This is our 4th of BLOCK MONDAY!
This is after 3 Blocks yesterday!
Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 832. (Read 5352367 times)
September 11, 2017, 11:42:25 AM
Block by dfagundes with 28.46!
This is our 4th of BLOCK MONDAY!
This is after 3 Blocks yesterday!
This is our 4th of BLOCK MONDAY!
This is after 3 Blocks yesterday!
September 11, 2017, 10:47:04 AM
Thanks....appreciate that.....so the lights started flickering, and though I hated to pull the plug...thought I'd better lean on the side of caution. Hopefully be able to spin back up in a few hours.....
Yeah, when the lights start flickering it's best to unplug. Even if it doesn't out-right damage it, those power fluctuations can cause premature failure of the electronics down the road.
September 11, 2017, 10:43:15 AM
Hey guys.....I've had my two 741s running about 36 hrs now with no interuption, but decided to shut them down now as the storm is making it's way thru Georgia....being the noob I am and not really up to speed on 5nd....how long before I need to come back up before it affects my numbers......thanks.
Going off-line will start effecting your 5Nd immediately. It will start dropping slowly at about the same speed as it ramped up.
If you can get it back on-line within, say, 8 hours (two of those pink columns on the Workers-> Graph page) you will be able to bounce back up pretty quickly depending on how fast we find blocks.
I'm sure others will have a better answer for you, but that understanding works for me! ;-)
EDIT: I am in the North Carolina mountains and we are starting to get some rain and wind. Not sure if I will need to take my miners down, but I will wait and see what arrives.
Thanks....appreciate that.....so the lights started flickering, and though I hated to pull the plug...thought I'd better lean on the side of caution. Hopefully be able to spin back up in a few hours.....
September 11, 2017, 10:32:52 AM
Hey guys.....I've had my two 741s running about 36 hrs now with no interuption, but decided to shut them down now as the storm is making it's way thru Georgia....being the noob I am and not really up to speed on 5nd....how long before I need to come back up before it affects my numbers......thanks.
Going off-line will start effecting your 5Nd immediately. It will start dropping slowly at about the same speed as it ramped up.
If you can get it back on-line within, say, 8 hours (two of those pink columns on the Workers-> Graph page) you will be able to bounce back up pretty quickly depending on how fast we find blocks. (After giving the previous statement a little thought, I don't think it will matter how fast we find blocks.) I know enough to be dangerous! LOL
I'm sure others will have a better answer for you, but that understanding works for me! ;-)
EDIT: I am in the North Carolina mountains and we are starting to get some rain and wind. Not sure if I will need to take my miners down, but I will wait and see what arrives.
September 11, 2017, 10:18:35 AM
Hey guys.....I've had my two 741s running about 36 hrs now with no interuption, but decided to shut them down now as the storm is making it's way thru Georgia....being the noob I am and not really up to speed on 5nd....how long before I need to come back up before it affects my numbers......thanks.
September 11, 2017, 09:51:55 AM
No problem my friend!
I'll let you know as soon as I get them and install one. Don't know if it will fit your miner, I've never even seen an S9 with a 2 piece control board. In mine it just slides out after pulling back 2 little metal locks on the sides (One board) At the same time I'm pretty sure it is compatible and will work as long as you manage to install it on the miner somehow. In my opinion it should work and auto tune the hash boards that you have as long as your miner 11-12, 12.5-13, 13.5-14 th model. But you should Definitely consult the guy before you buy and I'm sure he will tell you. In any case the buyer protection is working on Aliexpress and you will get the money back if something doesn't work but you need to ask first. I bought some new bulbs for headlights once and they were like 2 days late so they gave me the money back. I'll let you know.
Yes, I'm sure it will work on mine. The newer control boards are all one piece. Bitmain sent me a link to buy one this morning and wanted $60 but said it will ship within 20 working days. I don't want to wait that long and will spend the extra $$ to get it in a week. Mine attaches the same way as yours. My old one just had an additional black board that plugged into the green The new ones do away with the black board and everything is self-contained on the green board.
Thanks so much for the info!
I apologize for being a bit off topic, but I'm trying to get an additional S9 hashing on our pool.
September 11, 2017, 09:46:47 AM
Had to do a little rewiring due to a 60 amp fuse blowing when I tried to run my electric clothes dryer.
The dryer is now on a separate circuit from the bitcoin miners.
The bitcoin miners are chugging along much happier now.
I lost several hours of bitcoin mining but thanks to the method of payment at Kano pool the payments only varied by a small amount.
The cooler months are in the near future and I will probably bring my S7LNs upstairs if for no other reason than to replace my wife's heater in the bedroom. After all, if you are going to heat with electricity it might as well be generating bitcoins!
On another note, Canaan is out of stock on the A741 as single unit sales but not out of stock for large orders.
I understand their hope to make more money with less work but this leaves me feeling a bit left out as I can
not afford $43000 or $49000 for a group of A741s
Lets hope they bring back single unit sales soon.
I hope everyone is staying high and dry as the weather disrupts our lives.
dzimmerm
The dryer is now on a separate circuit from the bitcoin miners.
The bitcoin miners are chugging along much happier now.
I lost several hours of bitcoin mining but thanks to the method of payment at Kano pool the payments only varied by a small amount.
The cooler months are in the near future and I will probably bring my S7LNs upstairs if for no other reason than to replace my wife's heater in the bedroom. After all, if you are going to heat with electricity it might as well be generating bitcoins!
On another note, Canaan is out of stock on the A741 as single unit sales but not out of stock for large orders.
I understand their hope to make more money with less work but this leaves me feeling a bit left out as I can
not afford $43000 or $49000 for a group of A741s
Lets hope they bring back single unit sales soon.
I hope everyone is staying high and dry as the weather disrupts our lives.
dzimmerm
September 11, 2017, 09:42:49 AM
You know this is the second time I buy a control board to replace and first time I got one on eBay and ended up paying like $185 with express shipping but the bastard didn't even had the board on hands and ended up sending it to me 20 days after I've made the payment!!! And I've received it like 27 days after
. I was so freaking pissed because I've lost like $400 while waiting for it!!! . This is the sellers name by the way "kurniaboss888". Anyway after another miners control board broke i stared looking for another place to buy because there is no way I would wait that long again! And pay that much when they are like $70 from bitmain (of course they never have it in stock). I found a guy on Aliexpress and here is the link to the board itself...
https://www.aliexpress.com/item/kuangcheng-s9-control-board-Applicable-to-ANTMINER-S9-14T-13-5T-13T-12-5T-12T-11/32828043453.html?spm=a2g0s.9042311.0.0.iP2lmv
I bought 3 from him on the 5th or 6th and they are already in the Local DHL so it was fast! I payed $77 for each and like $30 for the shipping of 3. Although I just checked when I was copying the link for you and he changed his price from $77 to $99 but I think it's still is better than an S9 just sitting when it can make you that $100 in a week working. If you like I can PM you tomorrow and let you know if what I got is good or not.
Yes, please let me know if it works. I see that is a 1 piece board. Where as mine is a two-piece. Would installing that one piece make my miner "auto-tune"? I really don't care if it does or not. It will just be nice to get back on-line.
Thanks for letting me know!!
EDIT: I quess I will be flashing the miner/board after installation with the appropriate firmware. In this case, 600MHz
No problem my friend!
I'll let you know as soon as I get them and install one. Don't know if it will fit your miner, I've never even seen an S9 with a 2 piece control board. In mine it just slides out after pulling back 2 little metal locks on the sides (One board) At the same time I'm pretty sure it is compatible and will work as long as you manage to install it on the miner somehow. In my opinion it should work and auto tune the hash boards that you have as long as your miner 11-12, 12.5-13, 13.5-14 th model. But you should Definitely consult the guy before you buy and I'm sure he will tell you. In any case the buyer protection is working on Aliexpress and you will get the money back if something doesn't work but you need to ask first. I bought some new bulbs for headlights once and they were like 2 days late so they gave me the money back. I'll let you know.
September 11, 2017, 09:08:39 AM
Expected is actually the # of blocks we expect as of the last block found. As to extrapolating to the end of the month, both the pool's hashrate and the Nd will change during the month so it'd be more of a guess. As Kano-san has it now, it's a direct measurement.
Mine on!
Mine on!
September 11, 2017, 08:54:17 AM
Block! by elcapodels9
Is it possible to add next to "Expected" (which is the expected # of blocks to this day, right?) a column showing the expected # of blocks for the month based on the average hashrate
Just thinking
September 11, 2017, 08:06:48 AM
Block! by elcapodels9
Wow, that is our 3rd of BLOCK MONDAY!
September 11, 2017, 08:05:23 AM
Block! by elcapodels9
Nice!!!
Keep the blocks coming....
September 11, 2017, 08:03:30 AM
Block! by elcapodels9
September 11, 2017, 05:53:56 AM
Block!!!
Faantastic!! My miners are slowly coming back online after surviving Irma. Only lost 18 hours of my 5d. Woot!Glad you survived and back online.
I just powered mine back up after about 10 hours of being offline and just over 23" of rain!!
I'm glad those miners affected by the storm are beginning to come back on-line. Powering down in case the power died or surged was the wisest decision! Welcome back!
MINE ON!!!!!!!!!!COMEONBLOCKSSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!!
September 11, 2017, 05:13:43 AM
Block!!!
Faantastic!! My miners are slowly coming back online after surviving Irma. Only lost 18 hours of my 5d. Woot!Glad you survived and back online.
I just powered mine back up after about 10 hours of being offline and just over 23" of rain!!
September 11, 2017, 05:09:31 AM
You know this is the second time I buy a control board to replace and first time I got one on eBay and ended up paying like $185 with express shipping but the bastard didn't even had the board on hands and ended up sending it to me 20 days after I've made the payment!!! And I've received it like 27 days after
. I was so freaking pissed because I've lost like $400 while waiting for it!!! . This is the sellers name by the way "kurniaboss888". Anyway after another miners control board broke i stared looking for another place to buy because there is no way I would wait that long again! And pay that much when they are like $70 from bitmain (of course they never have it in stock). I found a guy on Aliexpress and here is the link to the board itself...
https://www.aliexpress.com/item/kuangcheng-s9-control-board-Applicable-to-ANTMINER-S9-14T-13-5T-13T-12-5T-12T-11/32828043453.html?spm=a2g0s.9042311.0.0.iP2lmv
I bought 3 from him on the 5th or 6th and they are already in the Local DHL so it was fast! I payed $77 for each and like $30 for the shipping of 3. Although I just checked when I was copying the link for you and he changed his price from $77 to $99 but I think it's still is better than an S9 just sitting when it can make you that $100 in a week working. If you like I can PM you tomorrow and let you know if what I got is good or not.
Yes, please let me know if it works. I see that is a 1 piece board. Where as mine is a two-piece. Would installing that one piece make my miner "auto-tune"? I really don't care if it does or not. It will just be nice to get back on-line.
Thanks for letting me know!!
EDIT: I quess I will be flashing the miner/board after installation with the appropriate firmware. In this case, 600MHz
September 11, 2017, 04:31:02 AM
Block! by k4rth4l.
14.474 btc..
14.474 btc.
. Any one notice that the user name for the last block won is .S3 please tell me a S3 hit that freaking block that would be amazing!
September 11, 2017, 02:37:16 AM
Your hash rate can take an hour or two to level out.
Of course that can be high or low on the pool, but it takes a while to converge.
Also, of course, if you were almost continually mining, i.e. the stop+start was short, the 1hr hash rate will take longer to average out since it's not 'starting from now at zero' but instead averaging out the longer running lower hash rate with the higher new hash rate.
Of course that can be high or low on the pool, but it takes a while to converge.
Also, of course, if you were almost continually mining, i.e. the stop+start was short, the 1hr hash rate will take longer to average out since it's not 'starting from now at zero' but instead averaging out the longer running lower hash rate with the higher new hash rate.
Thanks, that's mostly what it was, I didn't realize the workers>>workers page was using the 1hr rate, for some reason I thought that was 5min. It's all leveled out now.
September 11, 2017, 02:33:03 AM
Block! by k4rth4l.
14.474 btc..
14.474 btc.
. September 11, 2017, 01:59:52 AM
Nobody is complaining.
. Tomorrow I'm getting the replacement control board for my S9, it is already in the local DHL office! Very cool! I know that feeling of getting a replacement that makes "things" right again!
I NEED a control board for one of my early batch S9's. It is the two-piece type and I believe it is the Beagle bone Black board that has failed. (It has some melted plastic on the back of the card that makes me think that is the culprit.)
I did swap it out with another S9 controller and that seems to be the problem. So I have one S9 totally off-line. It will only have two working hash boards when I get it back on-line. I'll worry about a board repair/replacement later.
My MAIN question is:: Where did you get the board from???
I have just in the last hour put in a ticket with Bitmain and Bitmain Warranty looking to get a repair or replacement for the board. Neither of these companies list it as being in stock. Guess I'll just have to wait and see.
Best wishes..... And of course,
COMEONBLOCKSSSSSSSSSSSSSSSSSSSSS!!!!
You know this is the second time I buy a control board to replace and first time I got one on eBay and ended up paying like $185 with express shipping but the bastard didn't even had the board on hands and ended up sending it to me 20 days after I've made the payment!!! And I've received it like 27 days after
. I was so freaking pissed because I've lost like $400 while waiting for it!!! . This is the sellers name by the way "kurniaboss888". Anyway after another miners control board broke i stared looking for another place to buy because there is no way I would wait that long again! And pay that much when they are like $70 from bitmain (of course they never have it in stock). I found a guy on Aliexpress and here is the link to the board itself...
https://www.aliexpress.com/item/kuangcheng-s9-control-board-Applicable-to-ANTMINER-S9-14T-13-5T-13T-12-5T-12T-11/32828043453.html?spm=a2g0s.9042311.0.0.iP2lmv
I bought 3 from him on the 5th or 6th and they are already in the Local DHL so it was fast! I payed $77 for each and like $30 for the shipping of 3. Although I just checked when I was copying the link for you and he changed his price from $77 to $99 but I think it's still is better than an S9 just sitting when it can make you that $100 in a week working. If you like I can PM you tomorrow and let you know if what I got is good or not.
Jump to: