I successfully build my first rig | Bitcointalksearch.org

deskless

jr. member

Activity: 279

Merit: 1

Quote from: swogerino on September 19, 2022, 03:29:50 PM

Quote from: DevFile90 on September 19, 2022, 12:33:31 PM

I'm wondering what would happen to all crypto miners right now, how are you guys coping with the situation.

I have shut down my rigs but I am not going to sell the equipment and liquidate everything.It also look like a bad timing for Nvidia which will most likely present tomorrow the 4000 series,at least this is what I assume because they have said in their instagram official page that the unbounded is coming,I believe this to be the 4000 series.

As for the rig it is not worthy even if someone has free electricity with those Rx 580 cards will do like 0.50 dollars daily in mining ETC which many people are mining now,the same return with many other coins so we should be in study mode now,looking what is going on around and why not grab a few additional cards for really cheap,as prices have fallen down dramatically since after the merge.

I unassembled one rig that I built in 2018. It was hosting 10 580s. It was a sad moment but feels like it is time to move on.

Z390

sr. member

Activity: 812

Merit: 315

DGbet.fun - Crypto Sportsbook

Quote from: grendel25 on September 19, 2022, 08:04:47 PM

Epic Cash miners are profitable and happy.

Where is the proof? Do Epic Cash has any mining calculator presently? The last time I checked this project out it lacks trading volume, you can drop link if you have any, no calculator shows that Epic cash is near profitable, only Aeternity and ETC are topping the chart now.

Z390

sr. member

Activity: 812

Merit: 315

DGbet.fun - Crypto Sportsbook

Quote from: swogerino on September 19, 2022, 03:29:50 PM

Quote from: DevFile90 on September 19, 2022, 12:33:31 PM

I'm wondering what would happen to all crypto miners right now, how are you guys coping with the situation.

I have shut down my rigs but I am not going to sell the equipment and liquidate everything.It also look like a bad timing for Nvidia which will most likely present tomorrow the 4000 series,at least this is what I assume because they have said in their instagram official page that the unbounded is coming,I believe this to be the 4000 series.

As for the rig it is not worthy even if someone has free electricity with those Rx 580 cards will do like 0.50 dollars daily in mining ETC which many people are mining now,the same return with many other coins so we should be in study mode now,looking what is going on around and why not grab a few additional cards for really cheap,as prices have fallen down dramatically since after the merge.

Miners will get tired at some point, today the ETH PoW hashrate on poolin have started dropping, those who cant withstand this temporal pain will have to sell their rigs and quiet everything, I like your idea of not selling your rig.

grendel25

legendary

Activity: 2296

Merit: 1031

Epic Cash miners are profitable and happy.

swogerino

legendary

Activity: 3318

Merit: 1247

Bitcoin Casino Est. 2013

Quote from: DevFile90 on September 19, 2022, 12:33:31 PM

I'm wondering what would happen to all crypto miners right now, how are you guys coping with the situation.

I have shut down my rigs but I am not going to sell the equipment and liquidate everything.It also look like a bad timing for Nvidia which will most likely present tomorrow the 4000 series,at least this is what I assume because they have said in their instagram official page that the unbounded is coming,I believe this to be the 4000 series.

As for the rig it is not worthy even if someone has free electricity with those Rx 580 cards will do like 0.50 dollars daily in mining ETC which many people are mining now,the same return with many other coins so we should be in study mode now,looking what is going on around and why not grab a few additional cards for really cheap,as prices have fallen down dramatically since after the merge.

Pendrak

member

Activity: 208

Merit: 46

Quote from: DevFile90 on September 19, 2022, 12:33:31 PM

I'm wondering what would happen to all crypto miners right now, how are you guys coping with the situation.

Most miners are in denial mode.

DevFile90

member

Activity: 227

Merit: 12

I'm wondering what would happen to all crypto miners right now, how are you guys coping with the situation.

S3300

member

Activity: 280

Merit: 10

Quote from: Trx3 on August 31, 2022, 10:39:46 AM

I bought some rx580 graphic cards from China for 120$ each and I successfully build my first rig, thanks to YouTube video it's not that hard like I've imagined, after placing the order my mind is plagued with thoughts of messing things up

The only issue I am having now is the hashrate number, I am getting 27MH from the graphic cards each and a friend rx580 rig is getting 31MH, any ideas of what I can do next? I am running HiveOS.

Nice build, I don't think I will ever spend money on Radeon RX580s again but with free electricity this graphic card isn't that bad at all, we still don't know what will happen after Eth merge so I think building rigs right now is very risky but if things go well then it's all for the best, happy mining.

swogerino

legendary

Activity: 3318

Merit: 1247

Bitcoin Casino Est. 2013

Quote from: Bitbtc8 on September 04, 2022, 01:28:17 AM

Direct mining motherboards with no risers are the best, they are very close to how you will plug a Asic miner and never look back, I only do updates on hive OS with riserless motherboard, no reboots or downtime.

I love that Asrock H510 Pro BTC that I got some months ago,I have put 4 cards directly in it because the other cards I have in another rig and it runs perfectly,cards running cool even in an open air rig like the one I have but when having 6 cards in here a closed case is the best option or as a minimum you should have additional cooling for the cards which is the cheaper option.I strongly agree with riserless motherboards being really stable and without problems,at least I didn't encounter any so far and I am not even running Linux but Windows 10.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: Bitbtc8 on September 04, 2022, 01:28:17 AM

Direct mining motherboards with no risers are the best, they are very close to how you will plug a Asic miner and never look back, I only do updates on hive OS with riserless motherboard, no reboots or downtime.

yeah my 14 cases from minerdude are close to perfect up time.

this is very important to me as the trip is 140 miles or 200 kilometers round trip.

I use smos and have had really good success with them.

I use a riser here and there in my house on small rigs.

they are not as stable as the 12 12 cards slot rigs or the 2 8 slot rigs.

I do not rule out riser rigs but I don’t use them very much.

Still i can see use for a riser here or there but not for me and the close to 200 cards I have.

Bitbtc8

full member

Activity: 1148

Merit: 116

Direct mining motherboards with no risers are the best, they are very close to how you will plug a Asic miner and never look back, I only do updates on hive OS with riserless motherboard, no reboots or downtime.

rdluffy

legendary

Activity: 2450

Merit: 1472

Quote from: Pterosaur on September 03, 2022, 02:21:58 AM

I have too many failure with risers in a week, one gpu will become invisible in hiveOS after two days of mining none stop, I am getting tired of risers and I have make up my mind to upgrade to riserless motherboard.

I used to have problems with risers, but it was a long time ago, I think v1 risers
But I'm using good versions, they are reliable for me, more than 1 year without any single problem. No headaches, no off-line time
Sometimes you can get a bad batch and it's hard to return, because sellers are in China most of times.
This is the ones I'm using:

FP91G

legendary

Activity: 1834

Merit: 1136

Quote from: Pterosaur on September 03, 2022, 02:21:58 AM

Quote from: JayDDee on September 02, 2022, 12:37:38 PM

Quote from: Trx3 on September 02, 2022, 09:21:11 AM

What makes slotted motherboards better than those with riser ports only? I think it's not about the performance but the less tweaking headache that risers gives users compare to slotted motherboard, or there is more that I don't know? I will like to learn.

You're right it's not about performance, it's about convenience and personal preference. A riserless motherboard, by definition, doesn't use
risers so there are fewer potential points of failure. On the other hand the slot spacing is fixed so you can't adjust for different card widths.

PS. new motherboards seem to have traded in PCIe slots for more m.2, so m.2 to 4x PCIe/USB splitters are going to become popular for mining.
USB connector but PCIe protocol, of course.

I have too many failure with risers in a week, one gpu will become invisible in hiveOS after two days of mining none stop, I am getting tired of risers and I have make up my mind to upgrade to riserless motherboard.

Your problem is with the raiser supplier, not the raisers. The raiser is not such a complex detail that it has many problems. Raisers with regular motherboards are cheaper than dedicated mining motherboards without raisers. And for premium boards without raisers, expensive cases are needed.

Pterosaur

member

Activity: 207

Merit: 12

Syntrum.com

Quote from: JayDDee on September 02, 2022, 12:37:38 PM

Quote from: Trx3 on September 02, 2022, 09:21:11 AM

What makes slotted motherboards better than those with riser ports only? I think it's not about the performance but the less tweaking headache that risers gives users compare to slotted motherboard, or there is more that I don't know? I will like to learn.

You're right it's not about performance, it's about convenience and personal preference. A riserless motherboard, by definition, doesn't use
risers so there are fewer potential points of failure. On the other hand the slot spacing is fixed so you can't adjust for different card widths.

PS. new motherboards seem to have traded in PCIe slots for more m.2, so m.2 to 4x PCIe/USB splitters are going to become popular for mining.
USB connector but PCIe protocol, of course.

I have too many failure with risers in a week, one gpu will become invisible in hiveOS after two days of mining none stop, I am getting tired of risers and I have make up my mind to upgrade to riserless motherboard.

JayDDee

full member

Activity: 1424

Merit: 225

Quote from: Trx3 on September 02, 2022, 09:21:11 AM

What makes slotted motherboards better than those with riser ports only? I think it's not about the performance but the less tweaking headache that risers gives users compare to slotted motherboard, or there is more that I don't know? I will like to learn.

You're right it's not about performance, it's about convenience and personal preference. A riserless motherboard, by definition, doesn't use
risers so there are fewer potential points of failure. On the other hand the slot spacing is fixed so you can't adjust for different card widths.

PS. new motherboards seem to have traded in PCIe slots for more m.2, so m.2 to 4x PCIe/USB splitters are going to become popular for mining.
USB connector but PCIe protocol, of course.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: Trx3 on September 02, 2022, 09:21:11 AM

Quote from: philipma1957 on September 02, 2022, 08:25:40 AM

Yes op you are doing pretty good for a first build.
I am more of a fan of slotted boards not riser boards, but you made a very nice riser build.
Leave it alone and just stack your coins.
I do suggest that you should be ready to switch to etc or ethW come the merge.
The merge will be here soon maybe sept 12-14 and it will bring a lot of change if it does come.
Do not do a new build until after the merge and we learn exactly how it affects us miners.
In the meantime enjoy the build.

What makes slotted motherboards better than those with riser ports only? I think it's not about the performance but the less tweaking headache that risers gives users compare to slotted motherboard, or there is more that I don't know? I will like to learn.

I knew about the Merge before building this one but that's just one out of three that I planned to build so the rest will be after the merge, if profits get worsen I except graphic card price to fall more, am I right on this one? That's what I heard.

I have 14 rigs from minerdude

2 of these

https://minerdude.com/product/minerdude-x8ultra-plus/

2 of these

https://minerdude.com/product/minerdude-x12-xtreme-12-gpu-smart-mining-rig-200-277v-only/

10 of these

https://minerdude.com/product/x12012022/

they work well in my warehouse

they cool well

they are easy to clean

they also take up very little space

In my ware house mine they are a better choice than riser builds.

Trx3

newbie

Activity: 28

Merit: 22

Quote from: philipma1957 on September 02, 2022, 08:25:40 AM

Yes op you are doing pretty good for a first build.
I am more of a fan of slotted boards not riser boards, but you made a very nice riser build.
Leave it alone and just stack your coins.
I do suggest that you should be ready to switch to etc or ethW come the merge.
The merge will be here soon maybe sept 12-14 and it will bring a lot of change if it does come.
Do not do a new build until after the merge and we learn exactly how it affects us miners.
In the meantime enjoy the build.

What makes slotted motherboards better than those with riser ports only? I think it's not about the performance but the less tweaking headache that risers gives users compare to slotted motherboard, or there is more that I don't know? I will like to learn.

I knew about the Merge before building this one but that's just one out of three that I planned to build so the rest will be after the merge, if profits get worsen I except graphic card price to fall more, am I right on this one? That's what I heard.

5W-KILO

member

Activity: 234

Merit: 35

Moon.win

Nice build OP, unlike I that killed two graphic cards when I tried building my first ever mining rig, I messed up and spent double money to get extra graphic cards again, ruined a motherboard too, enjoy your mining rig.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Yes op you are doing pretty good for a first build.
I am more of a fan of slotted boards not riser boards, but you made a very nice riser build.
Leave it alone and just stack your coins.
I do suggest that you should be ready to switch to etc or ethW come the merge.
The merge will be here soon maybe sept 12-14 and it will bring a lot of change if it does come.
Do not do a new build until after the merge and we learn exactly how it affects us miners.
In the meantime enjoy the build.

FP91G

legendary

Activity: 1834

Merit: 1136

Quote from: Trx3 on September 02, 2022, 02:45:55 AM

Quote from: philipma1957 on September 01, 2022, 02:14:05 PM

Quote from: Trx3 on August 31, 2022, 10:39:46 AM

I bought some rx580 graphic cards from China for 120$ each and I successfully build my first rig, thanks to YouTube video it's not that hard like I've imagined, after placing the order my mind is plagued with thoughts of messing things up

The only issue I am having now is the hashrate number, I am getting 27MH from the graphic cards each and a friend rx580 rig is getting 31MH, any ideas of what I can do next? I am running HiveOS.

I like the rig it will cool well. How are the temps? Do you stay at a good number for the cards.

What is the psu?

Could you screen shot hiveOS so we can see readout.

Can you show the mobo and psu.

Lastly how are you cooling room 8 cards are close to 1200 watts the room must be pretty warm.

1) My Temp never exceed 60°C in a very hot weather, I placed the mining rig very close to my window and there are trees in my compound with cool breeze doing it's thing. I have also managed to get 29MH+ after few trials.

2) I am using a B250 motherboard and a Daylead 1600 watt PSU

The temp isn't bad at all as there is good breeze in my compound, it do seize here and there but it helps and I make sure the rig is set close to window, no problem so far.

Good settings and you're lucky with your memory. Memory can be increased to 2150-2200, but this may affect the stability of the work. If the mining farm is stable, then I would not change anything. Some miners increase the memory to 2250 and get almost 32 megahash, but this is probably just for showing off. There will be no stability with these settings.

Topic: I successfully build my first rig (Read 489 times)