 197

Merit: 100

Quote from: Tupsu on July 06, 2016, 09:35:57 AM

Quote from: mamiakimo on July 06, 2016, 06:47:16 AM

i will get 3 EVGA 1000GQ 80+ GOLD from amazon
but how to use 3 PSU EVGA 1000GQ 80+ GOLD to power 2 antminer S9 ?
each EVGA have only 6 PCIe ( power 2 boards )
how to power the controller on both miner ? i still need 2 PCIe

At Your own risk. if the one PSU which gives power to controller shuts down, and 2 blades stil receive electricity from the second PSU, then these two blades overheating and may burn down. (Happened to me with several S7)

i will use ADD2PSU to make all psu open together
and i will user air condition to cooling miner

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: mamiakimo on July 06, 2016, 06:47:16 AM

i will get 3 EVGA 1000GQ 80+ GOLD from amazon
but how to use 3 PSU EVGA 1000GQ 80+ GOLD to power 2 antminer S9 ?
each EVGA have only 6 PCIe ( power 2 boards )
how to power the controller on both miner ? i still need 2 PCIe

At Your own risk. if the one PSU which gives power to controller shuts down, and 2 blades stil receive electricity from the second PSU, then these two blades overheating and may burn down. (Happened to me with several S7)

fr4nkthetank

legendary

Activity: 2294

Merit: 1182

Now the money is free, and so the people will be

Quote from: philipma1957 on July 05, 2016, 10:44:01 AM

Quote from: Erumara on July 05, 2016, 10:43:12 AM

You may be stuck buying a 1600w PC PSU which will take 120-240v.
I can't say how well they will take constant voltage changes, but if it's within the range they will certainly work.
Look up an eVGA 1600w G2, they're around $360 USD.

my method of underclocking to freq 462 and buying the evga 1300 g2 is better

he saves 160 usd maybe more.

he runs at 9.9 th vs 12.0 th

so he loses 2 th.

gear is much quieter much cooler

if it is hot desert he is well off.

2 th is going to earn 160 usd in about 7 months. So he would be ahead of the game for the next 7 months. with the evga 1300 g2 and a downclock.

plus much much much much less noise.

and less heat

This. Maximum hashrate is not optimal solution.

mamiakimo

full member

Activity: 197

Merit: 100

i will get 3 EVGA 1000GQ 80+ GOLD from amazon
but how to use 3 PSU EVGA 1000GQ 80+ GOLD to power 2 antminer S9 ?
each EVGA have only 6 PCIe ( power 2 boards )
how to power the controller on both miner ? i still need 2 PCIe

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: mamiakimo on July 05, 2016, 09:13:27 PM

can i power two board with EVGA SuperNOVA 850 ?

Technically, yes. If you use it for S9 Batch5
but better PSU for that is Corsair RM1000
and for one board and controller buy Corsair CX750 (Not 500, 600 )

You Must use a circuit is controller said PSU shuts down, that it turns out the second PSU.

http://www.add2psu.com/

http://www.extremetech.com/computing/91808-add2psu-how-to-combine-multiple-power-supplies-in-a-single-computer

talks_cheep

legendary

Activity: 1036

Merit: 1000

Let him go with Cooler Master PSU, it's a free forum where he belongs. If he comes back here crying, my miner burnt down my house, then we'd know for sure Cooler Master really sux!!!

mamiakimo

full member

Activity: 197

Merit: 100

Cooler Master V-Series is the Seasonic KM3 unit internally
http://aphnetworks.com/reports/cooler_master_v1000_1000w/3

mamiakimo

full member

Activity: 197

Merit: 100

can i power two board with EVGA SuperNOVA 850 ?

notlist3d

legendary

Activity: 1456

Merit: 1000

The RM1000 is used by many miner's it has been tested. The Cool Master V1000 may be a fine PSU but honestly don't think it's of the same quality. But neither of these are really what people are using for S7/S9's. So it is kinda a moot point, but it certainty is better then the 3 x 500's you were looking at.

No offense is meant but you have gotten SO many good options mentioned on what to pick. Your local market might not have them, but ordering online and getting them is worth it. I just am going to wish you luck. You can lead a horse to water but you can't make it drink.

mamiakimo

full member

Activity: 197

Merit: 100

i found EVGA SuperNOVA 1050 GS Gold PSU

mamiakimo

full member

Activity: 197

Merit: 100

Quote from: notlist3d on July 05, 2016, 05:31:26 PM

Quote from: mamiakimo on July 05, 2016, 04:52:49 PM

Quote from: philipma1957 on July 05, 2016, 04:44:21 PM

Quote from: mamiakimo on July 05, 2016, 03:27:49 PM

after reading many other experiences
i can power 2 Antminer with 3 PSU 1000W connected by (Add2PSU)
https://www.amazon.com/Add2PSU-Multiple-Power-Supply-Adapter/dp/B009P98Q8U/ref=sr_1_1?ie=UTF8&qid=1467744817&sr=8-1&keywords=add2psu

many users here using CORSAIR RM1000
its same quality as cool master v1000
search in google (rm1000 vs v1000)

the rm1000 is a lot better quality then the 500 watt unit you mentioned.

but getting 3 to run 2 s-9's and using the amazon part is not what I would do.

good luck.

i talk about Cooler master V1000
its more efficiency

I do not think your right on RM1000 and your cooler master being of same quality. I have owned a few of the RM1000's they are good quality but I also use them for video cards/smaller miners not a S7/S9.

Your really going the wrong route with these budget PSU's on a brand new S9. You have a LOT of good advice and reason's why people choose quality PSU's. In the end we cannot stop you from buying cheap PSU's but if it goes wrong you really are going to wish you went for a quality PSU.

You might read warranty on S9 just the voltage surges would void warranty. I'm not sure why you want to add poor power supply on it, realize your buying a PSU that can last multiple miners. Or be sold after... all these ideas of cheap PSU's, adapters of unknown quality, ontop of your voltage scare me personally.

cooler master v1000 is not a cheap PSU
its same rm1000 price ( about 200$ ) and its 5 year warranty
http://www.coolermaster.com/powersupply/v-series-psu/v1000/
http://www.newegg.com/Product/Product.aspx?Item=N82E16817171078

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: mamiakimo on July 05, 2016, 04:52:49 PM

Quote from: philipma1957 on July 05, 2016, 04:44:21 PM

Quote from: mamiakimo on July 05, 2016, 03:27:49 PM

after reading many other experiences
i can power 2 Antminer with 3 PSU 1000W connected by (Add2PSU)
https://www.amazon.com/Add2PSU-Multiple-Power-Supply-Adapter/dp/B009P98Q8U/ref=sr_1_1?ie=UTF8&qid=1467744817&sr=8-1&keywords=add2psu

many users here using CORSAIR RM1000
its same quality as cool master v1000
search in google (rm1000 vs v1000)

the rm1000 is a lot better quality then the 500 watt unit you mentioned.

but getting 3 to run 2 s-9's and using the amazon part is not what I would do.

good luck.

i talk about Cooler master V1000
its more efficiency

I do not think your right on RM1000 and your cooler master being of same quality. I have owned a few of the RM1000's they are good quality but I also use them for video cards/smaller miners not a S7/S9.

Your really going the wrong route with these budget PSU's on a brand new S9. You have a LOT of good advice and reason's why people choose quality PSU's. In the end we cannot stop you from buying cheap PSU's but if it goes wrong you really are going to wish you went for a quality PSU.

You might read warranty on S9 just the voltage surges would void warranty. I'm not sure why you want to add poor power supply on it, realize your buying a PSU that can last multiple miners. Or be sold after... all these ideas of cheap PSU's, adapters of unknown quality, ontop of your voltage scare me personally.

traxor

full member

Activity: 228

Merit: 100

Hey Phillip...

I noticed your strong advocation for down clocking...

A little off topic for the thread -- but:

I live in an ungodly large home for just 2 people -- so the noise isn't even heard 99% of the time...

However, I am plugging in a 1600W PSU into just a regular outlet (20 Amp circuit) for my S9. I've seen some of the awful pictures of other miners that burned -- Am I OK? Or should I consider sliding the scale down just a bit...

I know it says that it pulls 1300W -- but every time I check the kilowatt meter, it was between 1138W and 1194W -- temps are fine (air conditioned environment)...

I know that you are an expert -- and reading your advice about down clocking kind of mentally set me back a bit...

I'd like to hash as much as possible -- without risk...

Thanks!!!

mamiakimo

full member

Activity: 197

Merit: 100

Quote from: philipma1957 on July 05, 2016, 04:44:21 PM

Quote from: mamiakimo on July 05, 2016, 03:27:49 PM

after reading many other experiences
i can power 2 Antminer with 3 PSU 1000W connected by (Add2PSU)
https://www.amazon.com/Add2PSU-Multiple-Power-Supply-Adapter/dp/B009P98Q8U/ref=sr_1_1?ie=UTF8&qid=1467744817&sr=8-1&keywords=add2psu

many users here using CORSAIR RM1000
its same quality as cool master v1000
search in google (rm1000 vs v1000)

the rm1000 is a lot better quality then the 500 watt unit you mentioned.

but getting 3 to run 2 s-9's and using the amazon part is not what I would do.

good luck.

i talk about Cooler master V1000
its more efficiency

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: mamiakimo on July 05, 2016, 03:27:49 PM

after reading many other experiences
i can power 2 Antminer with 3 PSU 1000W connected by (Add2PSU)
https://www.amazon.com/Add2PSU-Multiple-Power-Supply-Adapter/dp/B009P98Q8U/ref=sr_1_1?ie=UTF8&qid=1467744817&sr=8-1&keywords=add2psu

many users here using CORSAIR RM1000
its same quality as cool master v1000
search in google (rm1000 vs v1000)

the rm1000 is a lot better quality then the 500 watt unit you mentioned.

but getting 3 to run 2 s-9's and using the amazon part is not what I would do.

good luck.

mamiakimo

full member

Activity: 197

Merit: 100

after reading many other experiences
i can power 2 Antminer with 3 PSU 1000W connected by (Add2PSU)
https://www.amazon.com/Add2PSU-Multiple-Power-Supply-Adapter/dp/B009P98Q8U/ref=sr_1_1?ie=UTF8&qid=1467744817&sr=8-1&keywords=add2psu

many users here using CORSAIR RM1000
its same quality as cool master v1000
search in google (rm1000 vs v1000)

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: mamiakimo on July 05, 2016, 11:10:49 AM

they said (Power supply unit is not included. You will need an ATX PSU. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!)

i think about using 3 PSU (cooler master Extreme Power Plus 500W)
each one have 1 PCI-6
and i will use pci 4 to 6 adapter to get the other

what is your opinion ?

obey me or die. this is a joke Grin

All kidding aside if you live in the usa and want to do that it would be really stupid cheap.

but since you said you have 140 to 180 volt power you don't live in the usa

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: mamiakimo on July 05, 2016, 11:50:44 AM

this is my best choice and available in our market ( Cooler Master V1000 / 1000W )
http://www.coolermaster.com/powersupply/v-series-psu/v1000/

Most likely you will need to order online on a PSU for a S7/S9. It depends on your market some have great local store's. But me personally I can order from newegg or amazon and get cheaper then local market and better quality.

You really need to get a quality PSU to go with your S9, I like the recommended APW3 but again with your voltage going up/down under 205V it's not a option. (Your voltage kinda scares me with such large varience, makes me wonder of quality of electricity). But again look at the EVGA ones mentioned... don't go for these low quality PSU's.

Ever since you mentioned 3 PSU (cooler master Extreme Power Plus 500W) + unknown quality adapters your PSU selecting has really scared me.

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: mamiakimo on July 05, 2016, 11:10:49 AM

they said (Power supply unit is not included. You will need an ATX PSU. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!)

i think about using 3 PSU (cooler master Extreme Power Plus 500W)
each one have 1 PCI-6
and i will use pci 4 to 6 adapter to get the other

what is your opinion ?

My opinion is, you get flaming cables and burned plugs .

Quote from: mamiakimo on July 05, 2016, 11:50:44 AM

this is my best choice and available in our market ( Cooler Master V1000 / 1000W )
http://www.coolermaster.com/powersupply/v-series-psu/v1000/

You still get burned plugs possble on both ends. This is not a good PSU. I have used them a couple of pieces with EVGA G2 cables
which are directly tinned to PSU. Then it is durable and reliable for 2x S7 blades.
But after all, you're not going to get a new PSU to replace the cables. I got mine used with KNC Jupiters long time ago.

Read also this thread

https://bitcointalksearch.org/topic/beware-bitmain-s7s9-failures-and-lack-of-warranty-1540037

mamiakimo

full member

Activity: 197

Merit: 100

this is my best choice and available in our market ( Cooler Master V1000 / 1000W )
http://www.coolermaster.com/powersupply/v-series-psu/v1000/

mamiakimo

full member

Activity: 197

Merit: 100

i have this power supply too
Cougar CMX1200 CGR B2-1200CM 1200W
it have 6 (PCI-E 6 pin) so it can power 2 boards

http://cougargaming.com/products/power_supplies/cougar_cmx_v3.html

traxor

full member

Activity: 228

Merit: 100

I just bought the EVGA 1600 and it works fine -- already comes with all the cables necessary.

I did opt for the ATX 24 Pin bridge ($5) rather than using the paper clip method.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: mamiakimo on July 05, 2016, 11:10:49 AM

they said (Power supply unit is not included. You will need an ATX PSU. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!)

i think about using 3 PSU (cooler master Extreme Power Plus 500W)
each one have 1 PCI-6
and i will use pci 4 to 6 adapter to get the other

what is you opinion ?

Buy a quality PSU using 3 not so good ATX psu's... just is not way to go. You are spending good money on a nice miner, getting a quality PSU is really something you should do with that.

Reading your first post the APW3 is not a option as it going under 205V it is not made to operate. So what they recommend and I have been using is not a option for you. Look up again at the nice EVGA's mentioned there is a reason why people are recommending good PSU's. I personally would go for the 1600 and not underclock but that is just me. The other is a option aswell.

But PSU's if you treat good you can use for multiple generations of miners, or sell just keep boxes and all your accessories. I would not touch let those cheap PSU's you mention and adapters (which we don't know quality of as no link) touch a new S9. Just wrong way to start mining with it.

mamiakimo

full member

Activity: 197

Merit: 100

i have also HEC Cougar CMX 1000W PSU
so i can use 3 PSU to power 2 Antminer like here
https://bitcointalksearch.org/topic/m.12876759

mamiakimo

full member

Activity: 197

Merit: 100

they said (Power supply unit is not included. You will need an ATX PSU. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!)

i think about using 3 PSU (cooler master Extreme Power Plus 500W)
each one have 1 PCI-6
and i will use pci 4 to 6 adapter to get the other

what is your opinion ?

Finksy

legendary

Activity: 1022

Merit: 1003

Quote from: philipma1957 on July 05, 2016, 10:59:19 AM

Quote from: Finksy on July 05, 2016, 10:55:52 AM

Don't buy a new miner only to under-clock it, you are essentially throwing money away if you don't gain any efficiency on it (which you can't unless you are able to provide lower than 12V through PSU)

no that is not always true.

i can show multiple cases where it is the correct solution.

this is one right here.

the math favors him to buy the evga 1300g2 not the evga1600 g2

That only applies if you are factoring the PSU price into your ROI. Depending on your long-term intentions, PSU's can be considered equity whose actual depreciation can be subsidized over multiple generations. If you are in it for a long time, you don't need to pay off the PSU with one generation of miner. By under-clocking your miner you are reducing it's value immediately, and have already lost money. If all of what he said was true, he may be better off finding a hosting solution for the same price/kW as he pays for electricity and not have to worry about power woes or varying voltage. Pretty much all hosting facilities have access to stable 200+V, which opens the door for WAY more cost-effective PSU's than the EVGA's by a huge factor.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: Finksy on July 05, 2016, 10:55:52 AM

Don't buy a new miner only to under-clock it, you are essentially throwing money away if you don't gain any efficiency on it (which you can't unless you are able to provide lower than 12V through PSU)

no that is not always true.

i can show multiple cases where it is the correct solution.

this is one right here.

the math favors him to buy the evga 1300g2 not the evga1600 g2

Finksy

legendary

Activity: 1022

Merit: 1003

Don't buy a new miner only to under-clock it, you are essentially throwing money away if you don't gain any efficiency on it (which you can't unless you are able to provide lower than 12V through PSU)

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: Erumara on July 05, 2016, 10:43:12 AM

You may be stuck buying a 1600w PC PSU which will take 120-240v.
I can't say how well they will take constant voltage changes, but if it's within the range they will certainly work.
Look up an eVGA 1600w G2, they're around $360 USD.

my method of underclocking to freq 462 and buying the evga 1300 g2 is better

he saves 160 usd maybe more.

he runs at 9.9 th vs 12.0 th

so he loses 2 th.

gear is much quieter much cooler

if it is hot desert he is well off.

2 th is going to earn 160 usd in about 7 months. So he would be ahead of the game for the next 7 months. with the evga 1300 g2 and a downclock.

plus much much much much less noise.

and less heat

Erumara

full member

Activity: 140

Merit: 100

I mine because math

You may be stuck buying a 1600w PC PSU which will take 120-240v.
I can't say how well they will take constant voltage changes, but if it's within the range they will certainly work.
Look up an eVGA 1600w G2, they're around $360 USD.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: mamiakimo on July 05, 2016, 10:35:23 AM

hi,

bitmain APW3-12-1600-B2 have this note (The PSU cannot be used in countries with a mains power voltage lower than 205V. The PSU will not start below this voltage. And power cord is not included, please find one with at least 16A from your local market.)

i have free electricity but its very bad which moving all the time between 185V to 220V ( using voltage stabilizer! )
without stabilizer it moving between 145V to 180V

now, what is the best solution for this situation

A) tell us what country So I can figure what psu will ship to you.

B) do not use the APW3-12-1600-B2

C) read on underclock of the s-9

https://bitcointalksearch.org/topic/s9-ln-1534854

D) if you are willing to run at an underclock the s-9 at freq 462 uses 1080 watts at the wall and hashes close to 9.9th

E) all of the above means the EVGA 1300 g2 a 1300 watt psu should do the job if you clock at freq 462

it uses 110 volts to 240 volts let me find the exact number make that 100 to 240 volts.

http://www.evga.com/Products/Product.aspx?pn=120-G2-1300-XR

mamiakimo

full member

Activity: 197

Merit: 100

hi,

bitmain APW3-12-1600-B2 have this note (The PSU cannot be used in countries with a mains power voltage lower than 205V. The PSU will not start below this voltage. And power cord is not included, please find one with at least 16A from your local market.)

i have free electricity but its very bad which moving all the time between 185V to 220V ( using voltage stabilizer! )
without stabilizer it moving between 145V to 180V

now, what is the best solution for this situation

Topic: i need to buy S9 but i have a problem with PSU (Read 2966 times)