Introduction - my small operation and photos

CryptoPatrizzle

brand new

Activity: 0

Merit: 0

Quote from: ridertiger on September 09, 2018, 02:54:51 PM

I don't know. I found this neighbor who is getting cheap electricity legally but I do not enough courage to start a bitcoin mining thing. Is there anything easier to get me started with my laptops GPU?

You can try downloading nicehash and mining using your laptops GPU. It will most likely not be worth it unless the power is pretty much free.

ridertiger

full member

Activity: 490

Merit: 110

I don't know. I found this neighbor who is getting cheap electricity legally but I do not enough courage to start a bitcoin mining thing. Is there anything easier to get me started with my laptops GPU?

instel7

brand new

Activity: 0

Merit: 1

It's looking good! Congratulations! Can someone explain me why he is attaching the mining devices to a wall facing another room? Got something to do with temperature control?

galambo

sr. member

Activity: 966

Merit: 311

It seems an intresting plan.
How much hashrate do you afford to get with your setup?
Also if you used to mine LTC back in the days, what do you mine now? I guess you might be mining bitcoins now Grin

Mining difficulty has decreased and also the profits in mining have reached bottom. Transactions fees are in small satoshis.
In such situation is investing onto such mining equipements and electricity affordable??
I had too looked up for setting a small scale farm but the profits are quite less and it makes me withdraw my idea to start a farm Cheesy

Nodata666

brand new

Activity: 0

Merit: 0

seems legit. good luck. happy mining

kramchers

full member

Activity: 854

Merit: 101

Quote from: alh on December 13, 2017, 06:25:35 PM

Quote from: ?? on ??

are you mining LTC on GPU?

As I read it, he is no longer is doing any GPU mining, and only using Avalon A7xx Bitcoin mining hardware.

You are correct pal, but what is the difference on mining between GPU and Avalon?
I think the statement that he said about good decision doing mining again it is because of the price in the market that goes really well.
i still on the stage of thinking to mine but the price of electricity in my country is really expensive.

1richkid

newbie

Activity: 74

Merit: 0

Is there really genuine mining?
Only if someone can help me out

terexova90

brand new

Activity: 0

Merit: 0

Excellent photo, I liked your installation.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: DolleTeam on July 02, 2018, 05:01:10 AM

@halminer,

To create a hot and a cold area is a really good idea. But I wont use cardboard. Just pure for the safety. It can get on fire really fast.
I also have a small and a big farm. @ the small farm location I use cast walls.
https://ibb.co/nLvePy
https://ibb.co/bsQePy

I am not sure how much heat the Avelon powersupply generate. I did not create a hole for the powersupply because, the bitmain powersupply does not generate a lot of heat.

Anyway good luck with futher improvements.

sheet rock is cheap use it instead.

dutchlincoln

member

Activity: 434

Merit: 30

Quote from: DolleTeam on July 02, 2018, 05:01:10 AM

@halminer,

To create a hot and a cold area is a really good idea. But I wont use cardboard. Just pure for the safety. It can get on fire really fast.
I also have a small and a big farm. @ the small farm location I use cast walls.
https://ibb.co/nLvePy
https://ibb.co/bsQePy

I am not sure how much heat the Avelon powersupply generate. I did not create a hole for the powersupply because, the bitmain powersupply does not generate a lot of heat.

Anyway good luck with futher improvements.

Now that's a hot basement! Grin

As good as the same setup i have. What cable size do you use for power? Do you meter it as well?

DolleTeam

newbie

Activity: 32

Merit: 0

@halminer,

To create a hot and a cold area is a really good idea. But I wont use cardboard. Just pure for the safety. It can get on fire really fast.
I also have a small and a big farm. @ the small farm location I use cast walls.
https://ibb.co/nLvePy
https://ibb.co/bsQePy

I am not sure how much heat the Avelon powersupply generate. I did not create a hole for the powersupply because, the bitmain powersupply does not generate a lot of heat.

Anyway good luck with futher improvements.

Halminer

newbie

Activity: 26

Merit: 29

Added a few more units including 821, 741, Pango M3, L3+ and S9.

https://imgur.com/IjGxrvr

https://imgur.com/UJVOCXB

https://imgur.com/IR0KGFP

https://imgur.com/MDwWIgd

https://imgur.com/N40qEtc

Feels like its time to setup the whole room, because the door is full Grin

ccgllc

copper member

Activity: 658

Merit: 101

Math doesn't care what you believe.

Quote from: Halminer on December 19, 2017, 11:56:44 AM

0.46 btc since september, most of it already invested back in the venture with pre-orders (just ordered a couple more 741s from cryptouniverse december batch).

I never used the S9. But the decision to buy the Avalon 741 was based on the fact that it was easier to purchase, and all the reviews here said it was way more reliable than the s9 units.

Free electricity

Please keep us posted on how long your free electricity remains free. I suspect somebody is going to eventually notice the huge jump and initiate a conversation with you about it.

Halminer

newbie

Activity: 26

Merit: 29

Quote from: FalconZA on February 20, 2018, 02:47:21 AM

Quote from: Halminer on February 08, 2018, 10:19:36 AM

Quote from: ?? on ??

I also like the cardboard doorway setup. I thought about doing something similar at my place but i got lazy and didn't look for a place to buy that large of a piece.

I also have a couple of the bitcoin miners instead of the Avalon's . Bitmain comes with the controller but you have to purchase the power supply.

You are right about the noise, i still need to figure out what to do about that at my place. Its in a separate room so well see.

I added 4 more units since my last post and got another one on the way. Will update once that one is installed.

The setup is definitely noisy, you can hear it across the warehouse (15000 sqf).

I had a bunch of those cardboard pieces sitting in storage, so that helped

You haven't found any dust issues with it sitting in a warehouse? Compared to a household?

Perhaps a good time to invest in some dust filtration blankets (which also acts as noise cancellation), to replace those cardboard boxes? I've seen some data centers in the past use some sort of material for this application. Not sure where to source it from.

The intake side of the miners is in our server room (AC cooled "clean" room). So no dust issues.

This cardboard thing is temporary. We will eventually build a box in the server room for the miners.

FalconZA

member

Activity: 182

Merit: 12

Quote from: Halminer on February 08, 2018, 10:19:36 AM

Quote from: ?? on ??

I also like the cardboard doorway setup. I thought about doing something similar at my place but i got lazy and didn't look for a place to buy that large of a piece.

I also have a couple of the bitcoin miners instead of the Avalon's . Bitmain comes with the controller but you have to purchase the power supply.

You are right about the noise, i still need to figure out what to do about that at my place. Its in a separate room so well see.

I added 4 more units since my last post and got another one on the way. Will update once that one is installed.

The setup is definitely noisy, you can hear it across the warehouse (15000 sqf).

I had a bunch of those cardboard pieces sitting in storage, so that helped

You haven't found any dust issues with it sitting in a warehouse? Compared to a household?

Perhaps a good time to invest in some dust filtration blankets (which also acts as noise cancellation), to replace those cardboard boxes? I've seen some data centers in the past use some sort of material for this application. Not sure where to source it from.

Halminer

newbie

Activity: 26

Merit: 29

Quote from: ?? on ??

I also like the cardboard doorway setup. I thought about doing something similar at my place but i got lazy and didn't look for a place to buy that large of a piece.

I also have a couple of the bitcoin miners instead of the Avalon's . Bitmain comes with the controller but you have to purchase the power supply.

You are right about the noise, i still need to figure out what to do about that at my place. Its in a separate room so well see.

I added 4 more units since my last post and got another one on the way. Will update once that one is installed.

The setup is definitely noisy, you can hear it across the warehouse (15000 sqf).

I had a bunch of those cardboard pieces sitting in storage, so that helped

Halminer

newbie

Activity: 26

Merit: 29

Quote from: practicaltexan on January 06, 2018, 10:18:14 PM

I like the cardboard doorway setup.

It works great. Cardboard works great for insulation. And it has a really high burning point, so catching on fire because of the miner is not an issue.

Just added a few more units to the setup, first post updated with new photos.

practicaltexan

newbie

Activity: 45

Merit: 0

I like the cardboard doorway setup.

I have wondered why the Avalon's don't come pre-packed with the controller but it has to be purchased separately.

You are right about the noise, however our 6 year old son sleeps with a noisemaker. I just turned that off and put the ant miner l3+ I have in his room. closed the heating vent to his room and let that thing heat his room.

We have an old house (1950's) and so not really insulated. Our gas heater was running to keep the house at 72 and his room was the most comfortable in the house. lol.

I told my wife we should buy one for each room.....yeah. she said no.

But back to the avalon controller, have those worked well being separate?

truenortheast

newbie

Activity: 14

Merit: 0

Quote from: jmigdlc99 on December 29, 2017, 02:50:30 AM

Just wondering why you never touched Bitmain's S9 Antminers when it is obviously more profitable (Bitmain's 13.5-14 TH at 1200watts vs Canaan's 7.3 TH at 110 watts)? Don't get me wrong i'm not telling you what to do or anything like that, i'm just curious about what you think.

Hey, sorry for the late reply. I picked the Canaan machines because of how much quieter they are than any other machine. To begin with, I was running the miners in the spare room in my condo and I've got 2 small kids, so sound is a major concern. Although I'm underwhelmed by their newest offerings, I'd still recommend Canaan products to anyone wanting to mine at home, strictly due to noise.

Halminer

newbie

Activity: 26

Merit: 29

Quote from: jmigdlc99 on December 29, 2017, 02:50:30 AM

Just wondering why you never touched Bitmain's S9 Antminers when it is obviously more profitable (Bitmain's 13.5-14 TH at 1200watts vs Canaan's 7.3 TH at 110 watts)? Don't get me wrong i'm not telling you what to do or anything like that, i'm just curious about what you think.

I missed the chance to buy them in november when I had the funds.

Quote from: truenortheast on December 27, 2017, 04:21:07 AM

Quote from: Yaboy on December 23, 2017, 10:28:29 PM

Quote from: Ssnider21 on December 20, 2017, 03:12:49 PM

I want to start out with 4 741's then progress from there. I missed the pre-order sale on cryptouniverse today but I live in the US so Blokforge should have the same pre-order sale soon. I have heard great things about the reliability of the Avalons. How has your experience been so far?

I was under the impression that the 741's are no longer available to buy from distributors or canaan.

That's probably accurate. The new a761 and a8 series are supposed to be rolling out in 4-6 weeks (end of January they say, but they're always late).

They're a little underwhelming, honestly. Off the top of my head they're 9ish and 11t respectively. The new units from Ebit look a lot more exciting. E9++ and E10. The first one is 10nm running at 18t and I dunno about the other one. They're already available for pre-order. I'm getting mine for 32000CNY each.

I've only run Canaan machines up until now, but I'm definitely ready to move up!

Same here.

Topic: Introduction - my small operation and photos (Read 7286 times)