If you look closely at the URL you provided, you will see that 12V1 and 12V2 are 20A (twenty amps) not 30A.
12V3, 12V4, 12V5 and 12V6 are 30A.
Therefofre, I cannot split 12V1 or 12V2, but I can split 12V3,12V4,12V5 and 12V6.
The issue is that I do not know which physical connector on the back are 12V1 and 12V2. Both of these connectors are 20A, not 30A as you indicated on your post.
Topic: LEPA G1600 PSU question - page 2. (Read 1805 times)
Yes, I know all that.
The issue specifically is that:
2 of the RED connectors are 20A
4 of the RED connectors are 30A
Which is which?
I specifically need to split the 30A but not the 20A.
The issue specifically is that:
2 of the RED connectors are 20A
4 of the RED connectors are 30A
Which is which?
I specifically need to split the 30A but not the 20A.
This is the most clear I can make this.
All of the red connectors are behind a 30A 12V rail.
They are ultimately the one and same 12V rail, but it is splitted for safety.
This is the case for most of the "multi-rail" PSUs.
This info is based on http://www.lepatek.com/eng/product_content/1/1/20/
Yes, I know all that.
The issue specifically is that:
2 of the RED connectors are 20A
4 of the RED connectors are 30A
Which is which?
I specifically need to split the 30A but not the 20A.
The issue specifically is that:
2 of the RED connectors are 20A
4 of the RED connectors are 30A
Which is which?
I specifically need to split the 30A but not the 20A.
The red connectors in this scheme are marked with the 12V rail:
The same view in the PSU back panel:
The same view in the PSU back panel:
http://www.jonnyguru.com/modules.php?name=NDReviews&op=Story&reid=283
I see the op's problem my guess would be
1 2 3
4 5 6
but jonnyguru website someone will be sure.
I get a ton of info from that site on the blogs.
I see the op's problem my guess would be
1 2 3
4 5 6
but jonnyguru website someone will be sure.
I get a ton of info from that site on the blogs.
I already know this, the issue is: Which connector is which rail?
http://www.lepatek.com/eng/product_content/1/1/20/
+12V1 20A
+12V2 20A
+12V3 30A
+12V4 30A
+12V5 30A
+12V6 30A
+12V1 20A
+12V2 20A
+12V3 30A
+12V4 30A
+12V5 30A
+12V6 30A
The Lepa G1600 has 6x 12V rails, going to 6x 12-pin connectors on the back of the PSU.
2 of the rails are 20A and 4 of the rails are 30A.
I need to get 8x PCIe pins with 12A each, meaning I need to split 2 of the 30A rails into 2 PCIe pins.
However, I cannot split the 20A rails since there is not enough power.
The problem is that I do not know which of the RED 12-pin connectors on the back are the 20A and which are the 30A.
Does anyone know which connectors are which rails (or current)?
2 of the rails are 20A and 4 of the rails are 30A.
I need to get 8x PCIe pins with 12A each, meaning I need to split 2 of the 30A rails into 2 PCIe pins.
However, I cannot split the 20A rails since there is not enough power.
The problem is that I do not know which of the RED 12-pin connectors on the back are the 20A and which are the 30A.
Does anyone know which connectors are which rails (or current)?
Jump to: