Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1712. (Read 5352367 times)
February 14, 2016, 03:15:28 AM
Block
February 14, 2016, 12:16:49 AM
Cant delete just gotta let them expire and go inactive as it only shows active workers for last 7 days.
February 14, 2016, 12:12:25 AM
how to delete inactive workers in - main dashboard-workers-workers ?
February 13, 2016, 11:11:47 PM
DE node just spat the dummy though.
Sorry about that, had to restart it to get it to reconnect to the main pool.
Everyone on DE will have failed over.
It's back OK now.
Edit: the cause was a network issue with linode, but it wouldn't reconnect without me giving it a kick.
... and I had to kick it again 10 minutes ago ... and as I was typing it disconnected again now.Sorry about that, had to restart it to get it to reconnect to the main pool.
Everyone on DE will have failed over.
It's back OK now.
Edit: the cause was a network issue with linode, but it wouldn't reconnect without me giving it a kick.
I've raised a ticket with linode about 10 minutes ago ... awaiting a response ...
Edit: Meh - still no response from them.
Anyway - all is OK again for the last half an hour and the DE node is back up to it's usual 2PHs so all seems OK now.
February 13, 2016, 10:56:05 PM
TY. Was just wondering about that. I haven't used the other pools and don't need to, but still was curious how you had them connected.
Must be some crazy fast direct connection between the different nodes, eh?
Must be some crazy fast direct connection between the different nodes, eh?
February 13, 2016, 10:50:48 PM
Kano, are all the different nodes connected? I mean are they all working on the same block or are they competing.
No they aren't competing.Edit: though I'll point out the obvious about competing - if you ran 2 pools that pooled the rewards, competing doesn't matter.
You can't ever get 2 block rewards at the same height, and getting one of two means you lost nothing.
February 13, 2016, 10:48:13 PM
Kano, are all the different nodes connected? I mean are they all working on the same block or are they competing.
February 13, 2016, 10:46:52 PM
DE node just spat the dummy though.
Sorry about that, had to restart it to get it to reconnect to the main pool.
Everyone on DE will have failed over.
It's back OK now.
Edit: the cause was a network issue with linode, but it wouldn't reconnect without me giving it a kick.
Sorry about that, had to restart it to get it to reconnect to the main pool.
Everyone on DE will have failed over.
It's back OK now.
Edit: the cause was a network issue with linode, but it wouldn't reconnect without me giving it a kick.
February 13, 2016, 10:25:15 PM
Something up with the pool? All my miners went offline and to backups.
No. Check your internet.Weird. It happened from 3 different colocations and my home miners, so it's not my internet.
Was up and down a bunch of times over a 30 minute period, like it couldn't re-aquire the proper vardiffs.
Went back to normal after I posted my question though. LOL
February 13, 2016, 09:56:57 PM
Something up with the pool? All my miners went offline and to backups.
All of my S7s are mining at Kano, never failed over since the pool restart.
February 13, 2016, 09:55:50 PM
Something up with the pool? All my miners went offline and to backups.
No. Check your internet. February 13, 2016, 09:52:13 PM
Something up with the pool? All my miners went offline and to backups.
February 13, 2016, 09:41:22 PM
keep up the good work on the pool man really appreciate it
February 13, 2016, 09:39:28 PM
Thanks for all the status updates
February 13, 2016, 09:33:51 PM
Well 
With that block, I'll do a ckpool restart (not ckdb)
There's an update with ckpool to fix a memory leak and it would be ideal to do that shortly.
CKPool restart will be in 30 minutes when the minute hand next hits 30.
Most (over 99%) of miners just see it as a reconnect in cgminer - so most shouldn't failover.
Done. With that block, I'll do a ckpool restart (not ckdb)There's an update with ckpool to fix a memory leak and it would be ideal to do that shortly.
CKPool restart will be in 30 minutes when the minute hand next hits 30.
Most (over 99%) of miners just see it as a reconnect in cgminer - so most shouldn't failover.
Total users and workers is already back to the count before the restart - so all went OK.
Hash rate takes a while to recover the value.
February 13, 2016, 09:01:05 PM
Well With that block, I'll do a ckpool restart (not ckdb)
There's an update with ckpool to fix a memory leak and it would be ideal to do that shortly.
CKPool restart will be in 30 minutes when the minute hand next hits 30.
Most (over 99%) of miners just see it as a reconnect in cgminer - so most shouldn't failover.
With that block, I'll do a ckpool restart (not ckdb)There's an update with ckpool to fix a memory leak and it would be ideal to do that shortly.
CKPool restart will be in 30 minutes when the minute hand next hits 30.
Most (over 99%) of miners just see it as a reconnect in cgminer - so most shouldn't failover.
Should have restarted earlier.
February 13, 2016, 08:59:29 PM
Well With that block, I'll do a ckpool restart (not ckdb)
There's an update with ckpool to fix a memory leak and it would be ideal to do that shortly.
CKPool restart will be in 30 minutes when the minute hand next hits 30.
Most (over 99%) of miners just see it as a reconnect in cgminer - so most shouldn't failover.
With that block, I'll do a ckpool restart (not ckdb)There's an update with ckpool to fix a memory leak and it would be ideal to do that shortly.
CKPool restart will be in 30 minutes when the minute hand next hits 30.
Most (over 99%) of miners just see it as a reconnect in cgminer - so most shouldn't failover.
February 13, 2016, 08:53:32 PM
Block! Number 9 for jbravo!!
February 13, 2016, 08:12:59 PM
I have a little more than 300 more GH on the pool while I burn in test a miner repair.
The repaste of the second blade in my previously sick SP20 was successful (+>200GH on blade 1 and +>100GH on blade 2). The second blade didn't go as good as the first (I didn't get a back ASIC hit a remarkable 749 like I did on the first blade), but what I did get is more than reasonable. For the first time ever this miner can hit 1609GH in a 24C room which makes it one of my better performing SP20 miners. I think I would have gotten even more out of it except a couple of the DC/DC converters are running high in amps. Those ASICs, despite not being at full temperature, are hitting a "DC limit" wall in the 710 neighborhood. I notice that SP20s tend to throw more DCl as they age and this one has quite a long history (I got it from eBay and I'm probably the fourth owner based on the stack of shipping labels).
Too bad I'll be retiring this one soon due to diff increases. It's my first and only block finder.
The repaste of the second blade in my previously sick SP20 was successful (+>200GH on blade 1 and +>100GH on blade 2). The second blade didn't go as good as the first (I didn't get a back ASIC hit a remarkable 749 like I did on the first blade), but what I did get is more than reasonable. For the first time ever this miner can hit 1609GH in a 24C room which makes it one of my better performing SP20 miners. I think I would have gotten even more out of it except a couple of the DC/DC converters are running high in amps. Those ASICs, despite not being at full temperature, are hitting a "DC limit" wall in the 710 neighborhood. I notice that SP20s tend to throw more DCl as they age and this one has quite a long history (I got it from eBay and I'm probably the fourth owner based on the stack of shipping labels).
Too bad I'll be retiring this one soon due to diff increases. It's my first and only block finder.
February 13, 2016, 05:15:08 PM
There are a fair number of these questions re reward payouts...understandably, if one is also fairly new to pool mining. IMHO, kano.is is one place you don't need to worry about reward payouts. They'll get there. Patience. Kano is "Master and Commander..." and he's on the far side of the world to most of us (not me, but I'm plunk in the middle of the Pacific about 5,000 km from Adelaide). If you have problems with your configurations, you can get decent and reliable advice via here, or the newer support thread. Mine on. 
Jump to: