Hi,
I just posted a firmware mod for KnCminer 0.93, I thought you might be interested in it :
http://forum.kncminer.com/forum/main-category/main-forum/5712-bertmod-0-1-announcing-the-first-kncminer-unofficial-firmware-mod-available-now
uski
Topic: KNC ASIC Users Thread & FAQ - page 3. (Read 8761 times)
We got our 2 Jupiters on Monday.
Anyone who is getting a miner from KnC should be sure to open up the box, as both units had fans that had fallen loose and one unit had a couple of plugs that had wiggled their way free.
After checking that everything was ready to go, setup was a breeze and the miners have been running fairly stable. Averaging around 500+ on both, so good so far.
Anyone who is getting a miner from KnC should be sure to open up the box, as both units had fans that had fallen loose and one unit had a couple of plugs that had wiggled their way free.
After checking that everything was ready to go, setup was a breeze and the miners have been running fairly stable. Averaging around 500+ on both, so good so far.
Added an FAQ to the first post for questions I see coming up quite often.
Anything you'd like to add let me know.
Anything you'd like to add let me know.
hmm... what the hell is with that average?! Since friday i got 9BTC so the 5s should be correct?!
anyone any ideas?
anyone any ideas?
You should have minted @1TH/s to get 9btc with only 1 jup
You guys think I can put two Saturns on one power supply? Or is it better to just run each on it's own PS.
I have a 1200 Watt PS. I'd prefer to use one as it saves space.
Thanks for your input.
I have a 1200 Watt PS. I'd prefer to use one as it saves space.
Thanks for your input.
does anyone have any red light at front of the knc panel when minig?
what these mean?
what these mean?
no name
okay thanks for the reply. Nothing seems to be working. Any help would be greatly appreciated!
Regards,
Brian
no name
okay thanks for the reply. Nothing seems to be working. Any help would be greatly appreciated!
Regards,
Brian
no name
what does the miner show up as?
I can't seem to connect to the unit and hopefully isn't DOA. Such as my Avalon that was DOA.
any help would be greatly appreciated! I will give a bounty for helping me on this
Brian
I can't seem to connect to the unit and hopefully isn't DOA. Such as my Avalon that was DOA.
any help would be greatly appreciated! I will give a bounty for helping me on this
Brian
hmm... what the hell is with that average?! Since friday i got 9BTC so the 5s should be correct?!
anyone any ideas?
anyone any ideas?
To get the cgminer stats on a Jupiter I would just telnet and run cgminer on a laptop correct? Do I need to configure the settings and all? Or is there a way to just see the cgminer stats?
Turn ssh on in the web interface and ssh into it. cgminer runs in a screen session and will give you all the awful stats you want.
To get the cgminer stats on a Jupiter I would just telnet and run cgminer on a laptop correct? Do I need to configure the settings and all? Or is there a way to just see the cgminer stats?
After you SSH in just type "screen -r" and it should pop up.
To get the cgminer stats on a Jupiter I would just telnet and run cgminer on a laptop correct? Do I need to configure the settings and all? Or is there a way to just see the cgminer stats?
great idea. btw my photos here: http://imgur.com/a/hwZmh#0
Some controller cards seem to have 4 places to plug in modules and some have 6.
What happened there?
From talk on the IRC channel there is a wide variety of speeds reported, which I guess it related to how many cores are being disabled.
Some people say 0.90 was the fastest but for me it was the slowest
Personally mine is averaging 530 in CGMiner, usually showing about 20 less at pool, so I'd say yours is on the low side, but they do seem to take a while to stabilise and get up to speed.
There are no temp readings, whether there are sensors on the boards and not enabled yet in the firmware I don't know.
Ok cool, thanks.Some people say 0.90 was the fastest but for me it was the slowest
Personally mine is averaging 530 in CGMiner, usually showing about 20 less at pool, so I'd say yours is on the low side, but they do seem to take a while to stabilise and get up to speed.
There are no temp readings, whether there are sensors on the boards and not enabled yet in the firmware I don't know.
I'll keep an eye on it, this thread and KNC for further updates.
Please make sure to don proper attire when entering a room to troubleshoot a unit.
From talk on the IRC channel there is a wide variety of speeds reported, which I guess it related to how many cores are being disabled.
Some people say 0.90 was the fastest but for me it was the slowest
Personally mine is averaging 530 in CGMiner, usually showing about 20 less at pool, so I'd say yours is on the low side, but they do seem to take a while to stabilise and get up to speed.
There are no temp readings, whether there are sensors on the boards and not enabled yet in the firmware I don't know.
Some people say 0.90 was the fastest but for me it was the slowest
Personally mine is averaging 530 in CGMiner, usually showing about 20 less at pool, so I'd say yours is on the low side, but they do seem to take a while to stabilise and get up to speed.
There are no temp readings, whether there are sensors on the boards and not enabled yet in the firmware I don't know.
Good idea.
Jupiter running for about an hour with v0.93 fw connected to bitminter. CGminer looks to report 490-520G / ~470Gh/s for hash rates with bitminter reporting 430-450 range. Averaging about 10% HW rates from what I can tell.
430-450 is less than Sam was announcing but still more than I ordered, unless I'm reading something wrong or just need to give it more time.
When shipped the heat sink shrouds were popped off but in good looking shape other than that (was shipped to US).
Running it with case off and a overhead fan blowing down on it.
Does this match what you guys are seeing with your units?
Oh also, looking at cgminer using putty from a windows machine, I can't see any temperature readings. Some quick googling seems to indicate that isn't shown while remoting in, any idea if there is way to see this?
Thanks.
Jupiter running for about an hour with v0.93 fw connected to bitminter. CGminer looks to report 490-520G / ~470Gh/s for hash rates with bitminter reporting 430-450 range. Averaging about 10% HW rates from what I can tell.
430-450 is less than Sam was announcing but still more than I ordered, unless I'm reading something wrong or just need to give it more time.
When shipped the heat sink shrouds were popped off but in good looking shape other than that (was shipped to US).
Running it with case off and a overhead fan blowing down on it.
Does this match what you guys are seeing with your units?
Oh also, looking at cgminer using putty from a windows machine, I can't see any temperature readings. Some quick googling seems to indicate that isn't shown while remoting in, any idea if there is way to see this?
Thanks.
great idea. btw my photos here: http://imgur.com/a/hwZmh#0
Jump to: