At all the profit last 2 hours falls? or is it a statistics error?
no sure what you mean. no problems that I'm aware of.
Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 166. (Read 279744 times)
September 26, 2017, 12:32:13 PM
no sure what you mean. no problems that I'm aware of.
September 26, 2017, 12:29:50 PM
At all the profit last 2 hours falls? or is it a statistics error?
September 26, 2017, 01:26:33 AM
I connected D3-s on Zpool and for 14 hours, one D3 device (17 ghs) made 29,4 USD. That is lower than regular Dash pool?
Also I still waiting on payment and my balance is above 0.015.
Also I still waiting on payment and my balance is above 0.015.
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
September 25, 2017, 11:24:08 PM
it means that the pool knows it will take a while to mine enough to pay you, and BTC is a way to stop it from accumulating.
September 25, 2017, 11:09:07 PM
may I mine litecoin with my l3+ on this pool?
I am mining btc right now but I want to mine ltc
thanks
I am mining btc right now but I want to mine ltc
thanks
We are short of this currency (1.53334296 LTC). Please STOP your miners and switch to BTC until we find more LTC blocks.
YOU are responsible if you continue to mine for LTC dispite this warning.
this is the error message, what does it mean? Should I change it to BTC?
September 25, 2017, 10:48:09 PM
may I mine litecoin with my l3+ on this pool?
I am mining btc right now but I want to mine ltc
thanks
I am mining btc right now but I want to mine ltc
thanks
September 25, 2017, 07:27:38 PM
I've finally got one of zpool's D3 delivered and online. You can see the results here:
http://zpool.ca/?address=1LDQNsknrP6VUDdd1aqGWxoW9HBgYezEyZ
Cheers
http://zpool.ca/?address=1LDQNsknrP6VUDdd1aqGWxoW9HBgYezEyZ
Cheers
looks pretty good at the moment.
I have a question if I put c=BCC,skunk while mining skunk
will I convert the skunk to bcc and bcc will go to my bcc address of
1J7yySgHXdVCCZNpyqmxgGxwyC83HCPS78
im not sure if its BCC or BCH.... Crackfoo should comment on this one...
yeah I dunno which you really want. On my pool BCC = BitConnect and BCH is Bitcoin Cash...
You can mine any algo and get paid in whatever you want.... just the c=
September 25, 2017, 07:24:13 PM
Mining Xevan to be paid out in another alt coin. Noticed I am mining Skull sometimes, how can this coin be valued for exchange if it is not on an exchange?
What happens to my payouts in a different coin, how is it credited?
What happens to my payouts in a different coin, how is it credited?
https://novaexchange.com/market/BTC_SK21/
Maybe I didn't name it right
September 25, 2017, 06:45:20 PM
Mining Xevan to be paid out in another alt coin. Noticed I am mining Skull sometimes, how can this coin be valued for exchange if it is not on an exchange?
What happens to my payouts in a different coin, how is it credited?
What happens to my payouts in a different coin, how is it credited?
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
September 25, 2017, 04:14:07 PM
I've finally got one of zpool's D3 delivered and online. You can see the results here:
http://zpool.ca/?address=1LDQNsknrP6VUDdd1aqGWxoW9HBgYezEyZ
Cheers
http://zpool.ca/?address=1LDQNsknrP6VUDdd1aqGWxoW9HBgYezEyZ
Cheers
looks pretty good at the moment.
I have a question if I put c=BCC,skunk while mining skunk
will I convert the skunk to bcc and bcc will go to my bcc address of
1J7yySgHXdVCCZNpyqmxgGxwyC83HCPS78
im not sure if its BCC or BCH.... Crackfoo should comment on this one...
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
September 25, 2017, 04:12:49 PM
How to setup ccminer to mine specific coin from choosen algorithm?
I wanted to mine DGB coin, with skein algo, my batch:
Please tell me how to setup it properly, because I dont want to waste my time for jumping on not profitable coins
I wanted to mine DGB coin, with skein algo, my batch:
Code:
ccminer-x11gost -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u 1BzqJmN9nFu8Bjkybkx6AXRzYZDVsfABcy.evga -p skein,c=DGB
On wallet page I see that my miner is mining skein, but 'last 50 earnings' shows that pool jumps to all coins from skein algo.Please tell me how to setup it properly, because I dont want to waste my time for jumping on not profitable coins
go to page 1. read this thread.
its not unprofitable. you are not understanding the process.
September 25, 2017, 03:57:18 PM
How to setup ccminer to mine specific coin from choosen algorithm?
I wanted to mine DGB coin, with skein algo, my batch:
Please tell me how to setup it properly, because I dont want to waste my time for jumping on not profitable coins
I wanted to mine DGB coin, with skein algo, my batch:
Code:
ccminer-x11gost -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u 1BzqJmN9nFu8Bjkybkx6AXRzYZDVsfABcy.evga -p skein,c=DGB
On wallet page I see that my miner is mining skein, but 'last 50 earnings' shows that pool jumps to all coins from skein algo.Please tell me how to setup it properly, because I dont want to waste my time for jumping on not profitable coins
September 25, 2017, 02:31:50 PM
hi all.
where can I download cpuminer-opt/3.6.7?
how to configure it?
Hi!where can I download cpuminer-opt/3.6.7?
how to configure it?
I'm using this one: https://bitcointalksearch.org/topic/ann-cpuminer-opt-v3881-open-source-optimized-multi-algo-cpu-miner-1326803
But what to do next I do not understand... How to set up a Zpool and my wallet BTC?
I've made a bat file to start the miner.
First you have to find out what instruction set does your cpu support. (Download and install cpu-z, and look for "Instructions" section, one of mine supports only aes and sse42)
You can open notepad and place the miner exe wallet address etc in it.
For example:
Code:
cpuminer-aes-sse42.exe -a m7m -o stratum+tcp://m7m.mine.zpool.ca:6033 -u -p c=BTC -t 2
You can replace -a m7m with the algo you want (-a xevan, -a x11...)You should replace the server address and port to whatever you want to mine.
And you should pass the number of threads at -t, my cpu has only two cores and does not support HyperThreading, so I use -t 2, but my I7 cpu has 4 cores with HT, that's 8 threads (-t 8 ).
After you've set everything you can save the file (Save as...) in bat format, just type something like start.bat at filename, and save it in the same folder where the miner .exe files are located.
September 25, 2017, 02:16:09 PM
I've finally got one of zpool's D3 delivered and online. You can see the results here:
http://zpool.ca/?address=1LDQNsknrP6VUDdd1aqGWxoW9HBgYezEyZ
Cheers
http://zpool.ca/?address=1LDQNsknrP6VUDdd1aqGWxoW9HBgYezEyZ
Cheers
looks pretty good at the moment.
I have a question if I put c=BCC,skunk while mining skunk
will I convert the skunk to bcc and bcc will go to my bcc address of
1J7yySgHXdVCCZNpyqmxgGxwyC83HCPS78
September 25, 2017, 02:00:12 PM
hi all.
where can I download cpuminer-opt/3.6.7?
how to configure it?
Hi!where can I download cpuminer-opt/3.6.7?
how to configure it?
I'm using this one: https://bitcointalksearch.org/topic/ann-cpuminer-opt-v3881-open-source-optimized-multi-algo-cpu-miner-1326803
But what to do next I do not understand... How to set up a Zpool and my wallet BTC?
September 25, 2017, 01:47:01 PM
hi all.
where can I download cpuminer-opt/3.6.7?
how to configure it?
where can I download cpuminer-opt/3.6.7?
how to configure it?
Hi!
I'm using this one: https://bitcointalksearch.org/topic/ann-cpuminer-opt-v3881-open-source-optimized-multi-algo-cpu-miner-1326803
September 25, 2017, 09:30:03 AM
hi all.
where can I download cpuminer-opt/3.6.7?
how to configure it?
where can I download cpuminer-opt/3.6.7?
how to configure it?
September 25, 2017, 09:01:50 AM
I've finally got one of zpool's D3 delivered and online. You can see the results here:
http://zpool.ca/?address=1LDQNsknrP6VUDdd1aqGWxoW9HBgYezEyZ
Cheers
http://zpool.ca/?address=1LDQNsknrP6VUDdd1aqGWxoW9HBgYezEyZ
Cheers
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
September 24, 2017, 11:51:26 PM
Once your next balance reaches over .015, you will get a payment on the scheduled time that day. It will continue counting from what was unconfirmed, and you will see that balance slowly confirm and add to "Balance" throughout the day.
If you are no longer mining aand under 0.015btc; you wait till next sunday to get the final payout if it all confirms and becomes "Balance".
If you are no longer mining aand under 0.015btc; you wait till next sunday to get the final payout if it all confirms and becomes "Balance".
September 24, 2017, 10:25:07 PM
I just got my payout 67 sec ago; I think you are ok and getting paid in btc, just be sure the password flag is set.
Did you get a payout yourself as well?
the difference is your estimated balance/share earned but before confirmed and sold at exchange. So, you will see that number remain until it matures.
Did you get a payout yourself as well?
the difference is your estimated balance/share earned but before confirmed and sold at exchange. So, you will see that number remain until it matures.
yes I got paid .01015 btc As soon as i got paid I still instantly had a total unpaid balance of 0.00621034 BTC. does this mean i will not get that balance at all or do i just have to wait for it? Thank you.
Jump to: