Topic: IBM 2880W PSU/Breakout Boards - *NEW* Package deals for T9/S9 & A7 - page 8. (Read 40908 times)
December 01, 2015, 04:54:40 PM
Right sorry, the PDU comes with an L6-50P plug: http://www.stayonline.com/detail.aspx?id=6272
December 01, 2015, 04:52:50 PM
What kind of plugs are on your PDU's?
4x C19 plugs, each with 15A breakers and a 50A main. I can source PDU's in other configurations including 3-phase if requested.
I figured the receptacles were C19 but I was wondering about the input plug for your single phase 50a pdu as there are a few types of 50a plugs.
TIA.
December 01, 2015, 04:26:43 PM
Do you have the 4000 watter ?
https://bitcointalksearch.org/topic/m.12401250
I am thinking of using this with 2 s-7's and an avalon 6 so we are talking
1200 + 1200 + 1000 = 3400 watts
or with an under clock
s-7 S-7 a-6 a-6
1150 + 1150 + 900 + 900 = 4000 watts.
https://bitcointalksearch.org/topic/m.12401250
I am thinking of using this with 2 s-7's and an avalon 6 so we are talking
1200 + 1200 + 1000 = 3400 watts
or with an under clock
s-7 S-7 a-6 a-6
1150 + 1150 + 900 + 900 = 4000 watts.
Not yet Phil, I should be receiving the PCB's to start assembling the boards by the end of this week I hope. I know there is a lot of interest in it, and I have quite a bit tied up in materials for it so I am as anxious as you to have them available.
What kind of plugs are on your PDU's?
4x C19 plugs, each with 15A breakers and a 50A main. I can source PDU's in other configurations including 3-phase if requested.
December 01, 2015, 04:10:29 PM
What kind of plugs are on your PDU's?
December 01, 2015, 10:59:03 AM
Do you have the 4000 watter ?
https://bitcointalksearch.org/topic/m.12401250
I am thinking of using this with 2 s-7's and an avalon 6 so we are talking
1200 + 1200 + 1000 = 3400 watts
or with an under clock
s-7 S-7 a-6 a-6
1150 + 1150 + 900 + 900 = 4000 watts.
https://bitcointalksearch.org/topic/m.12401250
I am thinking of using this with 2 s-7's and an avalon 6 so we are talking
1200 + 1200 + 1000 = 3400 watts
or with an under clock
s-7 S-7 a-6 a-6
1150 + 1150 + 900 + 900 = 4000 watts.
November 30, 2015, 07:19:10 PM
Back at ya!
November 30, 2015, 07:02:43 PM
sent a PM on the big daddy package 
November 30, 2015, 01:57:12 AM
Hello,
Is this package still available?
The "Double A (Antminer/Avalon)" Package - $190
Enough to power 2x Antminer S7's for as cheap as possible
- 1x 2880W PSU
- 1x Breakout board
- 20x 24" PCIe cables
- 1x C19 cable (specify C19-C20 or C19-NEMA 5-15P)
Would want C19-C20 cable and a C19-Nema 5-15P cable
Is this package still available?
The "Double A (Antminer/Avalon)" Package - $190
Enough to power 2x Antminer S7's for as cheap as possible
- 1x 2880W PSU
- 1x Breakout board
- 20x 24" PCIe cables
- 1x C19 cable (specify C19-C20 or C19-NEMA 5-15P)
Would want C19-C20 cable and a C19-Nema 5-15P cable
PM'd
November 29, 2015, 10:49:39 PM
Hello,
Is this package still available?
The "Double A (Antminer/Avalon)" Package - $190
Enough to power 2x Antminer S7's for as cheap as possible
- 1x 2880W PSU
- 1x Breakout board
- 20x 24" PCIe cables
- 1x C19 cable (specify C19-C20 or C19-NEMA 5-15P)
Would want C19-C20 cable and a C19-Nema 5-15P cable
Is this package still available?
The "Double A (Antminer/Avalon)" Package - $190
Enough to power 2x Antminer S7's for as cheap as possible
- 1x 2880W PSU
- 1x Breakout board
- 20x 24" PCIe cables
- 1x C19 cable (specify C19-C20 or C19-NEMA 5-15P)
Would want C19-C20 cable and a C19-Nema 5-15P cable
November 29, 2015, 10:33:49 AM
The "Double A (Antminer/Avalon)" Package - $190
Enough to power 2x Antminer S7's for as cheap as possible
- 1x 2880W PSU
- 1x Breakout board
- 20x 24" PCIe cables
- 1x C19 cable (specify C19-C20 or C19-NEMA 5-15P)
Enough to power 2x Antminer S7's for as cheap as possible
- 1x 2880W PSU
- 1x Breakout board
- 20x 24" PCIe cables
- 1x C19 cable (specify C19-C20 or C19-NEMA 5-15P)
PMed you
Thanks Finksy
November 28, 2015, 10:47:44 AM
Have packages to ship from stock. I added another package specifically for 2x Antminer S7's called the Double A, due to demand for this specific package. I think it provides quite a lot of value compared to all other alternatives on the market, including the Bitmain PSU's.
November 23, 2015, 05:08:23 PM
I am potentially sitting on a large order of PSU's that will take up availability for the coming couple weeks or more. All orders that have been placed thus far are fine, but future orders could have a significant delay for PSU's.
November 22, 2015, 11:53:55 PM
PM replied. Everything currently in stock and shipping typically within 48 hours. No firm ETA on the IBM 4K boards, I expect to have them for sale within 2 weeks.
November 22, 2015, 03:55:59 AM
I'm interested in either x1 Bladecenter H 2880w breakout board, or the DPS-2000BB for the 4000w setup. I would like to purchase 10 cables initially to power an S7. I also sent a PM as well.
Thanks!
Thanks!
November 20, 2015, 10:02:01 PM
PCB's are currently being manufactured, I expect to see them in about 10 days or so. Side plates are being protoyped right now with a forum member, we are just trying to figure out the best material for price, weight, and durability.
November 20, 2015, 09:51:54 PM
Curious if you ever got the 4000w package and what the cost would be for the PSU, breakout board, side plate and fans would be if you have them. The noise of the 2880w are starting to get to me.
November 13, 2015, 04:07:46 PM
Daplayer, no problem!
record364, te he enviado un PM.
record364, te he enviado un PM.
November 13, 2015, 12:34:42 PM
Exactly,
That is what I was missing.
I totally get what you are saying...
Thanks For your Time.
DaPlayer.
That is what I was missing.
I totally get what you are saying...
Thanks For your Time.
DaPlayer.
November 12, 2015, 10:48:23 AM
Hello,
The Power supply, If I am reading correctly is US 220 Volts.
The C19 and C20 Cables don't look like the US 220 Outlet.
I understand the end that goes to the Power supply, the outlet end.
What am I missing?
?
Thanks
The Power supply, If I am reading correctly is US 220 Volts.
The C19 and C20 Cables don't look like the US 220 Outlet.
I understand the end that goes to the Power supply, the outlet end.
What am I missing?
?Thanks
Daplayer,
The C19 end of the cable is required to feed AC voltage into the PSU via the breakout board. I supply C19-C20 cables with some of the packages because it is the most commonly available cable, and ideally you would power these PSU's through a PDU, which has C19 outlets and it is a plug & play affair (just like the "Pimp DaddY" package). What many people including myself will do for powering a single PSU is cut off the C20 end of the cable, and wire on a NEMA 6-20P and corresponding receptacle. These parts are commonly available at any hardware store, and are safely suited for the maximum draw of this PSU (I've tested upwards of 13.5A draw).
As usual, you should consult a certified electrician for your isntallation.
November 11, 2015, 04:34:55 PM
Hello,
The Power supply, If I am reading correctly is US 220 Volts.
The C19 and C20 Cables don't look like the US 220 Outlet.
I understand the end that goes to the Power supply, the outlet end.
What am I missing??
Thanks
The Power supply, If I am reading correctly is US 220 Volts.
The C19 and C20 Cables don't look like the US 220 Outlet.
I understand the end that goes to the Power supply, the outlet end.
What am I missing?
?Thanks
Jump to: