Topic: [Interest Check] Blockchain at Berkeley Coin (Read 6064 times)
Yep, still wanting the COA. Might have a look at that course as well, saw that a little while back and spotted you as part of the team there. Good work EOD
Hey everyone, I haven't been very active on here lately as there has been a lot going on. Starting three companies while being a full time student keeps me pretty busy haha
chronicsky and monkeynuts paid for the COA, let me know if you guys would like the funds sent back, when/if the COA's are made you both way overpaid with the increase in btc price. Will pm both if I don't hear from you in the next few days.
All of the speakers at our conference received one of these coins so know that if you're a B@B coin owner you are one of an elite few: https://cesc.io/
Also if any of you are interested in the initiatives I am currently working on:
https://blockchain.berkeley.edu/
https://bab.teachable.com/courses
http://www.dekrypt.io/
http://www.veritasdd.com
chronicsky and monkeynuts paid for the COA, let me know if you guys would like the funds sent back, when/if the COA's are made you both way overpaid with the increase in btc price. Will pm both if I don't hear from you in the next few days.
All of the speakers at our conference received one of these coins so know that if you're a B@B coin owner you are one of an elite few: https://cesc.io/
Also if any of you are interested in the initiatives I am currently working on:
https://blockchain.berkeley.edu/
https://bab.teachable.com/courses
http://www.dekrypt.io/
http://www.veritasdd.com
Anyone interested in buying #18 unfunded?
Considering I never received a reply nor a PM regarding my previous question I'll ask again:
Are there any updates regarding the CoA? Time is flying by! And where do we stand in terms of price? $$ or a set BTC price?
Thanks,
Are there any updates regarding the CoA? Time is flying by! And where do we stand in terms of price? $$ or a set BTC price?
Thanks,
Planning on putting my hologram on soon here. Any tips for putting it on straight
Putting it on straight will require skill and patience but a few tips that have made that easier for me are below. These tips were used while creating my coin above:
- Use a line of masking tape to pick up the hologram off the wax backing and place it on the coin starting at the furthest point from the masking tape.
- Dust free environment helps from trapping stuff under the sticker during the assembly process and gently roll any "bubbles" out after placement.
- After full hologram placement remove the masking tape carefully or else you could cause a "VOID" mark where the masking tape was removed.
- Don't press down too hard on the center when sealing the hologram / rolling out any "bubbles" or the private key depression will show through the hologram.
Hopefully that helps and I'd recommend practicing on DIY coins if possible.
oh boy this did not turn out very well. good thing i bought two. i think ill look for professional help in the future when i try again.
i give great respect to the people that put tens of hundreds of holograms on coins
Sounds like you got some practice and that's the first step! Maybe I'll whip up a video in the near future if you think that could help.
Some video guides would definitely be awesome! I've been putting some DiY coins aside due to the fact that I'm worried about making a mistake. Would suck to do so when most sellers just send one extra or so, I'm not sure I'd be able to nail my first one in two tries. So please, do make these videos and add a donation address
Is there any new update regarding this coins and the holo's? Time surely flies by these days..
Planning on putting my hologram on soon here. Any tips for putting it on straight
Putting it on straight will require skill and patience but a few tips that have made that easier for me are below. These tips were used while creating my coin above:
- Use a line of masking tape to pick up the hologram off the wax backing and place it on the coin starting at the furthest point from the masking tape.
- Dust free environment helps from trapping stuff under the sticker during the assembly process and gently roll any "bubbles" out after placement.
- After full hologram placement remove the masking tape carefully or else you could cause a "VOID" mark where the masking tape was removed.
- Don't press down too hard on the center when sealing the hologram / rolling out any "bubbles" or the private key depression will show through the hologram.
Hopefully that helps and I'd recommend practicing on DIY coins if possible.
oh boy this did not turn out very well. good thing i bought two. i think ill look for professional help in the future when i try again.
i give great respect to the people that put tens of hundreds of holograms on coins
Sounds like you got some practice and that's the first step! Maybe I'll whip up a video in the near future if you think that could help.
Video would be awesome! I'd love to help edit/post it on Friends of Satoshi channel as a new playlist for educational resources if it is OK with you!
Planning on putting my hologram on soon here. Any tips for putting it on straight
Putting it on straight will require skill and patience but a few tips that have made that easier for me are below. These tips were used while creating my coin above:
- Use a line of masking tape to pick up the hologram off the wax backing and place it on the coin starting at the furthest point from the masking tape.
- Dust free environment helps from trapping stuff under the sticker during the assembly process and gently roll any "bubbles" out after placement.
- After full hologram placement remove the masking tape carefully or else you could cause a "VOID" mark where the masking tape was removed.
- Don't press down too hard on the center when sealing the hologram / rolling out any "bubbles" or the private key depression will show through the hologram.
Hopefully that helps and I'd recommend practicing on DIY coins if possible.
oh boy this did not turn out very well. good thing i bought two. i think ill look for professional help in the future when i try again.
i give great respect to the people that put tens of hundreds of holograms on coins
Sounds like you got some practice and that's the first step! Maybe I'll whip up a video in the near future if you think that could help.
Planning on putting my hologram on soon here. Any tips for putting it on straight
Putting it on straight will require skill and patience but a few tips that have made that easier for me are below. These tips were used while creating my coin above:
- Use a line of masking tape to pick up the hologram off the wax backing and place it on the coin starting at the furthest point from the masking tape.
- Dust free environment helps from trapping stuff under the sticker during the assembly process and gently roll any "bubbles" out after placement.
- After full hologram placement remove the masking tape carefully or else you could cause a "VOID" mark where the masking tape was removed.
- Don't press down too hard on the center when sealing the hologram / rolling out any "bubbles" or the private key depression will show through the hologram.
Hopefully that helps and I'd recommend practicing on DIY coins if possible.
oh boy this did not turn out very well. good thing i bought two. i think ill look for professional help in the future when i try again.
i give great respect to the people that put tens of hundreds of holograms on coins
PM me your address and I'll mail you out a few extra holograms.
Planning on putting my hologram on soon here. Any tips for putting it on straight
Putting it on straight will require skill and patience but a few tips that have made that easier for me are below. These tips were used while creating my coin above:
- Use a line of masking tape to pick up the hologram off the wax backing and place it on the coin starting at the furthest point from the masking tape.
- Dust free environment helps from trapping stuff under the sticker during the assembly process and gently roll any "bubbles" out after placement.
- After full hologram placement remove the masking tape carefully or else you could cause a "VOID" mark where the masking tape was removed.
- Don't press down too hard on the center when sealing the hologram / rolling out any "bubbles" or the private key depression will show through the hologram.
Hopefully that helps and I'd recommend practicing on DIY coins if possible.
oh boy this did not turn out very well. good thing i bought two. i think ill look for professional help in the future when i try again.
i give great respect to the people that put tens of hundreds of holograms on coins
Sorry to hear about the delays but it is understandable.
As for the choices for those who already paid - seems like you are taking a very sensible approach to it and I'm certain that most of the collectors will appreciate it!
Can't wait to see the update regarding the CoA's.
As for the choices for those who already paid - seems like you are taking a very sensible approach to it and I'm certain that most of the collectors will appreciate it!
Can't wait to see the update regarding the CoA's.
Awesome! Thanks for the update and very cool to hear that you have some sweet projects on your plate! I sent you a PM with my address requesting the full refund - although I definitely will still be interested in the COA come fall, but I'll just pay again when the time comes. Thank you sir!
Hey! Any updates on the COA? I know the price has jumped quite a bit since you last posted about it - is it still 0.08?
I am wondering the same thing!
Bumping this, as previous inquiry went without response. Sent PM to OP
Will you post the reply to the thread? I assume you will but I just want to double check.
Yeah sure I can do that - Here is what I asked (in condensed form):
-Will you be able to fulfill these orders soon?
-Will price @ 0.08 remain the same due to the BTC price increase?
-If not, Will the pre-orders be refunded or will no refund be issued to those that pre-ordered since the price was lower at the time of sale?
Hello all. It's been a busy summer. Working full time on projects for a few major companies, also officially collaborating with IOTA. If you haven't checked them out you should!
Major reason for the delay is that the COA signer has been out of the country for a few months now and keeps extending. I hope to try and get these signed if he comes back over summer or when the fall semester starts at the end of August. This possible delay was the major reason why I asked that people not send payment for the COA's until I had them complete but some did anyway.
If you already paid for the COA and you would like me to send the 0.08BTC back please PM me your address. I plan to set the price at $100 (this includes shipping anywhere in the US, it will be slightly more internationally) whenever they ship. Those that have already paid will be refunded whatever the different is between 0.08BTC and $100 when I ship the COA if you choose to not get a full refund before then. Thank you for your patience!
Hey! Any updates on the COA? I know the price has jumped quite a bit since you last posted about it - is it still 0.08?
I am wondering the same thing!
Bumping this, as previous inquiry went without response. Sent PM to OP
Will you post the reply to the thread? I assume you will but I just want to double check.
Yeah sure I can do that - Here is what I asked (in condensed form):
-Will you be able to fulfill these orders soon?
-Will price @ 0.08 remain the same due to the BTC price increase?
-If not, Will the pre-orders be refunded or will no refund be issued to those that pre-ordered since the price was lower at the time of sale?
Hey! Any updates on the COA? I know the price has jumped quite a bit since you last posted about it - is it still 0.08?
I am wondering the same thing!
Bumping this, as previous inquiry went without response. Sent PM to OP
Will you post the reply to the thread? I assume you will but I just want to double check.
Hey! Any updates on the COA? I know the price has jumped quite a bit since you last posted about it - is it still 0.08?
I am wondering the same thing!
Bumping this, as previous inquiry went without response. Sent PM to OP
Hey! Any updates on the COA? I know the price has jumped quite a bit since you last posted about it - is it still 0.08?
I am wondering the same thing!
Did mine ship yet?
I am sure I will receive it shortly, I assume it's got to be near finals
I am sure I will receive it shortly, I assume it's got to be near finals
You will get it Saturday or Monday at the latest. Sorry for the delay in shipping, there was a misunderstanding with my gf who is shipping them since I told her to wait until payment was received but forgot to tell her when you sent it. Correct, this semester might be the death of me.
Eodguy149 - 4 days offline
Still waiting myself...
Still waiting myself...
Yours shipped out a while ago, you should be receiving it any day now, it did have to be shipped pretty far
Let me know if you don't receive it by Monday and I can contact the Post Office as it is insured.
#8, 19, 20, 21, and 24 are available!
I take #8 if still available!
Hey! Any updates on the COA? I know the price has jumped quite a bit since you last posted about it - is it still 0.08?
These came out really nice, I can't wait to load it. I received my coin a few days ago
Jump to: