Topic: Leaserig reputation thread - martynw2000 (Read 3305 times)
Thanks Joe
Now I'm almost done my 12 hours hired session with GSD0 (7.2 MH/s)
Overall, I'm satisfy with the service I got.
Rate of the rig given as state.
Will return to uses your service again later.
Added : Just to share info to the other
my reject rate is about 1% @ ltc.ghash.io
Overall, I'm satisfy with the service I got.
Rate of the rig given as state.
Will return to uses your service again later.
Added : Just to share info to the other
my reject rate is about 1% @ ltc.ghash.io
Nope - hardly any hardware errors. There's nothing going wrong with any of my three rigs right now. In fact last night while the rigs weren't being rented, I was mining at multipool.us, and there were hardly any rejects at all.
I've just leased GSD0 and GSD2, mining at wafflepool.
Both rigs has over 10% rejects at the european server, us-east is much better. Where are the rigs located?
Edit:
Switched back to the european server and now it's better, maybe you had trouble with your internet connection? Wafflepool servers has been very reliable (I'm mining there with some gridseeds). Hashrate at leaserig.net for GSD2 is much too high at 11 MH, but pool rate is correct.
Both rigs has over 10% rejects at the european server, us-east is much better. Where are the rigs located?
Edit:
Switched back to the european server and now it's better, maybe you had trouble with your internet connection? Wafflepool servers has been very reliable (I'm mining there with some gridseeds). Hashrate at leaserig.net for GSD2 is much too high at 11 MH, but pool rate is correct.
The rigs are in the UK. GSD0 is 20 gridseeds, GSD2 is 4 gridseed blades, however right now only 3 are working properly due to one of the PSUs being faulty, I should have that resolved soon, but this is why when you rented the rig it was rated at 8.4Mh, not 11.4Mh. If I get it working then you'll benefit from the extra 3Mh/s free of charge.
Reject rate seems fairly normal to me. I've been sitting here watching the shares go by on both rigs for the past 5 minutes and there are lots and lots of accepted shares, and maybe the odd one that is rejected. Since wafflepool is a multi-pool, it's possible they were mining a quick coin or something that pushed the reject rate up. It happens. From my side however, everything looks nice and stable.
I have two gridseeds at the same server right now with under 0.5% rejects, so coinswitching cannot be the cause. Maybe you clocked your blades too high, do you have hardware errors?
I've just leased GSD0 and GSD2, mining at wafflepool.
Both rigs has over 10% rejects at the european server, us-east is much better. Where are the rigs located?
Edit:
Switched back to the european server and now it's better, maybe you had trouble with your internet connection? Wafflepool servers has been very reliable (I'm mining there with some gridseeds). Hashrate at leaserig.net for GSD2 is much too high at 11 MH, but pool rate is correct.
Both rigs has over 10% rejects at the european server, us-east is much better. Where are the rigs located?
Edit:
Switched back to the european server and now it's better, maybe you had trouble with your internet connection? Wafflepool servers has been very reliable (I'm mining there with some gridseeds). Hashrate at leaserig.net for GSD2 is much too high at 11 MH, but pool rate is correct.
The rigs are in the UK. GSD0 is 20 gridseeds, GSD2 is 4 gridseed blades, however right now only 3 are working properly due to one of the PSUs being faulty, I should have that resolved soon, but this is why when you rented the rig it was rated at 8.4Mh, not 11.4Mh. If I get it working then you'll benefit from the extra 3Mh/s free of charge.
Reject rate seems fairly normal to me. I've been sitting here watching the shares go by on both rigs for the past 5 minutes and there are lots and lots of accepted shares, and maybe the odd one that is rejected. Since wafflepool is a multi-pool, it's possible they were mining a quick coin or something that pushed the reject rate up. It happens. From my side however, everything looks nice and stable.
I've just leased GSD0 and GSD2, mining at wafflepool.
Both rigs has over 10% rejects at the european server, us-east is much better. Where are the rigs located?
Edit:
Switched back to the european server and now it's better, maybe you had trouble with your internet connection? Wafflepool servers has been very reliable (I'm mining there with some gridseeds). Hashrate at leaserig.net for GSD2 is much too high at 11 MH, but pool rate is correct.
Both rigs has over 10% rejects at the european server, us-east is much better. Where are the rigs located?
Edit:
Switched back to the european server and now it's better, maybe you had trouble with your internet connection? Wafflepool servers has been very reliable (I'm mining there with some gridseeds). Hashrate at leaserig.net for GSD2 is much too high at 11 MH, but pool rate is correct.
Dear all,
Had a few issues with power cuts today, I've added 10 minutes to everyone's lease free of charge as compensation.
Had a few issues with power cuts today, I've added 10 minutes to everyone's lease free of charge as compensation.
I'm now renting GSD0, suddenly it went offline, please fix. thanks
hi,
i hire your rig for 6 hours and i got 48% rejects for about 2 hours and 50 minutes
i hire your rig for 6 hours and i got 48% rejects for about 2 hours and 50 minutes
The rig is operating normally. I suspect it was a problem with the pool you were using. The other pool you had set up seemed normal.
hi,
i hire your rig for 6 hours and i got 48% rejects for about 2 hours and 50 minutes
http://cdn.imghack.se/images/5622ff033c0b07d7961a1e4f4cb3f5bd.jpg
i hire your rig for 6 hours and i got 48% rejects for about 2 hours and 50 minutes
http://cdn.imghack.se/images/5622ff033c0b07d7961a1e4f4cb3f5bd.jpg
i purchased a 48 hour contract. i am currently only 1/4 of the way through it, and this rig is fantastic. I will certainly be interested in purchasing again!
Thanks,
I'll add on an extra 30 mins for you. Glad you like the rig.
i purchased a 48 hour contract. i am currently only 1/4 of the way through it, and this rig is fantastic. I will certainly be interested in purchasing again!
hello martyn,
I have rented your rig for the last 12 hours. I am very satiesfied about the hash rate, but I hope you can help me out . I have also a rig with 12 gridseeds but the hash rate of my rig in the pool is the half of the rate what i see on my miner. I am using a windows 7 dual core with 2 GB and windows 7 64 Bit. I have configured cgminer 3.7.2. Do you have some tips how to solve this.
thanks in advance
I have rented your rig for the last 12 hours. I am very satiesfied about the hash rate, but I hope you can help me out . I have also a rig with 12 gridseeds but the hash rate of my rig in the pool is the half of the rate what i see on my miner. I am using a windows 7 dual core with 2 GB and windows 7 64 Bit. I have configured cgminer 3.7.2. Do you have some tips how to solve this.
thanks in advance
What pool are you using? Have you tried a different pool? It's possible that you're getting a lot of rejects on the pool you're using. Personally I've found the Gridseeds to be quite consistent at about 850Mhz. If you're pushing the speed of them over this, you might be getting a lot of hardware errors too that will lower the stats at the pool. Maybe send me a screenshot of your mining screen - that might give some clues as to what's going on.
hello martyn,
I have rented your rig for the last 12 hours. I am very satiesfied about the hash rate, but I hope you can help me out . I have also a rig with 12 gridseeds but the hash rate of my rig in the pool is the half of the rate what i see on my miner. I am using a windows 7 dual core with 2 GB and windows 7 64 Bit. I have configured cgminer 3.7.2. Do you have some tips how to solve this.
thanks in advance
I have rented your rig for the last 12 hours. I am very satiesfied about the hash rate, but I hope you can help me out . I have also a rig with 12 gridseeds but the hash rate of my rig in the pool is the half of the rate what i see on my miner. I am using a windows 7 dual core with 2 GB and windows 7 64 Bit. I have configured cgminer 3.7.2. Do you have some tips how to solve this.
thanks in advance
Support 10/10 !
Rigs speed CORRECT(even some more than suppose to be!)
No issues, everything works perfect.
Well working rigs with amazing support from martynw2000!
I was beginner at minning, but martynw2000 explained me everything, help up with set up rigs. And he answer my PM's after like 2 minutes
Simply the best.
You're welcome VladMaster, come back anytime and claim your free 30mins mining.
Support 10/10 !
Rigs speed CORRECT(even some more than suppose to be!)
No issues, everything works perfect.
Well working rigs with amazing support from martynw2000!
I was beginner at minning, but martynw2000 explained me everything, help up with set up rigs. And he answer my PM's after like 2 minutes
Simply the best.
GSD0 as expected. Recommended!
i've hired again with martynw2000 - GSD1 this time - excellent rig, stable and solid. i'll be back again, no doubt!
thanks dude.
thanks dude.
Lease extended by 30mins for free. Thanks for leaving positive feedback.
i've hired again with martynw2000 - GSD1 this time - excellent rig, stable and solid. i'll be back again, no doubt!
thanks dude.
thanks dude.
Review of martynw2000 leaserig rental.
I rented this rig for 24 hours and everything was great. rig showed (at pool) the expected hashrate with a very low number of rejects.
rig owner was polite and courteous, as you can see from above. I would certainly recommend this rig owner for rentals.
bets wishes,
Rus
I rented this rig for 24 hours and everything was great. rig showed (at pool) the expected hashrate with a very low number of rejects.
rig owner was polite and courteous, as you can see from above. I would certainly recommend this rig owner for rentals.
bets wishes,
Rus
You're welcome Rus, come back anytime.
Jump to: