Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1364. (Read 5352429 times)
July 06, 2016, 02:32:25 PM
Good works!!!!!!!!!!!!!
July 06, 2016, 02:27:17 PM
Block by omtest with his 15th Kano block! Number 6 for today! 
July 06, 2016, 01:57:50 PM
Got my 4 S9's this morning. S7's coming off line and S9's coming online!
July 06, 2016, 01:50:54 PM
Block by thedreamer with his 19th Kano block! We are only 3.5 hours into the new day and we have 3 blocks already!
Along with the fantastic block performance this month here at Kano I got some great news today...my bad S9 hashboard has been repaired and it has been happily hashing away along with the other two boards for the past 3.5 hours. It is so sweet to see this S9 Batch 3 hashing right at spec with 12.9THs and a HW error rate of only 0.0004%! The temps are perfect at 57/89 out in Toomim-land! Life is good!
Along with the fantastic block performance this month here at Kano I got some great news today...my bad S9 hashboard has been repaired and it has been happily hashing away along with the other two boards for the past 3.5 hours. It is so sweet to see this S9 Batch 3 hashing right at spec with 12.9THs and a HW error rate of only 0.0004%! The temps are perfect at 57/89 out in Toomim-land! Life is good!
That's a pretty fast turn around for bitmain. Did you have to send it to China?
I was trying to decide between sending it to China for warranty repair or to Denver for non-warranty repair so I asked Jonathan Toomim to pull the board and check for burn marks. If there were any I was going to just have him send it to Denver and pay for the repair. When he pulled the board, he immediately saw a loose component that actually fell off the board into his hand. It was a pair of cold solder joints that were just not done correctly. I decided to take a chance and gave Jonathan permission to solder it back on; a couple of minutes later and the board was back in business. It's been running perfectly for about 16 hours now.
https://i.imgur.com/ISoluKA.jpg
https://i.imgur.com/bQvB2Js.jpg
https://i.imgur.com/VpELWey.jpg
Nice job by 1H2BNM at the top of the Pool Stats list with his 1st Kano block!
I have only heard good things about Toomim hosting but that's five star service right there.
Yes, I saved 2 weeks...maybe 3 weeks worth of hashing that I would have lost if I had actually sent that board back to China. Jonathan Toomim is my hero and they always go above and beyond "standard" service!
July 06, 2016, 01:04:41 PM
block 24 >>>>> 419583
this is from 419000 to 419584
this is from 419000 to 419584
July 06, 2016, 12:25:20 PM
block no 5 today by 1H2BN_ with 5ph 3ph
with July 06, 2016, 11:57:33 AM
[/quote] number 23 >>>> 419561
so 24 made would be bad luck 26 made even luck 28 made good luck
this would be for the final 1000 blocks
579 passed so far 23 of 579 = 3.97% our 44th is about 2.88 %
so 397/288= 1.37 or 137% lucky vs 100% normal
July 06, 2016, 11:30:44 AM
Block by thedreamer with his 19th Kano block! We are only 3.5 hours into the new day and we have 3 blocks already!
Along with the fantastic block performance this month here at Kano I got some great news today...my bad S9 hashboard has been repaired and it has been happily hashing away along with the other two boards for the past 3.5 hours. It is so sweet to see this S9 Batch 3 hashing right at spec with 12.9THs and a HW error rate of only 0.0004%! The temps are perfect at 57/89 out in Toomim-land! Life is good!
Along with the fantastic block performance this month here at Kano I got some great news today...my bad S9 hashboard has been repaired and it has been happily hashing away along with the other two boards for the past 3.5 hours. It is so sweet to see this S9 Batch 3 hashing right at spec with 12.9THs and a HW error rate of only 0.0004%! The temps are perfect at 57/89 out in Toomim-land! Life is good!
That's a pretty fast turn around for bitmain. Did you have to send it to China?
I was trying to decide between sending it to China for warranty repair or to Denver for non-warranty repair so I asked Jonathan Toomim to pull the board and check for burn marks. If there were any I was going to just have him send it to Denver and pay for the repair. When he pulled the board, he immediately saw a loose component that actually fell off the board into his hand. It was a pair of cold solder joints that were just not done correctly. I decided to take a chance and gave Jonathan permission to solder it back on; a couple of minutes later and the board was back in business. It's been running perfectly for about 16 hours now.
https://i.imgur.com/ISoluKA.jpg
https://i.imgur.com/bQvB2Js.jpg
https://i.imgur.com/VpELWey.jpg
Nice job by 1H2BNM at the top of the Pool Stats list with his 1st Kano block!
I have only heard good things about Toomim hosting but that's five star service right there.
July 06, 2016, 10:29:11 AM
Block by thedreamer with his 19th Kano block! We are only 3.5 hours into the new day and we have 3 blocks already!
Along with the fantastic block performance this month here at Kano I got some great news today...my bad S9 hashboard has been repaired and it has been happily hashing away along with the other two boards for the past 3.5 hours. It is so sweet to see this S9 Batch 3 hashing right at spec with 12.9THs and a HW error rate of only 0.0004%! The temps are perfect at 57/89 out in Toomim-land! Life is good!
Along with the fantastic block performance this month here at Kano I got some great news today...my bad S9 hashboard has been repaired and it has been happily hashing away along with the other two boards for the past 3.5 hours. It is so sweet to see this S9 Batch 3 hashing right at spec with 12.9THs and a HW error rate of only 0.0004%! The temps are perfect at 57/89 out in Toomim-land! Life is good!
That's a pretty fast turn around for bitmain. Did you have to send it to China?
I was trying to decide between sending it to Chine for warranty repair or to Denver for non-warranty repair so I asked Jonathan Toomim to pull the board and check for burn marks. If there were any I was going to just have him send it to Denver and pay for the repair. When he pulled the board, he immediately saw a loose component that actually fell off the board into his hand. It was a pair of cold solder joints that were just not done correctly. I decided to take a chance and gave Jonathan permission to solder it back on; a couple of minutes later and the board was back in business. It's been running perfectly for about 16 hours now.
https://i.imgur.com/ISoluKA.jpg
https://i.imgur.com/bQvB2Js.jpg
https://i.imgur.com/VpELWey.jpg
Nice job by 1H2BNM at the top of the Pool Stats list with his 1st Kano block!
Way cool it was that "easy." Good work, Jonathan.
July 06, 2016, 10:12:11 AM
Block by thedreamer with his 19th Kano block! We are only 3.5 hours into the new day and we have 3 blocks already!
Along with the fantastic block performance this month here at Kano I got some great news today...my bad S9 hashboard has been repaired and it has been happily hashing away along with the other two boards for the past 3.5 hours. It is so sweet to see this S9 Batch 3 hashing right at spec with 12.9THs and a HW error rate of only 0.0004%! The temps are perfect at 57/89 out in Toomim-land! Life is good!
Along with the fantastic block performance this month here at Kano I got some great news today...my bad S9 hashboard has been repaired and it has been happily hashing away along with the other two boards for the past 3.5 hours. It is so sweet to see this S9 Batch 3 hashing right at spec with 12.9THs and a HW error rate of only 0.0004%! The temps are perfect at 57/89 out in Toomim-land! Life is good!
That's a pretty fast turn around for bitmain. Did you have to send it to China?
I was trying to decide between sending it to China for warranty repair or to Denver for non-warranty repair so I asked Jonathan Toomim to pull the board and check for burn marks. If there were any I was going to just have him send it to Denver and pay for the repair. When he pulled the board, he immediately saw a loose component that actually fell off the board into his hand. It was a pair of cold solder joints that were just not done correctly. I decided to take a chance and gave Jonathan permission to solder it back on; a couple of minutes later and the board was back in business. It's been running perfectly for about 16 hours now.
https://i.imgur.com/ISoluKA.jpg
https://i.imgur.com/bQvB2Js.jpg
https://i.imgur.com/VpELWey.jpg
Nice job by 1H2BNM at the top of the Pool Stats list with his 1st Kano block!
July 06, 2016, 09:12:47 AM
Block!
Looks like a big hitter too 
Was 2 quick network blocks before it, only 29 seconds after the block change, so a small one.
July 06, 2016, 09:07:18 AM
Block!
July 06, 2016, 07:13:31 AM
didn't even realised i hit a block ... yummy, 3rd block 419417 @ CK pool
July 06, 2016, 07:10:53 AM
Block by thedreamer with his 19th Kano block! We are only 3.5 hours into the new day and we have 3 blocks already!
Along with the fantastic block performance this month here at Kano I got some great news today...my bad S9 hashboard has been repaired and it has been happily hashing away along with the other two boards for the past 3.5 hours. It is so sweet to see this S9 Batch 3 hashing right at spec with 12.9THs and a HW error rate of only 0.0004%! The temps are perfect at 57/89 out in Toomim-land! Life is good!
Along with the fantastic block performance this month here at Kano I got some great news today...my bad S9 hashboard has been repaired and it has been happily hashing away along with the other two boards for the past 3.5 hours. It is so sweet to see this S9 Batch 3 hashing right at spec with 12.9THs and a HW error rate of only 0.0004%! The temps are perfect at 57/89 out in Toomim-land! Life is good!
That's a pretty fast turn around for bitmain. Did you have to send it to China?
July 06, 2016, 12:53:35 AM
I just published my app on google play store. It monitors CK pool performance. You can set up multiple accounts and break down your stats by miners.
You can also set up alerts for individual miners if their hash rates drop.
https://play.google.com/store/apps/details?id=com.tiongworks.drpool&hl=en
Give it a try! Feedback is welcomed!
1JihtML12AeDxqsfmyGYrvYzADkpxjxxqc
You can also set up alerts for individual miners if their hash rates drop.
https://play.google.com/store/apps/details?id=com.tiongworks.drpool&hl=en
Give it a try! Feedback is welcomed!
1JihtML12AeDxqsfmyGYrvYzADkpxjxxqc
Thanks! I was hoping for an update to the android version with alerts for individual miners. I'll check it out.
July 05, 2016, 11:22:34 PM
A bad time to run cold. Some quick math.
we are 40ph
90% luck earns 86.4btc per day
100% luck earns 96.0btc per day
110% luck earns 105.6btc per day
there are 992 blocks until the ½ ing that is 6.888 days
so our pool should earn 595 to 727 coins before the ½ ing
or 24 to 29 blocks . lets track it from now on
we are 40ph
90% luck earns 86.4btc per day
100% luck earns 96.0btc per day
110% luck earns 105.6btc per day
there are 992 blocks until the ½ ing that is 6.888 days
so our pool should earn 595 to 727 coins before the ½ ing
or 24 to 29 blocks . lets track it from now on
sorry was having lunch . block number 19 >>>>> 429417
block number 20 >>>>>>> 419483
July 05, 2016, 10:51:35 PM
Im loving this pre halving party
Of course it's random luck, but yeah looks like anyone who jumped ship coz of the bad few days, lost out doing that You can't predict when bad or good luck will happen, or change, and the 5Nd also ensures that.
Worse still, if you are mining on some other pool with a short N in their payout, a large short hash rate can more easily get no return.
July 05, 2016, 10:28:43 PM
Im loving this pre halving party
July 05, 2016, 10:18:29 PM
Block by thedreamer with his 19th Kano block! We are only 3.5 hours into the new day and we have 3 blocks already!
Along with the fantastic block performance this month here at Kano I got some great news today...my bad S9 hashboard has been repaired and it has been happily hashing away along with the other two boards for the past 3.5 hours. It is so sweet to see this S9 Batch 3 hashing right at spec with 12.9THs and a HW error rate of only 0.0004%! The temps are perfect at 57/89 out in Toomim-land! Life is good!
Along with the fantastic block performance this month here at Kano I got some great news today...my bad S9 hashboard has been repaired and it has been happily hashing away along with the other two boards for the past 3.5 hours. It is so sweet to see this S9 Batch 3 hashing right at spec with 12.9THs and a HW error rate of only 0.0004%! The temps are perfect at 57/89 out in Toomim-land! Life is good!
July 05, 2016, 09:40:43 PM
Block by TTravis with 77.06THs! Welcome to the Acclaim Board with your 1st Kano block!
We are starting another block party!
EDIT: Three payouts were confirmed! Woohoo!
Yeah it should be rare now for a payout to miss being in the next block due to me being asleep We are starting another block party!
EDIT: Three payouts were confirmed! Woohoo!
I've written some (reasonably simple) scripts to queue the payout to be sent just after the network block appears when it's matured.
It's still a manual step to 'queue' that command, but I can do it any time in advance after I've processed the payout.
Processing the payouts is where I spend a lot of time checking everything is all OK, but the transaction itself is just there ready to be sent once it's been processed.
I was actually testing this over the past week and the first night I ran it, the PC with all the bitcoin and monitoring software on it failed due to both raid1 disks, that contain (only) the internet accessible bitcoind (no wallet), failing during the night
Fortunately it seems it was a controller+linux glitch, and upgrading linux and moving a SATA cable brought the 2 disks back to life
--
Block
Glad it came out well...had something similar not long ago, and it also worked out OK due to finally getting more familiar with Linux.
Jump to: