Topic: ★★ KoreCoin v2.0 ★★ [KORE]New ERA - VOIP WALLET -100% ANON - 100% PoS - PoBAnon - page 31. (Read 372327 times)

You can go to note pad.
Put the above mentioned info in there.
Save it as korecoin.conf
Put it in the folder mentioned and start up your wallet.
No need to remove any files or folders
Give it 10-15 min and restart if no connections.

I think?, what happened is you put your old Wallet.dat file in the folder
prior to starting up the wallet which only then will create a Wallet.dat file.
Might make sense to delete this wallet you are working with along with the unzipped wallet file in "downloads" and reinstall it.
Then open the wallet. Close it, wait a few min and then delete the wallet.dat file and put yours in there.
Create this korecoin.conf file and put that in there too and start up your wallet.
Make sure you have multiple copies of your original Wallet.dat file,... cold storage/off your computer.

Hope this helps...
Feel free to PM me with any concerns or questions.

MM

open korecoin.conf (or create new one if not available) in C:\Users\\AppData\Roaming\KoreCoin

paste this into that file:

Come on guys   I dont hawe a qlue what your talking about all the nodes and this and that lol ...the only thing i know is i hawe 10.000 kore and i can't open the wallet ....i just wanted a operating system that a good alternative to Skype ...easy simple evective  and working ...and now i dont even realy know if lost all my costs....

Hi Heureca, I suggest leaving the wallet open atleast 24hrs, the network is slow at the moment. You can try the latest bootstrap above for faster syncing.

bootstrap-20.2.16.dat  -  Block 401872 - 195.4Mb

https://mega.nz/#!SY8wxLwD!HcCLH5yrX5JC_-wE-BnzBaSt8b2gHlY_fzxsyi1zobA


Instructions

After starting the KORE wallet for the first time, close it and copy this file to your KORE wallet data folder (not the folder you run the wallet from)
Windows example C:\Users\YOUR_USERNAME\AppData\Roaming\KoreCoin   (never delete wallet.dat from this folder... backup wallet.dat)

Rename file to just bootstrap.dat without date stamp

start wallet again and sync away

try this node:

addnode=gpy2co2ik7jn7woy.onion:28556
addnode=xjmdb3rrlp5mjsor.onion:28556
addnode=c7golffjz4qcomts.onion:28556

18:21:43

Welcome to the KoreCoin RPC console.
Use up and down arrows to navigate history, and Ctrl-L to clear screen.
Type help for an overview of available commands.


22:10:59

getpeerinfo


22:10:59

[
{
"addr" : "127.0.0.1:50682",
"services" : "00000001",
"lastsend" : 1455937550,
"lastrecv" : 1455937551,
"conntime" : 1455924927,
"version" : 72291,
"subver" : "/KoreCoin v2.2.9.1 | Eurbids:2.2.9.1/",
"inbound" : true,
"startingheight" : 401831,
"banscore" : 0
},
{
"addr" : "127.0.0.1:50693",
"services" : "00000001",
"lastsend" : 1455937110,
"lastrecv" : 1455937129,
"conntime" : 1455924943,
"version" : 72210,
"subver" : "/KoreCoin v2.2.1 | Eurbids:2.2.1/",
"inbound" : true,
"startingheight" : 401831,
"banscore" : 0
},
{
"addr" : "127.0.0.1:50808",
"services" : "00000001",
"lastsend" : 1455936650,
"lastrecv" : 1455936650,
"conntime" : 1455925150,
"version" : 72210,
"subver" : "/KoreCoin v2.2.1 | Eurbids:2.2.1/",
"inbound" : true,
"startingheight" : 401831,
"banscore" : 0
},
{
"addr" : "127.0.0.1:52239",
"services" : "00000001",
"lastsend" : 1455937583,
"lastrecv" : 1455937583,
"conntime" : 1455926775,
"version" : 72291,
"subver" : "/KoreCoin v2.2.9.1 | Eurbids:2.2.9.1/",
"inbound" : true,
"startingheight" : 401831,
"banscore" : 0
},
{
"addr" : "127.0.0.1:52920",
"services" : "00000001",
"lastsend" : 1455936906,
"lastrecv" : 1455936906,
"conntime" : 1455927899,
"version" : 72210,
"subver" : "/KoreCoin v2.2.1 | Eurbids:2.2.1/",
"inbound" : true,
"startingheight" : 401831,
"banscore" : 0
},
{
"addr" : "127.0.0.1:53906",
"services" : "00000001",
"lastsend" : 1455937194,
"lastrecv" : 1455937194,
"conntime" : 1455929989,
"version" : 72200,
"subver" : "/KoreCoin v2.2 | Eurbids:2.2.0/",
"inbound" : true,
"startingheight" : 401831,
"banscore" : 0
},
{
"addr" : "127.0.0.1:54147",
"services" : "00000001",
"lastsend" : 1455936486,
"lastrecv" : 1455936486,
"conntime" : 1455930481,
"version" : 72210,
"subver" : "/KoreCoin v2.2.1 | Eurbids:2.2.1/",
"inbound" : true,
"startingheight" : 401831,
"banscore" : 0
},
{
"addr" : "127.0.0.1:56470",
"services" : "00000001",
"lastsend" : 1455936823,
"lastrecv" : 1455936823,
"conntime" : 1455935019,
"version" : 72210,
"subver" : "/KoreCoin v2.2.1 | Eurbids:2.2.1/",
"inbound" : true,
"startingheight" : 401831,
"banscore" : 0
},
{
"addr" : "127.0.0.1:57193",
"services" : "00000001",
"lastsend" : 1455937816,
"lastrecv" : 1455937816,
"conntime" : 1455936012,
"version" : 72200,
"subver" : "/KoreCoin v2.2 | Eurbids:2.2.0/",
"inbound" : true,
"startingheight" : 401831,
"banscore" : 0
}
]

Hiya,

You will now since you fired up the wallet.
It will not generate the new wallet.dat till then.
Let me post my peers for you.

MM

Greetings there mike 
I did not find a New wallet.dat in the new folder to replace it i just passt the my old wallet.dat  in die he New folder....
And i left the wallet for 30 Minuten open but it would not sync.

Hi heureca,

Hope you and yours are well and thanks for your dedication and for supporting the chain.
 

Yes, Just make sure you always close your wallet prior to replacing any files and your wallet.dat.
AND always make a few backups of your wallet.dat
Best to wait a couple min also since the kore wallet takes a bit of time to properly close.
Remove the new wallet.dat file and put yours in there and start her up.

How long was the problem going on that your wallet would not sync?
Was your wallet closed for awhile and you just recently opened it to sync?
We just now went and are going through the typical kore wallet stuck periods.

Being we lost a few stakers the chain gets stuck for longer periods of time.
IF you try to sync your wallet during these times the chain is stuck you won't be able to
so best to shoot me a PM to make sure you dont waste your time constantly
reloading a new wallet...



MkeMike

greetings i have two problems...1st the wallet would `t  sync. ...2nd i delatet my old wallet since it did to work anymore, but i saved the wallet.dat and passt it into the new wallet folder was this the right move??( please say that yes)

all the best from here to there

Please stake your coins to keep chain live.

Thanks,
Typical stuck chain problem Kore has always had and will not be in the new wallet.

I show 6 here as well so there are for sure many more we do not see.
Actually it is fluctuating between 3 and 6. There may be internet connectivity
issues due to weather etc.
We had been steady at 10+ for months in my wallet but noticed it dropped off
the last week. People could be away...
I am working on getting a few running on some servers.

To the Community:
We are working very hard behind the scenes on various Kore Team projects.
We appreciate your trust and patience and ask you to continue supporting
the Kore Network staking some of your Kore coins on as many computers as you can.
 
MikeMike

blockchain stuck @401640, we need more staking wallet.
Block explorer only have 6 peers online.

Well keep it up still holding onto my coins and they are staking nicely

Hi dmz,

I would say that is the understatement of the year!
 

Unfortunately we are unable to make mention of any of the KORE Team projects.
All we can tell you is the Team has continued to grow with quality people these last
few months and so have the amount and type of projects. We have the expectations
that those new team members will be able to free up some more time in the coming
weeks and months to devote to their and all our projects they so desire.

Thanks for all those securing the KORE Network staking their wallets and if you have not
been staking lately please do as much as you can on all devices till we are ready.

Sincerely,
MikeMike

Is there something we dont know... the jump in kore price...

Hi Justin,

We are receiving weekly updates from the coder. The Kore Community will be updated
when hurdles are overcome. No sense getting into the weekly coding issues.
Where we have been stuck for months is compiling the Windows wallet,
but half that time the coder had some personal matters and is back on track.
The Linux wallet has been for the most part completed, is in our possession,
but any testing is kind of futile since changes were made to get the windows
wallet compilation going means the Linux wallet is being modified.

No further updates will follow on this matter and any requests for updates
will be referred to this update, till we cross this Rubicon.

We on the Kore Team and the Coder do appreciate the Community's patience.
 
Rest assured, the Coder is competent and gone beyond in making this tech
be available.

MikeMike

No news for kore?