Topic: [Instruction]Detailed manual for Dragon 1T Miner - page 2. (Read 6140 times)

https://dl.dropboxusercontent.com/u/92967009/dragon_image.7z

Where is the image for mine with ver2.0 MB without LCD

Thanks.

                 [/b]

Part 1. Preparation:
Before connecting and operating the miner,some preparations are necessary:
Preparation 1. Preparing one power socket,voltage 100-240V AC, 5-8A, power 1200W,and the most important is preparing one plug transfer device or one desktop computer power cable with right plug.The power cable plug you get from the package is Chinese Plug.
Preparation 2. Preparing one Router,and one laptop or desktop computer connecting to that Router by wireless wifi or cable.And leave an empty socket in Router for your miner.The router gateway IP should be 192.168.1.1,which is very important.(If router gateway is 192.168.0.1,please change router gateway IP into 192.168.1.1)
Preparation 3. Applying one or several login accounts from Mining POOL website,such as https://www.btcguild.com; and strongly suggest you prepare 3-5 login account,in case of any damage or disconnected with MINING POOL. Remember,record the POOL ADD,as well as connecting port number.

Part 2. Installation Instruction:
Step 1: Open the package and you will find three items in the box.
  1) Dragon 1T ASIC bitcoin miner*1pcs
  2) Chinese standard Power cables (110-240V)*1pcs;
  3) Network cable*1pcs;

  
Step 2: Connect the power cables to the power supply (if the plug is not suitable for your country,please connect via a transfer device) and connect the network cables to the router.
    
Step 3: Turn on the power switch on the miner to get the miner work. Meanwhile, turn on your laptop or desktop.
Step 4: On your laptop, open browser, visit the miner controller through its ip address(the default ip address of miner is 192.168.1.10 , if there is a tag with number X(28 in the above picture)on the miner ,the default ip address would be 192.168.1.X(28 in this case) .
Note: because the third number of default ip address is 1, you should make sure that the third number of the ip address of your router is 1. If it is 0,please set it into 1.Otherwise, you will not be able to open the controller.
Step 5: Type the ip address of miner into the browser, you will open the controller like the following picture.


Step 6: Change the default ip address of miner.
If you want to change the ip address of the miner, change the first row of controller(make sure it is correctly filled) and click the tag “Set Network”,then wait at least two minutes, the system will reboot and change the ip address to the new one you set.
If you cannot get access to the new address after that, take the miner offline by close its power and wait at least another two minutes to let the miner completely closed. The ip address will change to the new address you set after re-open.
Note: Do not skip the wait time here, if you close and re-open the miner too fast, it is possible to mess the net work configuration and you will not be able to get access to the controller and you need re-write the sd card in rhpery pi to set it to default.  
Step 7: Change the mine pool and mine account
Filled the first text box of second row with the address of the first pool, the second text box with your account and the third text box with any number as password(123 or 1234,ect).
Filled the second row with the information of the second pool just like the first row.
Note: if you want to leave the second and third pool blank, make sure the “/” was kept.
Step 8:if all configuration is correctly setted and the miner is re-opened, the green lamp of the miner should blink continuously.
Step 9: Set “Difficulty” according to different POOL,1024 or 512 or others.Then click the first choice “Start” of the radio button as chosen status, and click the tag with “Confirm”. the miner will start to work and the green lamp of the miner will shine constantly,”Opearting status”value is “Running”.Click “Real-time monitoring” to check the running details as belows:

Step 10. Click the tag “Refresh” to check whether the miner work correctly, if all thing is fine, you should see a window like this:

Congratulations! You made the miner worked. If you cannot get the miner working,please double check your router or set your router or IP address.

Note: if the power was interrupted and re-connected, the miner would not be able to start automatically, you need to get it online manually.

Step 11. Log in your first POOL to monitor the miners working status.All are correct,if your miner works like this:

There must be something wrong if you get the status like this as belows,please check your network status.

That is all for the installation instruction for your miner.Any questions or any doubt,contact our team right now.


Problem Shooting:

most of the problem are caused by the loose of the connection cable during the shipment and i will describe some typical case and the resolution method

1) the miner does not work after connecting the power cable, the green light in the blade does blink
This problem is caused by the loose even disconnected of power cable between psu--power circuit board--blade, you need to check whether every cable are rightly plugged in.


2) one or two blade can not work after opening the miner, so the hash rate can not achieve 1T

this is also a problem caused by loose cable, the power supply between circuit board--blade loose and you need check whether the cables are rightly plugged in

3) The lcd screen become red and white as soon as the power switch are opened.

first, you need to check whether the fans start when power on. if it does not start, it is possible that the power cable of the fans loose, open the box and re-plug the cable will resolve the problem

second if all of the fans start rightly, but the lcd screen still become red and white as soon as the power cable is connected, you need to check whether you still can visit the controller and get the miner, if it is true, then the problem caused by the wrong position of temperature sensor, you can ignore it and just let the miner work

4) the back up img file
backup image of the SD card from one of my dragon 1TH/s miner (4 blade version) you can download from link below.
https://dl.dropboxusercontent.com/u/92967009/dragon_image.7z  (7.9Gb image compressed to 570Mb)
after uncompressed it can be restored/written to 8GB sd card with Win32DiskImager downloaded from here: http://sourceforge.net/projects/win32diskimager/
 to the 4 blade english ISO.  When unzipped willl be a little under 8 gig.  It's ip is http://192.168.1.134/