Topic: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ - page 2. (Read 21638 times)

Thanks again for this service just used it to reload the noble coin wallet. Thanks for your hard work. Fish

Thanks Kiklo!!
much appreciated!

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


CLOAKCOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 1.9.7.56  used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      CloakcoinBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a CloakCoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from CloakcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\CloakCoin
Then open Cloakcoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Cloakcoin is closed
Go under c:\Users\"username"\AppData\Roaming\CloakCoin (for Windows) or in the Cloakcoin data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from CloakcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\CloakCoin
Then open Cloakcoin and it will start syncing the BlockChain from the last snapshot.

Once your Cloakcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Cloakcoin-qt.exe -rescan  
will take a little while but should correct your balance info.


Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



EINSTEINIUM BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 0.9.0.0-unk-beta used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      EinsteiniumBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a Einsteinium folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from EinsteiniumBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Einsteinium
Then open Einsteinium and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Einsteinium is closed
Go under c:\Users\"username"\AppData\Roaming\Einsteinium (for Windows) or in the Einsteinium data folder for other OSes
Then Delete 3  files :  .lock & db.log & debug.log
Then Delete 2 folders named : blocks & chainstate
Then Extract and copy the files from EinsteiniumBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Einsteinium
Then open Einsteinium and it will start syncing the BlockChain from the last snapshot.

Once your Einsteinium Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Einsteinium-qt.exe -rescan  
will take a little while but should correct your balance info.


Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

Sure it will be a ~week or so,
Hyper           √
Einsteinium  √
Cloakcoin    √

 

If possible to add CloakCoin (CLOAK) to the list?
 
http://cloakcoin.com/

Regards

BitBay snapshot removed New wallet release breaks the Snapshot.

BITBAY BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 1.0.0.1-g  used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      BitBayBlockChainSnapShot-(Date Created).rar
Download :    N/A

NEW Wallet: Install Instructions
Make a BitBay folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BitBayBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\BitBay
Then open BitBay and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure BitBay is closed
Go under c:\Users\"username"\AppData\Roaming\BitBay (for Windows) or in the BitBay data folder for other OSes
Then Delete 4  files :  .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from BitBayBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\BitBay
Then open BitBay and it will start syncing the BlockChain from the last snapshot.

Once your BitBay Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run BitBay-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://chainz.cryptoid.info/bay/#!network

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

Sure,  

Just started Syncing from Scratch, will post Snapshot & Bootstrap links in a few day.

Later,
Kiklo

Would you be willing to add BitBay (BAY) to the list?

nice kiklo ...

ill continue following this thread now mate ...

#crysx

ZEIT by itself will use a little over ~1GB of ram, if the system does not have at least 2 GB, it is probably going to be more trouble than success.
(System is probably Page Thrashing (http://www.geekinterview.com/question_details/3333) )


 

Today zeitcoind getinfo tells me that it has indexed 1500 Blocks. This seems to me a neverending Story.
I stopped it and start it new with bootstrap.dat .
By watching the content of debug.log it seems to be  a slow but continous process. I will try this.

The System ist a Rapsberry PI 3 with 1GB Ram.

Hmm,
Should be , check back in ~24 hours , and I will have an updated ZEIT snapshot to today's date.
If that updated snapshot fails, you could use the updated bootstrap instead.
(How much ram is in your system?)

 

FYI:

Hello, is the Snapshot usable with zeitcoind ? (The Commandline Version)
I tried it, but after 1 Day it seems to be stuck at 500 Blocks

A bootstrap.dat file allows a new wallet (not synced) to rapidly import the initial blocks from a local file instead of slowly downloading blocks from random peers
across the internet. Since you are pulling the blocks from your hard drive it is much faster than using the internet.
However when importing blocks the wallet does have to verify every block, which means a 2 or 3 year old chain can take a few days to import and tie up your memory & processor while verifying the blocks.

A Snapshot is a copy of the entire Wallet Database at the time the snapshot was made, it will already include any database directories & all database files.
It can be downloaded from the internet and it will start syncing from where it was created, without having to re verify and recreate the other database files & directories.
If you download & install a snapshot only created a day or so ago, after installing the snapshot it will be less than 1 hour before your wallet is synced and running.

Pros:
Snapshot will always be faster, as no re-verification of blocks is done.
Bootstrap will always be a smaller download, since it does not include all of the database files, just the one needed for the bootstrap.dat .

Cons:
Snapshots will always be a Bigger Download.
Bootstraps will always take more time to re-verify the blocks and tie up your PC.


 

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


808 BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 0.1.22-gd0cbc83 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      808-BlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a 808 folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from 808-BlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\808
Then open 808 and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure 808 is closed
Go under c:\Users\"username"\AppData\Roaming\808 (for Windows) or in the 808 data folder for other OSes
Then Delete 6  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log & addr.dat
Then Delete 1 folder named : database
Then Extract and copy the files from 808-BlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\808\
Then open 808 and it will start syncing the BlockChain from the last snapshot.

Once your 808 Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run 808.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://www.cryptopia.co.nz/BlockExplorer?coin=808

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



DIAMOND BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 2.1.0.4 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      DiamondBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a Diamond folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from DiamondBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Diamond
Then open Diamond and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Diamond is closed
Go under c:\Users\"username"\AppData\Roaming\Diamond (for Windows) or in the Diamond data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from DiamondBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Diamond
Then open Diamond and it will start syncing the BlockChain from the last snapshot.

Once your Diamond Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Diamond-qt-2104.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://chainz.cryptoid.info/dmd/#!network

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months


Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


E-CurrencyCoin BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version 2.4.7.5 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      E-CurrencyCoinBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a ECCoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from E-CurrencyCoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\ECCoin
Then open E-CurrencyCoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure E-CurrencyCoin is closed
Go under c:\Users\"username"\AppData\Roaming\ECCoin (for Windows) or in the E-CurrencyCoin data folder for other OSes
Then Delete 4  files :  .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from E-CurrencyCoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\ECCoin
Then open E-CurrencyCoin and it will start syncing the BlockChain from the last snapshot.

Once your E-CurrencyCoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run ECCoin-qt.exe -rescan  
will take a little while but should correct your balance info.


Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.