Topic: i quit - page 92. (Read 142560 times)

Guys but is it really necessary to update wallet from v1.0.0.0 to v1.0.0.1 ?
Previous version works well

where is 5 satoshi or 10 satoshi buy suport?? or maybe just a crap??

Final Solution: Litedoge-Qt on diff pc, dump priv keys on master pc, import on other pc, delete old temp, create new roaming by launching fresh, transfer from other pc to master pc's fresh wallet, all is good now.  No other method worked for my corrupted wallet data, and I am also about 5 million Ldoge short of what I was shown to have from staking prior this drama... sweet.

Yes I am very familiar with how dumping and importing private keys is done however that returned an error, I will figure this out or I will PM DogePentagon, thank you.
[/quote]

Sounds to me like your wallet .dat is badly corrupted... Best of luck

d57heinz

I found this on another thread.. try this out..

"Now, make sure you back up the old wallet before doing any of this.

 1/ Reload the client

 2/ Go into the console and type "dumpprivkey yourlitedogeaddress" where litedogeaddress is the address that supposedly holds any coins.

 3/ Repeat 2 for every litedoge address that is supposed to contain your coins.

 Store these keys somewhere safe. If you lose the keys you will lose your coins forever.

 When you have stored these keys, rename your wallet.dat to wallet.old, make sure you do NOT delete it. The inventor of Bitcoin himself advised that you should NEVER delete a wallet.

 Reload the client. Your balance will be zero since Litedoge-QT will create a new wallet.dat that it will then work with.

 You can then rebuild the wallet by going into the console and typing "importprivkey 5YourPrivateKey" where 5YourPrivateKey is the private key that I mentioned above, in the case of more than 1 private key, repeat the same command until all the keys are imported into the wallet.


 If your old wallet is badly corrupted, you may need to ask someone more knowledgeable than me, if the above steps do not work for you"

Best regards
d57heinz
[/quote]


Yes I am very familiar with how dumping and importing private keys is done however that returned an error, I will figure this out or I will PM DogePentagon, thank you.

I think we all did this but maybe the repair or check wallet commands will help me, I will let you know, I will also try a 3rd time to delete everything in roaming I am very experienced in altcoin and wallet issues this one is just so damn repetitive and without an actual wallet update ppl are trying to basically trick the 1.0.0.1 version into working for them.  Needless to say a few million of my coins are not in my wallet even though they should be, nearly 5 million doge is actually missing from all this mishaps and me finding blocks incorrectly.
[/quote]

I found this on another thread.. try this out..

"Now, make sure you back up the old wallet before doing any of this.

 1/ Reload the client

 2/ Go into the console and type "dumpprivkey yourlitedogeaddress" where litedogeaddress is the address that supposedly holds any coins.

 3/ Repeat 2 for every litedoge address that is supposed to contain your coins.

 Store these keys somewhere safe. If you lose the keys you will lose your coins forever.

 When you have stored these keys, rename your wallet.dat to wallet.old, make sure you do NOT delete it. The inventor of Bitcoin himself advised that you should NEVER delete a wallet.

 Reload the client. Your balance will be zero since Litedoge-QT will create a new wallet.dat that it will then work with.

 You can then rebuild the wallet by going into the console and typing "importprivkey 5YourPrivateKey" where 5YourPrivateKey is the private key that I mentioned above, in the case of more than 1 private key, repeat the same command until all the keys are imported into the wallet.


 If your old wallet is badly corrupted, you may need to ask someone more knowledgeable than me, if the above steps do not work for you"

Best regards
d57heinz

I think we all did this but maybe the repair or check wallet commands will help me, I will let you know, I will also try a 3rd time to delete everything in roaming I am very experienced in altcoin and wallet issues this one is just so damn repetitive and without an actual wallet update ppl are trying to basically trick the 1.0.0.1 version into working for them.  Needless to say a few million of my coins are not in my wallet even though they should be, nearly 5 million doge is actually missing from all this mishaps and me finding blocks incorrectly.

https://i.imgur.com/UY6iMMs.png

The most important thing you need to know is that you must not delete your wallet.dat file!
As long as you backup your current wallet.dat file, you will be safe.

Here’s how to sync and repair your LiteDoge wallet:

Step 1:
Backup your wallet.dat file
Copy your wallet.dat to a new location!
Failure to do this will result in A LOSS OF ALL COINS

Wallet locations:


   C:\Users\ %username% \AppData\Roaming\LiteDoge\wallet.dat


Step 2:
Download the LiteDoge wallet from first page
First page: https://bitcointalksearch.org/topic/i-quit-985182
Source: https://mega.co.nz/#!2VMTHT5T!BaU_KBPiJX0cyDq6xe6vFGi-B7C_0Sm9-VvluFCwEAQ

Step 3:
Move the LiteDoge user data folder (rename to LiteDoge.old)

Step 4:
Install the new client

Step 4a:
Start the LiteDoge program briefly to create the LiteDoge data folder (otherwise theres nowhere to put the backed up wallet.dat).

Step 4b:
Close the LiteDoge QT (the wallet)

Step 5:
Replace the new wallet.dat with your backed up version

Step 6:
Run the wallet and wait the blockchain to resync.
(Failed resync? => "LiteDoge.conf" with latest addnodes at C:\Users\ %username% \AppData\Roaming\LiteDoge\ or just copy "LiteDoge.conf" from your "Step 3" renamed folder "LiteDoge.old" )

Step 7:
Run a repair on your wallet.
In the debug window under Help type “repairwallet” or “checkwallet”
(LiteDoge Wallet> Help> Debug window> Console)

Step 8:
Enjoy : )

Wallet

Sometimes I get error number -30xxx and it says cannot open database, but that is when it crashes while staking, if I try to send a transaction while not staking I get the following error..

EXCEPTION: St13runtime_error
CWallet:;GenerateNewKey() : AddKey failed
C:\Users\Owner\Desktop\Litedoge-qt.exe in Runaway exception

Sent ya a little  just got back to pc:)  Happy staking!!

Best regards
d57heinz

Looks cool killer logo my girl fell in love with it. I doubt this coin is dead its gaining attention quick and its not like the price can really even go down lol with that said... BUY, HOLD, STAKE!!!

Nah just trying to send 500k to bittrex to test the network make sure it's correct... so that shouldnt be an issue.  It just crashes when I hit send after putting in my passphrase.

How large a transaction? Some coins have size limits...   10's of millions may qualify...

After Fixing my Sync issue I was able to recover my tens of millions of Ldoge... now when I try to send a transaction the wallet closes and returns and error, any suggestions?

Thanks for the information definitely appreciated.

dEMcCDjXPjg69dUsx7WmYWmw9X8mxw6WGK

Nice

It also may be possible to run multiple instances of a wallet using the datadir=wallet directory in your conf file..   I haven't done this myself  but im sure its possible to run many wallets of the same coin on one computer..


Edit  after thinking about this a bit longer.. I think you would have to pass a flag to the wallet start where to find the conf file.. idk  as the wallet will default to the main conf and if you try to run two it will both use same data directory which will not work.. let me do some more digging and il get back to you


Edit  got some good help in irc.. you would have to start your wallet with the litedoged --datadir=walletdirectory   then once that is started  goto second wallet instance and start with litedoged --datadir=2ndwalletdirectory  you may also need to rename the 2nd litedoged start file for the second instance  not too sure

Best Regards
d57heinz

first backup the wallet your needing to recover.. Then goto the appdata directory and just copy the one you want to that folder and tehn make sure its named wallet.dat and it will automatically find it on wallet start..  I hope that gets ya going
Once you get it rolling post your address ill send ya some to get ya started staking.. just remember its doesn't start staking till 8 hours after I send to you. then depending on amount staking you will get your "expected" time to stake.. and I say that loosely as you can get lucky and find one right away or it could be double the time..

Edit:  this wallet doesn't allow for multiple wallets such as multibit for btc.. If you want multiple wallets you will have to have them running on multiple machines as the wallet doesn't allow you to rename or open a new one..  basically your only option at this time would be keeping track of certain wallet.dat by a folder.. just name the folder the same as your wallet address then whne you need to open that wallet you can just copy the one your using in appdata to the corresponding folder named after the wallet addy  then copy the other folder wallet.dat to appdata.. its a round about way of getting it done.. but that is all i can come up with atm

Best Regards
d57heinz

Ok thanks but the issue seems to be that I cant rename wallets. Never had that issue before. If you rename your main wallet it will replace it with a new one named wallet.dat when you try to recover it.