http://thebitcoinnews.co.uk/2014/08/03/korecoin-v2-0/
http://www.cryptoarticles.com/crypto-news/korecoin-v20-firxt-x13-with-full-anon-working-pos-looks-to-implement-darkkore-feature
Topic: ★★ KoreCoin v2.0 ★★ [KORE]New ERA - VOIP WALLET -100% ANON - 100% PoS - PoBAnon - page 214. (Read 372335 times)
August 03, 2014, 06:40:46 PM
We're on cryptorticles and thebitcoinnews.co.uk
http://thebitcoinnews.co.uk/2014/08/03/korecoin-v2-0/
http://www.cryptoarticles.com/crypto-news/korecoin-v20-firxt-x13-with-full-anon-working-pos-looks-to-implement-darkkore-feature
http://thebitcoinnews.co.uk/2014/08/03/korecoin-v2-0/
http://www.cryptoarticles.com/crypto-news/korecoin-v20-firxt-x13-with-full-anon-working-pos-looks-to-implement-darkkore-feature
August 03, 2014, 06:06:52 PM
i am online on the korecoin channel on mumble..is anyone coming in ?
August 03, 2014, 05:37:25 PM
hey guys..there seems to be a little problem...wehn i installed the new wallet it started syncing and started staking also...but now its not staking anymore...it says "not staking because you dont have mature coins"
Don't worry it's a common issue and related to not enough staking,
not enough wallets updated to V2.2 and blockchain difficulty.
Eurbids is more than aware and I'm basically quoting him.
I did try closing and opening my wallet a few times though...
but doubt it might do anything. that wasn't just more than being at the right time.
You will receive ALL payouts when it catches up by just keeping your wallet open even IF it says it's not staking.
It's not an issue. It's the normal PoS function.
Your coins must to be mature for mint and stake. And every time you going to stake this "counter" set back to zero and you have to wait again.
On KoreCoin the aspected time is from 1h to 8h. But every coin are different. I'm a ZeitCoin holder, for example, and Zeit mint one time every 20 days.
FaSan
There you go. 5 star answer!
August 03, 2014, 05:35:55 PM
hey guys..there seems to be a little problem...wehn i installed the new wallet it started syncing and started staking also...but now its not staking anymore...it says "not staking because you dont have mature coins"
Not a big deal if you see that message. As long as it shows there are coins being staked (on the left side of the wallet window) then staking is happening. Other than that sometimes one has to wait up to 8 hours before staking starts. Give it some time.
August 03, 2014, 05:33:51 PM
I have been creating addresses and sending a couple hundred Kore to each one and the coins show staking pretty quick. I noticed when I send coins it relocks my wallet and I have to unlock again to continue staking. Would it be possible to not lock from staking when I send some kore to a diff kore address? I didn't even realize my wallet was locked again for a few hours.
I've also noticed that my wallets are staking far more quickly than in the past (Which is great!)
The payouts are just taking a little longer, but that' fine because they are still the same amount for the same amount of time. Things should speed up as more people run wallets. August 03, 2014, 04:46:41 PM
ohh ok...thanks for saving me from panic-attack
August 03, 2014, 04:36:57 PM
hey guys..there seems to be a little problem...wehn i installed the new wallet it started syncing and started staking also...but now its not staking anymore...it says "not staking because you dont have mature coins"
Don't worry it's a common issue and related to not enough staking,
not enough wallets updated to V2.2 and blockchain difficulty.
Eurbids is more than aware and I'm basically quoting him.
I did try closing and opening my wallet a few times though...
but doubt it might do anything. that wasn't just more than being at the right time.
You will receive ALL payouts when it catches up by just keeping your wallet open even IF it says it's not staking.
It's not an issue. It's the normal PoS function.
Your coins must to be mature for mint and stake. And every time you going to stake this "counter" set back to zero and you have to wait again.
On KoreCoin the aspected time is from 1h to 8h. But every coin are different. I'm a ZeitCoin holder, for example, and Zeit mint one time every 20 days.
FaSan
August 03, 2014, 04:24:34 PM
I have been creating addresses and sending a couple hundred Kore to each one and the coins show staking pretty quick. I noticed when I send coins it relocks my wallet and I have to unlock again to continue staking. Would it be possible to not lock from staking when I send some kore to a diff kore address? I didn't even realize my wallet was locked again for a few hours.
Go into options.
You will see a setting to set aside coins to spend.
I would assume that might be useful.
August 03, 2014, 04:22:58 PM
hey guys..there seems to be a little problem...wehn i installed the new wallet it started syncing and started staking also...but now its not staking anymore...it says "not staking because you dont have mature coins"
Don't worry it's a common issue and related to not enough staking,
not enough wallets updated to V2.2 and blockchain difficulty.
Eurbids is more than aware and I'm basically quoting him.
I did try closing and opening my wallet a few times though...
but doubt it might do anything. that wasn't just more than being at the right time.
You will receive ALL payouts when it catches up by just keeping your wallet open even IF it says it's not staking.
August 03, 2014, 03:59:13 PM
hey guys..there seems to be a little problem...wehn i installed the new wallet it started syncing and started staking also...but now its not staking anymore...it says "not staking because you dont have mature coins"
August 03, 2014, 03:57:22 PM
I have been creating addresses and sending a couple hundred Kore to each one and the coins show staking pretty quick. I noticed when I send coins it relocks my wallet and I have to unlock again to continue staking. Would it be possible to not lock from staking when I send some kore to a diff kore address? I didn't even realize my wallet was locked again for a few hours.
August 03, 2014, 03:43:09 PM
August 03, 2014, 02:52:05 PM
just used mumble for first time..its pretty impressive...lets coordinate the meetup tonight.
hope to see more members joining in
hope to see more members joining in
Pretty cool app. After getting used to it I rather enjoyed it.
August 03, 2014, 02:46:20 PM
I've just been catching up on this thread and I must say KoreCoin is in MUCH better condition as of today. Everything working just fine and I anticipate things will only improve as the hours and days pass.
Good work, Eurbids!
Good work, Eurbids!
August 03, 2014, 11:56:57 AM
Another thing its for me is usually have 20/30 minutes after last block with very slow confirmation (like bitcon or more) maybe when all people update they wallet it will be fixed.
Yes, it is. Don't worry
August 03, 2014, 11:39:24 AM
With the update I recibe 5k korecoins form bittrex sent two days ago but I lost 1 korecoin that I had sent yesterday from bittrex.
Maybe wrong chain, I dont know
Maybe wrong chain, I dont know
Code:
Estado: 15 confirmaciones
Fecha: 02/08/14 23:32
Para: Bittrex KCDf41Afb22W58HVAD2Ku4mwjV3wZDBgGj
Débito: -1.00 KORE
Comisión de transacción: -0.01 KORE
Cantidad neta: -1.01 KORE
Identificador de transacción: c051b855334762f92fa0722d8940830e1fe20957e6735dca5ff0935ff7846fb3
Looking fine on blockchain : http://explorer.korecoin.org:2750/tx/c051b855334762f92fa0722d8940830e1fe20957e6735dca5ff0935ff7846fb3
You must to receive it. If not, start again your wallet with the option "-rescan" (ex korecoin-qt.exe -rescan).
In Mac OS the comand its the same? if yes, for my dont work "-rescan"
Yes and working, tested yesterday on my old archived wallet. You have to start the wallet with this option, not send the comand from the rpc interface. it means that you have to start the wallet from the comand line and append the option on it.
from the help :
Code:
-rescan Rescan the block chain for missing wallet transactions
after this wallet going to rescan the intere blockchain and check transactions for your stored addresses. It means that need time for finish scan and open the wallet window.
Code:
/Applications/korecoin-qt.app/Contents/MacOS/korecoin-qt -rescan
That works for me.
Another thing its for me is usually have 20/30 minutes after last block with very slow confirmation (like bitcon or more) maybe when all people update they wallet it will be fixed.
August 03, 2014, 11:21:33 AM
With the update I recibe 5k korecoins form bittrex sent two days ago but I lost 1 korecoin that I had sent yesterday from bittrex.
Maybe wrong chain, I dont know
Maybe wrong chain, I dont know
Code:
Estado: 15 confirmaciones
Fecha: 02/08/14 23:32
Para: Bittrex KCDf41Afb22W58HVAD2Ku4mwjV3wZDBgGj
Débito: -1.00 KORE
Comisión de transacción: -0.01 KORE
Cantidad neta: -1.01 KORE
Identificador de transacción: c051b855334762f92fa0722d8940830e1fe20957e6735dca5ff0935ff7846fb3
Looking fine on blockchain : http://explorer.korecoin.org:2750/tx/c051b855334762f92fa0722d8940830e1fe20957e6735dca5ff0935ff7846fb3
You must to receive it. If not, start again your wallet with the option "-rescan" (ex korecoin-qt.exe -rescan).
In Mac OS the comand its the same? if yes, for my dont work "-rescan"
Yes and working, tested yesterday on my old archived wallet. You have to start the wallet with this option, not send the comand from the rpc interface. it means that you have to start the wallet from the comand line and append the option on it.
from the help :
Code:
-rescan Rescan the block chain for missing wallet transactions
after this wallet going to rescan the intere blockchain and check transactions for your stored addresses. It means that need time for finish scan and open the wallet window.
August 03, 2014, 11:15:36 AM
With the update I recibe 5k korecoins form bittrex sent two days ago but I lost 1 korecoin that I had sent yesterday from bittrex.
Maybe wrong chain, I dont know
Maybe wrong chain, I dont know
Code:
Estado: 15 confirmaciones
Fecha: 02/08/14 23:32
Para: Bittrex KCDf41Afb22W58HVAD2Ku4mwjV3wZDBgGj
Débito: -1.00 KORE
Comisión de transacción: -0.01 KORE
Cantidad neta: -1.01 KORE
Identificador de transacción: c051b855334762f92fa0722d8940830e1fe20957e6735dca5ff0935ff7846fb3
Looking fine on blockchain : http://explorer.korecoin.org:2750/tx/c051b855334762f92fa0722d8940830e1fe20957e6735dca5ff0935ff7846fb3
You must to receive it. If not, start again your wallet with the option "-rescan" (ex korecoin-qt.exe -rescan).
In Mac OS the comand its the same? if yes, for my dont work "-rescan"
August 03, 2014, 10:49:29 AM
just used mumble for first time..its pretty impressive...lets coordinate the meetup tonight.
hope to see more members joining in
hope to see more members joining in
August 03, 2014, 10:34:27 AM
I wish there were a feature that the Dev of the Thread could PM everybody at once with any wallet updates.
This way most of them could get an email notification of that PM IF they select to be notified of posts from the thread
or PM's.
Maybe we should ask Bitcointalk to consider that option.
This way most of them could get an email notification of that PM IF they select to be notified of posts from the thread
or PM's.
Maybe we should ask Bitcointalk to consider that option.
It's calling spam. People that have interesting about one specific coin have to read the relative thread.
I can understand that.
But IF there was an option ONLY for coin threads and it could only be used for updates otherwise the
Thread owner will lose the privilege and option.
I'm from the school of "There's always a way"
And "There is no Box".
Me from the school of "don't crash balls to people and the world will smile you"
Move your focus to PoS, Mint and Stake, it's the must thing that we have to do now.
Jump to: