Didn't have improvement,
can anyone share .bin files for r9 280X and 270?
Topic: Improved Whirlcoin AMD Miner (Read 5549 times)
Uray,
is there a reason why the /submodules/jansson/ folder is empty when I unzip your source file sgminer-master.zip from github?
Now I could compile it doing this ...
I guess there is only more thing. Thanks for every hint
You need to download jansson, this one doesn't seem to be directly included in the release then extract to the submodules/jansson directory and run again... it should work perfectlyis there a reason why the /submodules/jansson/ folder is empty when I unzip your source file sgminer-master.zip from github?
Now I could compile it doing this ...
Code:
download sgminer ZIP from https://github.com/uraymeiviar/sgminer
download janson ZIP from https://github.com/akheron/jansson
copy AMD ADL_SDK 6.0 files to sgminer/ADL_SDK
copy files from jansson-master/ to /home/user/sgminer-whirl2/submodules/jansson/
cd sgminer-whirl2
autoreconf -i
CFLAGS="-O2 -march=native" ./configure --enable-opencl
make
download janson ZIP from https://github.com/akheron/jansson
copy AMD ADL_SDK 6.0 files to sgminer/ADL_SDK
copy files from jansson-master/ to /home/user/sgminer-whirl2/submodules/jansson/
cd sgminer-whirl2
autoreconf -i
CFLAGS="-O2 -march=native" ./configure --enable-opencl
make
I guess there is only more thing. Thanks for every hint
I already did that in the second and fourth line. That's why it was compiling without error. But if I run uray's Linux x64 binary or my compiled one, I get this "Error -46: Creating Kernel from program. (clCreateKernel)" error. Do you suggest another download source for the janson ZIP?
Uray,
is there a reason why the /submodules/jansson/ folder is empty when I unzip your source file sgminer-master.zip from github?
Now I could compile it doing this ...
... but I get the same error when I run ./sgminer ...
... as well as with the Linux x64 binary from uray mentioned here:
https://bitcointalksearch.org/topic/m.8051769
I guess there is only more thing. Thanks for every hint
You need to download jansson, this one doesn't seem to be directly included in the release then extract to the submodules/jansson directory and run again... it should work perfectly is there a reason why the /submodules/jansson/ folder is empty when I unzip your source file sgminer-master.zip from github?
Now I could compile it doing this ...
Code:
download sgminer ZIP from https://github.com/uraymeiviar/sgminer
download janson ZIP from https://github.com/akheron/jansson
copy AMD ADL_SDK 6.0 files to sgminer/ADL_SDK
copy files from jansson-master/ to /home/user/sgminer-whirl2/submodules/jansson/
cd sgminer-whirl2
autoreconf -i
CFLAGS="-O2 -march=native" ./configure --enable-opencl
make
download janson ZIP from https://github.com/akheron/jansson
copy AMD ADL_SDK 6.0 files to sgminer/ADL_SDK
copy files from jansson-master/ to /home/user/sgminer-whirl2/submodules/jansson/
cd sgminer-whirl2
autoreconf -i
CFLAGS="-O2 -march=native" ./configure --enable-opencl
make
... but I get the same error when I run ./sgminer ...
Code:
[19:45:22] Started sgminer 4.2.2
[19:45:22] * using Jansson 2.6
[19:45:23] whirl.suprnova.cc difficulty changed to 0.004
[19:45:23] Startup GPU initialization... Using settings from pool whirl.suprnova
.cc.
[19:45:23] Startup Pool No = 0
[19:45:23] Initialising kernel whirlcoin.cl with bitalign, unpatched BFI, nfacto
r 10, n 1024
[19:45:23] Error -46: Creating Kernel from program. (clCreateKernel)
[19:45:23] Failed to init GPU thread 0, disabling device 0
[19:45:23] Restarting the GPU from the menu will not fix this.
[19:45:23] Re-check your configuration and try restarting.
Press enter to continue:
[19:45:22] * using Jansson 2.6
[19:45:23] whirl.suprnova.cc difficulty changed to 0.004
[19:45:23] Startup GPU initialization... Using settings from pool whirl.suprnova
.cc.
[19:45:23] Startup Pool No = 0
[19:45:23] Initialising kernel whirlcoin.cl with bitalign, unpatched BFI, nfacto
r 10, n 1024
[19:45:23] Error -46: Creating Kernel from program. (clCreateKernel)
[19:45:23] Failed to init GPU thread 0, disabling device 0
[19:45:23] Restarting the GPU from the menu will not fix this.
[19:45:23] Re-check your configuration and try restarting.
Press enter to continue:
... as well as with the Linux x64 binary from uray mentioned here:
https://bitcointalksearch.org/topic/m.8051769
I guess there is only more thing. Thanks for every hint
Uray,
is there a reason why the /submodules/jansson/ folder is empty when I unzip your source file sgminer-master.zip from github?
Now I could compile it doing this ...
... but I get the same error when I run ./sgminer ...
... as well as with the Linux x64 binary from uray mentioned here:
https://bitcointalksearch.org/topic/m.8051769
I guess there is only more thing. Thanks for every hint
is there a reason why the /submodules/jansson/ folder is empty when I unzip your source file sgminer-master.zip from github?
Now I could compile it doing this ...
Code:
download sgminer ZIP from https://github.com/uraymeiviar/sgminer
download janson ZIP from https://github.com/akheron/jansson
copy AMD ADL_SDK 6.0 files to sgminer/ADL_SDK
copy files from jansson-master/ to /home/user/sgminer-whirl2/submodules/jansson/
cd sgminer-whirl2
autoreconf -i
CFLAGS="-O2 -march=native" ./configure --enable-opencl
make
download janson ZIP from https://github.com/akheron/jansson
copy AMD ADL_SDK 6.0 files to sgminer/ADL_SDK
copy files from jansson-master/ to /home/user/sgminer-whirl2/submodules/jansson/
cd sgminer-whirl2
autoreconf -i
CFLAGS="-O2 -march=native" ./configure --enable-opencl
make
... but I get the same error when I run ./sgminer ...
Code:
[19:45:22] Started sgminer 4.2.2
[19:45:22] * using Jansson 2.6
[19:45:23] whirl.suprnova.cc difficulty changed to 0.004
[19:45:23] Startup GPU initialization... Using settings from pool whirl.suprnova
.cc.
[19:45:23] Startup Pool No = 0
[19:45:23] Initialising kernel whirlcoin.cl with bitalign, unpatched BFI, nfacto
r 10, n 1024
[19:45:23] Error -46: Creating Kernel from program. (clCreateKernel)
[19:45:23] Failed to init GPU thread 0, disabling device 0
[19:45:23] Restarting the GPU from the menu will not fix this.
[19:45:23] Re-check your configuration and try restarting.
Press enter to continue:
[19:45:22] * using Jansson 2.6
[19:45:23] whirl.suprnova.cc difficulty changed to 0.004
[19:45:23] Startup GPU initialization... Using settings from pool whirl.suprnova
.cc.
[19:45:23] Startup Pool No = 0
[19:45:23] Initialising kernel whirlcoin.cl with bitalign, unpatched BFI, nfacto
r 10, n 1024
[19:45:23] Error -46: Creating Kernel from program. (clCreateKernel)
[19:45:23] Failed to init GPU thread 0, disabling device 0
[19:45:23] Restarting the GPU from the menu will not fix this.
[19:45:23] Re-check your configuration and try restarting.
Press enter to continue:
... as well as with the Linux x64 binary from uray mentioned here:
https://bitcointalksearch.org/topic/m.8051769
I guess there is only more thing. Thanks for every hint
after compiling and scanned it to virustotal it detects 3...
can u tell me what is going on? I\'m not a coder, i don't how to read codes...
http://s1.postimg.org/u5qb6gx67/image.png
https://www.virustotal.com/en/file/3da2dbc55f3c509a04c547817354e4ac5411f75fb1c6da20869884adb7012af3/analysis/
can u tell me what is going on? I\'m not a coder, i don't how to read codes...
http://s1.postimg.org/u5qb6gx67/image.png
https://www.virustotal.com/en/file/3da2dbc55f3c509a04c547817354e4ac5411f75fb1c6da20869884adb7012af3/analysis/
LOL.... that happens with all miners like here is a version of nvminer:
https://www.virustotal.com/en/file/4fa034d26b911a0cb75a5874145c0b65e64aae8ea77fd22f65b4feb48a92b71c/analysis/1406508293/
Or if you want some real fun, here is a version of SGMINER 5.0 with 19/54 on it lol....
https://www.virustotal.com/en/file/85df52f1573a91cdc11aad60d22ecd91dc129a6366006a2d4b5d96bef715dba3/analysis/
Really, if your not sure, its best to open such files in sandbox or on a rig that you dont have to worry about ( wallets and all that stuff ).
after compiling and scanned it to virustotal it detects 3...
can u tell me what is going on? I\'m not a coder, i don't how to read codes...
https://www.virustotal.com/en/file/3da2dbc55f3c509a04c547817354e4ac5411f75fb1c6da20869884adb7012af3/analysis/
can u tell me what is going on? I\'m not a coder, i don't how to read codes...
https://www.virustotal.com/en/file/3da2dbc55f3c509a04c547817354e4ac5411f75fb1c6da20869884adb7012af3/analysis/
LOL.... that happens with all miners like here is a version of nvminer:
https://www.virustotal.com/en/file/4fa034d26b911a0cb75a5874145c0b65e64aae8ea77fd22f65b4feb48a92b71c/analysis/1406508293/
Or if you want some real fun, here is a version of SGMINER 5.0 with 19/54 on it lol....
https://www.virustotal.com/en/file/85df52f1573a91cdc11aad60d22ecd91dc129a6366006a2d4b5d96bef715dba3/analysis/
Really, if your not sure, its best to open such files in sandbox or on a rig that you dont have to worry about ( wallets and all that stuff ).
after compiling and scanned it to virustotal it detects 3...
can u tell me what is going on? I\'m not a coder, i don't how to read codes...
http://s1.postimg.org/u5qb6gx67/image.png
https://www.virustotal.com/en/file/3da2dbc55f3c509a04c547817354e4ac5411f75fb1c6da20869884adb7012af3/analysis/
can u tell me what is going on? I\'m not a coder, i don't how to read codes...
http://s1.postimg.org/u5qb6gx67/image.png
https://www.virustotal.com/en/file/3da2dbc55f3c509a04c547817354e4ac5411f75fb1c6da20869884adb7012af3/analysis/
Does someone know how to solve this error with the Linux x64 binary from uray?
This is my startup file:
Code:
Started sgminer 4.2.2-289-g943a0-dirty
[18:31:44] * using Jansson 2.6
[18:31:45] Startup GPU initialization... Using settings from pool whirl.suprnova
.cc.
[18:31:45] Startup Pool No = 0
[18:31:45] Building binary whirlcoinHawaiigw128l8.bin
[18:31:48] Initialising kernel whirlcoin.cl with bitalign, unpatched BFI, nfacto
r 10, n 1024
[18:31:48] Error -46: Creating Kernel from program. (clCreateKernel)
[18:31:48] Failed to init GPU thread 0, disabling device 0
[18:31:48] Restarting the GPU from the menu will not fix this.
[18:31:48] Re-check your configuration and try restarting.
Press enter to continue:
[18:31:44] * using Jansson 2.6
[18:31:45] Startup GPU initialization... Using settings from pool whirl.suprnova
.cc.
[18:31:45] Startup Pool No = 0
[18:31:45] Building binary whirlcoinHawaiigw128l8.bin
[18:31:48] Initialising kernel whirlcoin.cl with bitalign, unpatched BFI, nfacto
r 10, n 1024
[18:31:48] Error -46: Creating Kernel from program. (clCreateKernel)
[18:31:48] Failed to init GPU thread 0, disabling device 0
[18:31:48] Restarting the GPU from the menu will not fix this.
[18:31:48] Re-check your configuration and try restarting.
Press enter to continue:
This is my startup file:
Code:
#!/bin/sh
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
cd /home/xxxx/sgminer-whirl
./sgminer --kernel=whirlcoin -o stratum+tcp://whirl.suprnova.cc:7000 -u XXXX -p XXX --gpu-powertune 20 --gpu-fan 86 --thread-concurrency 8192 -g 2 -w 128 -I 20
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
cd /home/xxxx/sgminer-whirl
./sgminer --kernel=whirlcoin -o stratum+tcp://whirl.suprnova.cc:7000 -u XXXX -p XXX --gpu-powertune 20 --gpu-fan 86 --thread-concurrency 8192 -g 2 -w 128 -I 20
Can you post a windows build?
here is the windows build for this miner....https://mega.co.nz/#!ApYnwIQL!Adf6nU4qdR8w2sUzKO4lAJ1zmWJ5hYTha5k3bqq5rU0
Louiedave, which brand your 280x are , and what their gpu default engine exactly is?
Sapphire R9 280x DualX... 1020/1500 default
Does someone know how to compile it and getting beyond the jansson error?
Code:
make[4]: Leaving directory `/home/user/sgminer-whirl2/lib'
make[3]: Leaving directory `/home/user/sgminer-whirl2/lib'
make[2]: Leaving directory `/home/user/sgminer-whirl2/lib'
Making all in submodules
make[2]: Entering directory `/home/user/sgminer-whirl2/submodules'
Making all in jansson
make[3]: Entering directory `/home/user/sgminer-whirl2/submodules/jansson'
make[3]: *** No rule to make target `all'. Stop.
make[3]: Leaving directory `/home/user/sgminer-whirl2/submodules/jansson'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/user/sgminer-whirl2/submodules'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/user/sgminer-whirl2'
make: *** [all] Error 2
make[3]: Leaving directory `/home/user/sgminer-whirl2/lib'
make[2]: Leaving directory `/home/user/sgminer-whirl2/lib'
Making all in submodules
make[2]: Entering directory `/home/user/sgminer-whirl2/submodules'
Making all in jansson
make[3]: Entering directory `/home/user/sgminer-whirl2/submodules/jansson'
make[3]: *** No rule to make target `all'. Stop.
make[3]: Leaving directory `/home/user/sgminer-whirl2/submodules/jansson'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/user/sgminer-whirl2/submodules'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/user/sgminer-whirl2'
make: *** [all] Error 2
Code:
sudo apt-get install jansson
sudo apt-get install libjansson libjansson-dev
Doesn't work. sudo apt-get install libjansson libjansson-dev
I've found a windows binary here: http://cryptomining-blog.com/wp-content/files/sgminer-5-0-beta-whirlpool-windows.zip
Works just fine for me, getting about 10 MHS with my 280X.
Works just fine for me, getting about 10 MHS with my 280X.
Just a "heads up" guys..
The link has 2 flags and the file is showing 4 with "TrendMicro-HouseCall Suspici.802C6BD9" being the main concern.
https://www.virustotal.com/en/url/4a802685705823abf5455729446ff70889efe7d90b767c75fd8b1005cd64238e/analysis/1406383604/
https://www.virustotal.com/en/file/4e559660225eb6581529a01839ad26f706b35a785a84786a7551469851040ba4/analysis/1406383611/
Linux x64 binary : https://mega.co.nz/#!sopxDDRJ!gcQ-G8gCfC4fjWFrO77ImUtbwGgPiMZDSyvdc-s52vU
Thanks for uploading a Linux x64 binary!
But I get this error.
Code:
./sgminer: error while loading shared libraries: libssl.so.1: cannot open shared object file: No such file or directory
libssl1.0.0 and libssl-dev are installed.
you need openssl library on ur linux distro, try yum install openssl openssl-devel, or apt get, or anything
I will try that as soon as possible! THX
The Ubuntu command was ... sudo apt-get install openssl openssl-blacklist
... but I already had openssl and openssl-blacklist didn't solve the problem.
Edit (27.07.2014):
I've copied libssl.so.1.0.0 to libssl.so.1 and libcrypto.so.1.0.0 to libcrypto.so.1 in cd /lib/x86_64-linux-gnu. Works but now I've got a 3. error message.
https://bitcointalksearch.org/topic/m.8051769
Louiedave, which brand your 280x are , and what their gpu default engine exactly is?
Linux x64 binary : https://mega.co.nz/#!sopxDDRJ!gcQ-G8gCfC4fjWFrO77ImUtbwGgPiMZDSyvdc-s52vU
Thanks for uploading a Linux x64 binary!
But I get this error.
Code:
./sgminer: error while loading shared libraries: libssl.so.1: cannot open shared object file: No such file or directory
libssl1.0.0 and libssl-dev are installed.
you need openssl library on ur linux distro, try yum install openssl openssl-devel, or apt get, or anything
I will try that as soon as possible! THX
10.5Mhs(280x) at 64degC heat this is my setting
hope it helps...
"intensity" : "20",
"worksize" : "128",
"kernel" : "whirlcoin",
"no-submit-stale" : true,
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"vectors" : "1",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1162",
"gpu-fan" : "100",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
hope it helps...
"intensity" : "20",
"worksize" : "128",
"kernel" : "whirlcoin",
"no-submit-stale" : true,
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"vectors" : "1",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1162",
"gpu-fan" : "100",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
Linux x64 binary : https://mega.co.nz/#!sopxDDRJ!gcQ-G8gCfC4fjWFrO77ImUtbwGgPiMZDSyvdc-s52vU
Thanks for uploading a Linux x64 binary!
But I get this error.
Code:
./sgminer: error while loading shared libraries: libssl.so.1: cannot open shared object file: No such file or directory
libssl1.0.0 and libssl-dev are installed.
you need openssl library on ur linux distro, try yum install openssl openssl-devel, or apt get, or anything
well,looks like this shitty coin worth mining...
Linux x64 binary : https://mega.co.nz/#!sopxDDRJ!gcQ-G8gCfC4fjWFrO77ImUtbwGgPiMZDSyvdc-s52vU
Thanks for uploading a Linux x64 binary!
But I get this error.
Code:
./sgminer: error while loading shared libraries: libssl.so.1: cannot open shared object file: No such file or directory
libssl1.0.0 and libssl-dev are installed.
hmm i wonder if the settings need to be more inline with scrypt like a higher tc
My Whirlcoin TC is 100% in line with X11-15. Scrypt TC 32765 (and w 512).
Maybe you should try the SPH-SGMiner:
http://cryptomining-blog.com/3120-updated-sph-sgminer-fork-with-whirlpool-algorithm-support/
yeah i'll give it a whirl
Jump to: