Pages:
Author

Topic: I think I fucked up (Read 3532 times)

full member
Activity: 126
Merit: 100
October 19, 2012, 11:31:28 AM
#55
I made sure there was 0 power on board when I changed things (unplugged cable and waited a minute). And that capacitor is firmly attached to the psu cord. And it might be the psu, but I don't see how it could have shorted between me shutting down computer and unplugging it. (Remained unplugged entire time I was rue arranging wires)
full member
Activity: 126
Merit: 100
October 19, 2012, 06:26:05 AM
#54
I had a similar issue once upon a time.

Everything was working fine until I tied the cables back. Then wouldn't boot, just a quick spike of power, then nothing.

I checked all the connections, they seemed connected, I swapped the PSU out and the new PSU worked fine.

Gigabyte motherboards are pretty rock solid. My guess is that there is a lose wire somewhere in the PSU.

Budget $20-30 Chinese PSUs don't last long, get a decent one if you plan to mine bitcoins.

Also get a can of compressed air and blow that dust out of the CPU heatsink!
It might be like that inside the GPU and PSU too which would explain your overheating issue! Shocked
hero member
Activity: 568
Merit: 500
October 19, 2012, 04:37:45 AM
#53
I can't be from the psu, psu's don't have capacitors sticking outside the casing. I was asking coz that c. is in a rather strange position, stressed by the yellow cable's wrap.
If that is a red led burning, just above the blue "ultra" thingy, there is still power on the board (psu standby power?) I hope you did not change memory or vid.cards while this light was on, you might have had something shorted.
legendary
Activity: 3374
Merit: 4738
diamond-handed zealot
October 18, 2012, 10:08:30 PM
#52
BIZARRE  it seems to be across the 8pin 12V plug

new one on me
full member
Activity: 126
Merit: 100
October 18, 2012, 07:02:51 PM
#51
That capacitor on photo 3hn, just where the yellow wires come out of the black wrapping, is it still attached to the board? You did attach a power lead to the vid. card (assuming that it needs one)?

That capacitor seems to be connected to the PSU, no idea why
that one;

*snip*
yes that one
hero member
Activity: 568
Merit: 500
October 18, 2012, 06:48:04 PM
#50
That capacitor on photo 3hn, just where the yellow wires come out of the black wrapping, is it still attached to the board? You did attach a power lead to the vid. card (assuming that it needs one)?

That capacitor seems to be connected to the PSU, no idea why
that one;

full member
Activity: 126
Merit: 100
October 18, 2012, 06:30:23 PM
#49
That capacitor on photo 3hn, just where the yellow wires come out of the black wrapping, is it still attached to the board? You did attach a power lead to the vid. card (assuming that it needs one)?

That capacitor seems to be connected to the PSU, no idea why
hero member
Activity: 568
Merit: 500
October 18, 2012, 05:37:16 PM
#48
That capacitor on photo 3hn, just where the yellow wires come out of the black wrapping, is it still attached to the board? You did attach a power lead to the vid. card (assuming that it needs one)?
hero member
Activity: 658
Merit: 500
October 18, 2012, 05:00:20 PM
#47
unplug the PSU from wallpower and hold the power switch on the mobo for a few seconds.

then unplug the psu from the mobo and let it all sit for a few minutes then give it a try.
legendary
Activity: 3374
Merit: 4738
diamond-handed zealot
October 18, 2012, 12:34:04 PM
#46
yeah, sounds like a VREG failed on the MOBO

bummer man, hope you learned something though
legendary
Activity: 1002
Merit: 1000
Bitcoin
October 18, 2012, 12:20:12 AM
#45
ram is in the right slot ?  slot 0 or 1, does this ram work in pairs ?
full member
Activity: 126
Merit: 100
October 18, 2012, 12:18:10 AM
#44
RAM is fine, ill get a new mobo an see what happens.
legendary
Activity: 1002
Merit: 1000
Bitcoin
October 18, 2012, 12:15:19 AM
#43
Any POST?

If not unplug everything. Then try booting with only one stick of ram if you get a valid POST then add the other stick if any. Then plug one component at the time an try to boot.

Good luck.


Agree, seems like a RAM misplaced or defective !
full member
Activity: 126
Merit: 100
October 17, 2012, 11:31:04 PM
#42
I checked the PSU and it is fine
legendary
Activity: 3374
Merit: 4738
diamond-handed zealot
October 17, 2012, 11:19:52 PM
#41
your buddy, he paperclipped the PSU and it fired up OK?

(short pin 5 to ground)
legendary
Activity: 1946
Merit: 1006
Bitcoin / Crypto mining Hardware.
October 17, 2012, 10:20:53 PM
#40
Had similar problem fans moving just a tad, and a click from the PSU nothing else.
 Apparently It was my power supply Antec TP 650. A coil was shorting inside, apparently enamel had worn off where some glue on the coil has burned and was causing a short. Scraped off the carbonized glue and it started working again.
full member
Activity: 126
Merit: 100
October 17, 2012, 09:42:02 PM
#39
Dude, not to bust your chops, but why in the world would you even waste your time mining with an Nvidia GTX 465?  At most you're getting what, maybe 70 MH for 350-400 watts of power?  For about .7 BTC ($8.50) a month, even at good power costs of .10 kwh, you'd pay $25 in power costs.

So, you're losing $17 a month, not to mention risking killing your gear, which I think you've found out Wink

Regardless, try another PSU if you have one lying around to see if it's the PSU or mobo.
I bought the GPU way before I started mining, that was my gaming PC xD
full member
Activity: 126
Merit: 100
October 17, 2012, 09:41:12 PM
#38
Just had my friend come over who is a complete hardware junkie, I def need a new motherboard :/
Was gunna buy a new rig anyway, might as well be out of necessity I guess :p

Maybe once I get my bitcoin games site up, I can make enough BTCBTC to pay for it all xD
sr. member
Activity: 378
Merit: 250
October 17, 2012, 09:40:33 PM
#37
Dude, not to bust your chops, but why in the world would you even waste your time mining with an Nvidia GTX 465?  At most you're getting what, maybe 70 MH for 350-400 watts of power?  For about .7 BTC ($8.50) a month, even at good power costs of .10 kwh, you'd pay $25 in power costs.

So, you're losing $17 a month, not to mention risking killing your gear, which I think you've found out Wink

Regardless, try another PSU if you have one lying around to see if it's the PSU or mobo.
sr. member
Activity: 297
Merit: 250
October 17, 2012, 09:37:29 PM
#36
does your motherboard even have an onboard gpu?  My motherboard normally won't post without a GPU in there.

FWIW I had the same thing happen to me after a motherboard died.  Do you have anyone else's computer that you could test your PSU or GPU in?  I would short my PSU pins like superfastkyle suggested to rule out PSU issue.  Then it has to be the motherboard.  It's unlikely your ram would completely die.
Pages:
Jump to: