Topic: i quit - page 59. (Read 142559 times)

Quote from: aquitasIJ on April 16, 2015, 07:48:29 PM

Quote from: aquitasIJ on April 16, 2015, 07:38:17 PM

Quote from: MinerFTW on April 16, 2015, 08:04:43 PM

Ok,if all is fine Dev tell me how me salvage my wallet.dat? It's corrupt on forked chain when I'm not do "dumpprivatekey" command. How its can be back up now? I need help here.

does it tell you that its corrupt?
does it start while the wallet.dat is in there? or does it give you an error?

It's on start tell that it corrupt and cannot salvage it. After restart with new wallet.dat file my current wallet.dat changed to wallet.12467874.bak and its same situation with all copies of my address on few OS. Command from prompt "Salvagewallet" and rescan not take any positive effect.

Oh
Do you have a backup of the wallet?
Save the wallet.12467874.bak somewhere safe also
try using a backup of the wallet
do you have any backup? Sad

it can be fixed either way, but its much easier for you if you have backups

I have versions of my wallet.dat only copied in different time.

that can work because it holds many of your keys. as long as you did not create a hundred addresses after then it should work.
put it in and test

lol I'm create only one address. So totally I have it two.

In what? And how I must put it? Like wallet.dat or like .bak? In the same wallet version? Im cannot find current litedoged link around 5 hours guy cannot answer me here on that simple question. MinerTWX are you blind? I'm ask you third time that now,you are so busy? Answer all around only not on my posts lol.

not.you

legendary

Activity: 1726

Merit: 1018

change version of wallet and chainparams.cpp so ppl get on that 1 always. that server is running over 400 days already and never been offline.

is there a way to make more of these nodes as seeds? i have multiple servers for it.

We need some way to not have the coin totally dependent on a single server always being on. Is there not a way to do more than one checkpoint server? Is there a way to change the wallet code so that it can prevent the constant forking but not depend on that server always being on?

Sooner or later, something will bring down the server (internet outage, extended power outage, OS crash). Always 100% uptime forever is not realistic.

MinerFTW

sr. member

Activity: 462

Merit: 250

Quote from: aquitasIJ on April 16, 2015, 08:08:13 PM

Quote from: MinerFTW on April 16, 2015, 08:04:43 PM

change version of wallet and chainparams.cpp so ppl get on that 1 always. that server is running over 400 days already and never been offline.

is there a way to make more of these nodes as seeds? i have multiple servers for it.

Ok
But don't put the checkpointing private key in any node, except 1 only.
Can you make 2 more normal nodes to put in the source?
But don't put the checkpointing private key in those.

Also you can try making a cronjob to tell it to start the daemon every 10 minutes.
That way if its off it would turn on. and if its on then it wouldn't do anything.

it is in daemon mode. it won't turn off from now anymore it will keep running 24/7 now.

i have my other servers online also and 1 i use for staking myself also and a poolserver so those will contain the node also.

other ip is
93.157.4.11

compiling there new 1 now also.

mellon

legendary

Activity: 1014

Merit: 1002

Quel marth Melloneamin

Quote from: aquitasIJ on April 16, 2015, 07:59:35 PM

Quote from: aquitasIJ on April 16, 2015, 07:48:29 PM

Quote from: aquitasIJ on April 16, 2015, 07:38:17 PM

Quote from: MinerFTW on April 16, 2015, 08:04:43 PM

Ok,if all is fine Dev tell me how me salvage my wallet.dat? It's corrupt on forked chain when I'm not do "dumpprivatekey" command. How its can be back up now? I need help here.

does it tell you that its corrupt?
does it start while the wallet.dat is in there? or does it give you an error?

It's on start tell that it corrupt and cannot salvage it. After restart with new wallet.dat file my current wallet.dat changed to wallet.12467874.bak and its same situation with all copies of my address on few OS. Command from prompt "Salvagewallet" and rescan not take any positive effect.

Oh
Do you have a backup of the wallet?
Save the wallet.12467874.bak somewhere safe also
try using a backup of the wallet
do you have any backup? Sad

it can be fixed either way, but its much easier for you if you have backups

I have versions of my wallet.dat only copied in different time.

that can work because it holds many of your keys. as long as you did not create a hundred addresses after then it should work.
put it in and test

lol I'm create only one address. So totally I have it two.

aquitasIJ

member

Activity: 112

Merit: 10

change version of wallet and chainparams.cpp so ppl get on that 1 always. that server is running over 400 days already and never been offline.

is there a way to make more of these nodes as seeds? i have multiple servers for it.

Ok
But don't put the checkpointing private key in any node, except 1 only.
Can you make 2 more normal nodes to put in the source?
But don't put the checkpointing private key in those.

Also you can try making a cronjob to tell it to start the daemon every 10 minutes.
That way if its off it would turn on. and if its on then it wouldn't do anything.

MinerFTW

sr. member

Activity: 462

Merit: 250

change version of wallet and chainparams.cpp so ppl get on that 1 always. that server is running over 400 days already and never been offline.

is there a way to make more of these nodes as seeds? i have multiple servers for it.

aquitasIJ

member

Activity: 112

Merit: 10

Quote from: MinerFTW on April 16, 2015, 07:58:53 PM

oke node with priv key in it is up to explorer chain

litedoged getinfo
{
"version" : "v1.0.0.1-g32a928e",
"protocolversion" : 60015,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 43653,
"timeoffset" : -104,
"moneysupply" : 2814681399.05499983,
"connections" : 6,
"proxy" : "",
"ip" : "91.121.6.19",
"difficulty" : {
"proof-of-work" : 153.05769441,
"proof-of-stake" : 2592420.64269698
},
"testnet" : false,
"keypoololdest" : 1429231614,
"keypoolsize" : 101,
"paytxfee" : 0.99000000,
"mininput" : 0.00000000,
"errors" : ""

Thank you MinerFTW

Everyone if you are not on the same chain, put addnode=91.121.6.19 in your conf and resync

aquitasIJ

member

Activity: 112

Merit: 10

Quote from: aquitasIJ on April 16, 2015, 07:48:29 PM

Quote from: aquitasIJ on April 16, 2015, 07:38:17 PM

Quote from: mellon on April 16, 2015, 07:49:19 PM

Ok,if all is fine Dev tell me how me salvage my wallet.dat? It's corrupt on forked chain when I'm not do "dumpprivatekey" command. How its can be back up now? I need help here.

does it tell you that its corrupt?
does it start while the wallet.dat is in there? or does it give you an error?

It's on start tell that it corrupt and cannot salvage it. After restart with new wallet.dat file my current wallet.dat changed to wallet.12467874.bak and its same situation with all copies of my address on few OS. Command from prompt "Salvagewallet" and rescan not take any positive effect.

Oh
Do you have a backup of the wallet?
Save the wallet.12467874.bak somewhere safe also
try using a backup of the wallet
do you have any backup? Sad

it can be fixed either way, but its much easier for you if you have backups

I have versions of my wallet.dat only copied in different time.

that can work because it holds many of your keys. as long as you did not create a hundred addresses after then it should work.
put it in and test

MinerFTW

sr. member

Activity: 462

Merit: 250

oke node with priv key in it is up to explorer chain

litedoged getinfo
{
"version" : "v1.0.0.1-g32a928e",
"protocolversion" : 60015,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 43653,
"timeoffset" : -104,
"moneysupply" : 2814681399.05499983,
"connections" : 6,
"proxy" : "",
"ip" : "91.121.6.19",
"difficulty" : {
"proof-of-work" : 153.05769441,
"proof-of-stake" : 2592420.64269698
},
"testnet" : false,
"keypoololdest" : 1429231614,
"keypoolsize" : 101,
"paytxfee" : 0.99000000,
"mininput" : 0.00000000,
"errors" : ""

luongdk

full member

Activity: 686

Merit: 102

Quote from: luongdk on April 16, 2015, 07:46:49 PM

Quote from: aquitasIJ on April 16, 2015, 07:38:17 PM

Ok,if all is fine Dev tell me how me salvage my wallet.dat? It's corrupt on forked chain when I'm not do "dumpprivatekey" command. How its can be back up now? I need help here.

does it tell you that its corrupt?
does it start while the wallet.dat is in there? or does it give you an error?

It's on start tell that it corrupt and cannot salvage it. After restart with new wallet.dat file my current wallet.dat changed to wallet.12467874.bak and its same situation with all copies of my address on few OS. Command from prompt "Salvagewallet" and rescan not take any positive effect.

mellon, if you trust me, you can send corrupt wallet.dat to me then I will try dump on my PC. Will be at work 1h from now.

You can pm me for details what need to do and I'm here promise to send you back 5% of my balance for your attention if it's would take effect.

Sent you in PM. Will be back after 1 hour

mellon

legendary

Activity: 1014

Merit: 1002

Quel marth Melloneamin

Quote from: aquitasIJ on April 16, 2015, 07:48:29 PM

Quote from: aquitasIJ on April 16, 2015, 07:38:17 PM

Quote from: aquitasIJ on April 16, 2015, 07:48:29 PM

Ok,if all is fine Dev tell me how me salvage my wallet.dat? It's corrupt on forked chain when I'm not do "dumpprivatekey" command. How its can be back up now? I need help here.

does it tell you that its corrupt?
does it start while the wallet.dat is in there? or does it give you an error?

It's on start tell that it corrupt and cannot salvage it. After restart with new wallet.dat file my current wallet.dat changed to wallet.12467874.bak and its same situation with all copies of my address on few OS. Command from prompt "Salvagewallet" and rescan not take any positive effect.

Oh
Do you have a backup of the wallet?
Save the wallet.12467874.bak somewhere safe also
try using a backup of the wallet
do you have any backup? Sad

it can be fixed either way, but its much easier for you if you have backups

I have versions of my wallet.dat only copied in different time.

I'm save all versions of .bak files but in logs I'm returned answer all time when I try to recover my private key that my database log file have errors and it's cannot turn wallet.dat on right .back on different blocks,(current Txid not find or false)

mellon

legendary

Activity: 1014

Merit: 1002

Quel marth Melloneamin

Quote from: aquitasIJ on April 16, 2015, 07:38:17 PM

Quote from: luongdk on April 16, 2015, 07:46:49 PM

Ok,if all is fine Dev tell me how me salvage my wallet.dat? It's corrupt on forked chain when I'm not do "dumpprivatekey" command. How its can be back up now? I need help here.

does it tell you that its corrupt?
does it start while the wallet.dat is in there? or does it give you an error?

It's on start tell that it corrupt and cannot salvage it. After restart with new wallet.dat file my current wallet.dat changed to wallet.12467874.bak and its same situation with all copies of my address on few OS. Command from prompt "Salvagewallet" and rescan not take any positive effect.

Oh
Do you have a backup of the wallet?
Save the wallet.12467874.bak somewhere safe also
try using a backup of the wallet
do you have any backup? Sad

it can be fixed either way, but its much easier for you if you have backups

I have versions of my wallet.dat only copied in different time.

mellon

legendary

Activity: 1014

Merit: 1002

Quel marth Melloneamin

Quote from: aquitasIJ on April 16, 2015, 07:38:17 PM

Ok,if all is fine Dev tell me how me salvage my wallet.dat? It's corrupt on forked chain when I'm not do "dumpprivatekey" command. How its can be back up now? I need help here.

does it tell you that its corrupt?
does it start while the wallet.dat is in there? or does it give you an error?

It's on start tell that it corrupt and cannot salvage it. After restart with new wallet.dat file my current wallet.dat changed to wallet.12467874.bak and its same situation with all copies of my address on few OS. Command from prompt "Salvagewallet" and rescan not take any positive effect.

mellon, if you trust me, you can send corrupt wallet.dat to me then I will try dump on my PC. Will be at work 1h from now.

You can pm me for details what need to do and I'm here promise to send you back 5% of my balance for your attention if it's would take effect.

aquitasIJ

member

Activity: 112

Merit: 10

Quote from: aquitasIJ on April 16, 2015, 07:38:17 PM

Ok,if all is fine Dev tell me how me salvage my wallet.dat? It's corrupt on forked chain when I'm not do "dumpprivatekey" command. How its can be back up now? I need help here.

does it tell you that its corrupt?
does it start while the wallet.dat is in there? or does it give you an error?

It's on start tell that it corrupt and cannot salvage it. After restart with new wallet.dat file my current wallet.dat changed to wallet.12467874.bak and its same situation with all copies of my address on few OS. Command from prompt "Salvagewallet" and rescan not take any positive effect.

Oh
Do you have a backup of the wallet?
Save the wallet.12467874.bak somewhere safe also
try using a backup of the wallet
do you have any backup? Sad

it can be fixed either way, but its much easier for you if you have backups

luongdk

full member

Activity: 686

Merit: 102

Quote from: aquitasIJ on April 16, 2015, 07:38:17 PM

Quote from: aquitasIJ on April 16, 2015, 07:38:17 PM

Ok,if all is fine Dev tell me how me salvage my wallet.dat? It's corrupt on forked chain when I'm not do "dumpprivatekey" command. How its can be back up now? I need help here.

does it tell you that its corrupt?
does it start while the wallet.dat is in there? or does it give you an error?

It's on start tell that it corrupt and cannot salvage it. After restart with new wallet.dat file my current wallet.dat changed to wallet.12467874.bak and its same situation with all copies of my address on few OS. Command from prompt "Salvagewallet" and rescan not take any positive effect.

mellon, if you trust me, you can send corrupt wallet.dat to me then I will try to dump on my PC. Will be at work 1h from now.

mellon

legendary

Activity: 1014

Merit: 1002

Quel marth Melloneamin

Quote from: luongdk on April 16, 2015, 07:38:56 PM

Ok,if all is fine Dev tell me how me salvage my wallet.dat? It's corrupt on forked chain when I'm not do "dumpprivatekey" command. How its can be back up now? I need help here.

does it tell you that its corrupt?
does it start while the wallet.dat is in there? or does it give you an error?

It's on start tell that it corrupt and cannot salvage it. After restart with new wallet.dat file my current wallet.dat changed to wallet.12467874.bak and its same situation with all copies of my address on few OS. Command from prompt "Salvagewallet" and rescan not take any positive effect.

aquitasIJ

member

Activity: 112

Merit: 10

Quote from: aquitasIJ on April 16, 2015, 07:27:43 PM

Quote from: MinerFTW on April 16, 2015, 07:25:37 PM

i will run the node on my server for you. hit me up the stuff and i will turn it online if that fix this mess.

Alright
You will need to put the checkpointing private key in the .conf file.
like this
checkpointkey=pirvatekeygoeshere
and i will need to put the ip address of the node in the source and on the ANN

Can the checkpointing demon run on multi node? If yes, give me one demon for Windows, I have 24/7 sever.

it can only run on 1 node

luongdk

full member

Activity: 686

Merit: 102

Quote from: aquitasIJ on April 16, 2015, 07:27:43 PM

Quote from: MinerFTW on April 16, 2015, 07:25:37 PM

i will run the node on my server for you. hit me up the stuff and i will turn it online if that fix this mess.

Alright
You will need to put the checkpointing private key in the .conf file.
like this
checkpointkey=pirvatekeygoeshere
and i will need to put the ip address of the node in the source and on the ANN

Can the checkpointing demon run on multi node? If yes, give me one demon for Windows, I have 24/7 sever.

aquitasIJ

member

Activity: 112

Merit: 10