Quick question can you post an image of it looks like with the lid on? Or doesn't it have a lid?
Here is a good album that you can check out.
It was posted by Xialla
http://imgur.com/a/hwZmh#9
Topic: KnCMiner Jupiter Miner First Impressions - page 29. (Read 65993 times)
Here is a good album that you can check out.
It was posted by Xialla
http://imgur.com/a/hwZmh#9
Can you clarify how these work as far as:
1) do they need to be connected to a computer, or do you merely access thru an ip address?
2) do you need your own power supply? (I have two decent ones I can use already.)
I have a somewhat early order, but figured I would figure this stuff out once I got it. :-D
1) do they need to be connected to a computer, or do you merely access thru an ip address?
2) do you need your own power supply? (I have two decent ones I can use already.)
I have a somewhat early order, but figured I would figure this stuff out once I got it. :-D
Quote
How can you mount 120mm fan on 140mm holes?
http://www.amazon.com/Bgears-BG01589-140mm-BK-Fan-Adapter/dp/B0043GMY1U/ref=sr_1_1?s=electronics&ie=UTF8&qid=1381150161&sr=1-1&keywords=120mm+to+140mm+adapter
Thats a good permanent solution. Thank you for the link.
I will first try and see if it helps before going full custom.
NP ! fans are my bag, been through so many types when finding the best for my watercooling setup. highest 140mm fan I've seen pushes 140CFM - Yateloon D14SH-12 http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_316&products_id=27361
Quick question can you post an image of it looks like with the lid on? Or doesn't it have a lid?
Quote
How can you mount 120mm fan on 140mm holes?
http://www.amazon.com/Bgears-BG01589-140mm-BK-Fan-Adapter/dp/B0043GMY1U/ref=sr_1_1?s=electronics&ie=UTF8&qid=1381150161&sr=1-1&keywords=120mm+to+140mm+adapter
Thats a good permanent solution. Thank you for the link.
I will first try and see if it helps before going full custom.
Quote
How can you mount 120mm fan on 140mm holes?
http://www.amazon.com/Bgears-BG01589-140mm-BK-Fan-Adapter/dp/B0043GMY1U/ref=sr_1_1?s=electronics&ie=UTF8&qid=1381150161&sr=1-1&keywords=120mm+to+140mm+adapter
I touched those VRM modules, they are very hot, so some kind of cooling should be provided, but the case fan is too weak, not even match the avalon's 120MM fan, but so far I have not find a 140mm fan providing enough airflow, they are all weak and quiet case fans
I agree. I have a few spare avalon fans that I will be swapping with the two front fans.
This is the improved results with just the case cover removed and an external fan blowing air over all the components.
Before airflow management change and firmware upgrade from stock v0.90
http://i.imgur.com/TKJbmJs.jpg
After airflow management Change and upgrade to firmware v0.92
sorry for bothering you again but I have to restate my two questions
(see https://bitcointalksearch.org/topic/m.3291576)
Quote
so you're going to replace this two front fans (http://i.imgur.com/DrBQn0G.jpg), right?
what is the exact type/model/brans of the avalon fans you're referring to?
thanks
I make reference to it
here https://bitcointalksearch.org/topic/m.2595714
and here
https://bitcointalksearch.org/topic/m.2595244
and will use these fans for the test found here
http://www.amazon.com/gp/product/B0045733JE/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
This is only a result of the firmware upgrade 
And that 15% hardware error rate is scaring 
And that 15% hardware error rate is scaring Here is an update with comparable results from original firmware and airflow to the new Setup and Firmware v0.93.
So far no cgminer restarts.
This is results with still open case and single fan placed on top of unit facing down to dissipate heat off the boards.
I touched those VRM modules, they are very hot, so some kind of cooling should be provided, but the case fan is too weak, not even match the avalon's 120MM fan, but so far I have not find a 140mm fan providing enough airflow, they are all weak and quiet case fans
I agree. I have a few spare avalon fans that I will be swapping with the two front fans.
This is the improved results with just the case cover removed and an external fan blowing air over all the components.
Before airflow management change and firmware upgrade from stock v0.90
http://i.imgur.com/TKJbmJs.jpg
After airflow management Change and upgrade to firmware v0.92
sorry for bothering you again but I have to restate my two questions
(see https://bitcointalksearch.org/topic/m.3291576)
Quote
so you're going to replace this two front fans (http://i.imgur.com/DrBQn0G.jpg), right?
what is the exact type/model/brans of the avalon fans you're referring to?
thanks
I touched those VRM modules, they are very hot, so some kind of cooling should be provided, but the case fan is too weak, not even match the avalon's 120MM fan, but so far I have not find a 140mm fan providing enough airflow, they are all weak and quiet case fans
I agree. I have a few spare avalon fans that I will be swapping with the two front fans.
This is the improved results with just the case cover removed and an external fan blowing air over all the components.
Before airflow management change and firmware upgrade from stock v0.90
After airflow management Change and upgrade to firmware v0.92
This is only a result of the firmware upgrade
And that 15% hardware error rate is scaring I touched those VRM modules, they are very hot, so some kind of cooling should be provided, but the case fan is too weak, not even match the avalon's 120MM fan, but so far I have not find a 140mm fan providing enough airflow, they are all weak and quiet case fans
I agree. I have a few spare avalon fans that I will be swapping with the two front fans.
How can you mount 120mm fan on 140mm holes?
I will have to use tie wraps just to test how the increased cfm helps cool the unit.
I touched those VRM modules, they are very hot, so some kind of cooling should be provided, but the case fan is too weak, not even match the avalon's 120MM fan, but so far I have not find a 140mm fan providing enough airflow, they are all weak and quiet case fans
I agree. I have a few spare avalon fans that I will be swapping with the two front fans.
How can you mount 120mm fan on 140mm holes?
Nice to see you right up there with the first to get hardware Sitarow.
Could you please ask KFCMiner[sic] to provide their modifications to the GPL3 code that is cgminer? Thanks.
Ckolivas, I lov that, KFCminer....good one...ha hahaha lol
I touched those VRM modules, they are very hot, so some kind of cooling should be provided, but the case fan is too weak, not even match the avalon's 120MM fan, but so far I have not find a 140mm fan providing enough airflow, they are all weak and quiet case fans
I agree. I have a few spare avalon fans that I will be swapping with the two front fans.
This is the improved results with just the case cover removed and an external fan blowing air over all the components.
Before airflow management change and firmware upgrade from stock v0.90
After airflow management Change and upgrade to firmware v0.92
I touched those VRM modules, they are very hot, so some kind of cooling should be provided, but the case fan is too weak, not even match the avalon's 120MM fan, but so far I have not find a 140mm fan providing enough airflow, they are all weak and quiet case fans
Nice to see you right up there with the first to get hardware Sitarow.
Could you please ask KFCMiner[sic] to provide their modifications to the GPL3 code that is cgminer? Thanks.
Just trying to get any time with Sam seems to be an impossible task.
Nice to see you right up there with the first to get hardware Sitarow.
Could you please ask KFCMiner[sic] to provide their modifications to the GPL3 code that is cgminer? Thanks.
Very nice pics!!!!!!!!! 
Thank you !!!!!!!!!! 
Only some snap together stuff popped off in shipping
Not bad,could be alot worse,look at some of the Avalon stories
Decent looking rig,I may look into one if the price drops by at least 25% The "next gen" 28nm stuff will use alot less power.
Congrats & happy mining !!!!!!!!!!!!!
Thank you !!!!!!!!!! Only some snap together stuff popped off in shipping
Not bad,could be alot worse,look at some of the Avalon stories Decent looking rig,I may look into one if the price drops by at least 25%
The "next gen" 28nm stuff will use alot less power.Congrats & happy mining !!!!!!!!!!!!!
Okay okay.
Due to popular demand.
Spoiler. (Geek Pron Below)
Unit 1 Good to go out of box.
Unit 2 Small delay out of box.
Album found at link below
http://imgur.com/a/Csbqt#0
Due to popular demand.
Spoiler. (Geek Pron Below)
Unit 1 Good to go out of box.
Unit 2 Small delay out of box.
Album found at link below
http://imgur.com/a/Csbqt#0
WTF You got no camera No Smartphone Kids with Smartphone Kids with tablet Wife with Smartphone Naked neighbor with Smartphone 
You got no camera No Smartphone Kids with Smartphone Kids with tablet Wife with Smartphone Naked neighbor with Smartphone I think unacceptable wants pictures
Jump to: