LIGHTNINGASIC LA100M,100MHS SCRYPT Miner, USD1999; LA1THS, USD1750.shipped out! - page 128.

dyland

full member

Activity: 238

Merit: 100

We must become the pitiless censors of ourselves.

Quote from: rammy2k2 on February 12, 2014, 07:23:26 AM

Quote from: guyver on February 12, 2014, 06:54:55 AM

im still waiting on the new firmware.
these gridseeds have been inconsistent.

speeds ranging from 0.6mh - 2.5mh never been above the 3mh

wow ... pretty unstable

^
This has got me a little worried...

guyver

full member

Activity: 216

Merit: 100

im running it through the controller board.
so no need to setup or mess about with the frequency

screenman

member

Activity: 112

Merit: 10

i run it with --freq=750

default is --freq=600

guyver

full member

Activity: 216

Merit: 100

Quote from: screenman on February 12, 2014, 07:47:34 AM

same here, i can get 3.5mhs, but after a few hours it drops down to 1.5mhs, after unplugging & restarting its ok again for a few hours

at least your getting above 3.5mh, I haven't seen my rig hit those speeds

worldlybedouin

sr. member

Activity: 376

Merit: 250

Quote from: screenman on February 12, 2014, 07:47:34 AM

same here, i can get 3.5mhs, but after a few hours it drops down to 1.5mhs, after unplugging & restarting its ok again for a few hours

I wonder if that's an issue with the existing firmware? Perhaps that's part of what they're working out with the new firmware?

screenman

member

Activity: 112

Merit: 10

same here, i can get 3.5mhs, but after a few hours it drops down to 1.5mhs, after unplugging & restarting its ok again for a few hours

rammy2k2

legendary

Activity: 1974

Merit: 1003

Quote from: guyver on February 12, 2014, 06:54:55 AM

im still waiting on the new firmware.
these gridseeds have been inconsistent.

speeds ranging from 0.6mh - 2.5mh never been above the 3mh

wow ... pretty unstable

guyver

full member

Activity: 216

Merit: 100

im still waiting on the new firmware.
these gridseeds have been inconsistent.

speeds ranging from 0.6mh - 2.5mh never been above the 3mh

mazedk

sr. member

Activity: 457

Merit: 250

Quote from: rammy2k2 on February 12, 2014, 04:40:07 AM

anyone got tracking numbers yet ?

Nope, hope to get it in the next couple days. And fingers crossed for a delivery during/after the weekend.

rammy2k2

legendary

Activity: 1974

Merit: 1003

anyone got tracking numbers yet ?

velvethammer2

member

Activity: 65

Merit: 10

what are you USA guys using for declared value?

TrollboxChamp

sr. member

Activity: 462

Merit: 250

Quote from: User705 on February 11, 2014, 09:45:33 PM

Quote from: TrollboxChamp on February 11, 2014, 09:43:11 PM

Quote from: velvethammer2 on February 11, 2014, 09:00:19 PM

Sick Pic jack sent me today:

http://screencast.com/t/e98jM8HEwn

I'm salivating looking at all that scrypt hashing power Cool

Order got confirmed. Now to wait for tracking Grin

Hmm confusing reaction. All that scrypt hashing means less for each miner and you are salivating?

More for me. I already placed my order.

User705

legendary

Activity: 896

Merit: 1006

First 100% Liquid Stablecoin Backed by Gold

Quote from: TrollboxChamp on February 11, 2014, 09:43:11 PM

Quote from: velvethammer2 on February 11, 2014, 09:00:19 PM

Sick Pic jack sent me today:

http://screencast.com/t/e98jM8HEwn

I'm salivating looking at all that scrypt hashing power Cool

Order got confirmed. Now to wait for tracking Grin

Hmm confusing reaction. All that scrypt hashing means less for each miner and you are salivating?

TrollboxChamp

sr. member

Activity: 462

Merit: 250

Quote from: Anotheranonlol on February 11, 2014, 09:22:20 PM

Quote from: worldlybedouin on February 11, 2014, 06:49:49 PM

Quote from: SheepOnDrugs on February 11, 2014, 06:00:19 PM

Quote from: worldlybedouin on February 11, 2014, 05:01:00 PM

Quote from: TrollboxChamp on February 11, 2014, 04:22:14 PM

CGminer will recognize this device. If you can run CGminer. You can run a gridseed asic!

That is my impression anyway and i think firmware is being made for the raspberry pi.

You have to use the custom version of cpuminer that is provided...ordinary builds of cgminer and the like won't work for these devices. There's also a USB driver which you need to install in order for Windows to correctly detect the device.

Yes, you are correct that users chirale and drfranz are working on a rasberry pi version but it's not ready yet...so you'll have to use the custom CPUminer program provided.

Isn't it working on Linux?

To my knowledge Gridseed has not released the source code for the custom CPUminer software...however, chirale/drfranz's rasberry pi version is linux based...so i don't know if that helps.

yes they released months ago

Quote from: velvethammer2 on February 11, 2014, 09:00:19 PM

Sick Pic jack sent me today:

http://screencast.com/t/e98jM8HEwn

he is making a killing on markup.. shovel buyers lining up Wink

And AMD/Newegg/Amazon isnt marking their GPU prices up?

TrollboxChamp

sr. member

Activity: 462

Merit: 250

Quote from: velvethammer2 on February 11, 2014, 09:00:19 PM

Sick Pic jack sent me today:

http://screencast.com/t/e98jM8HEwn

I'm salivating looking at all that scrypt hashing power Cool

Order got confirmed. Now to wait for tracking Grin

Anotheranonlol

hero member

Activity: 588

Merit: 504

Quote from: worldlybedouin on February 11, 2014, 06:49:49 PM

Quote from: SheepOnDrugs on February 11, 2014, 06:00:19 PM

Quote from: worldlybedouin on February 11, 2014, 05:01:00 PM

Quote from: TrollboxChamp on February 11, 2014, 04:22:14 PM

CGminer will recognize this device. If you can run CGminer. You can run a gridseed asic!

That is my impression anyway and i think firmware is being made for the raspberry pi.

You have to use the custom version of cpuminer that is provided...ordinary builds of cgminer and the like won't work for these devices. There's also a USB driver which you need to install in order for Windows to correctly detect the device.

Yes, you are correct that users chirale and drfranz are working on a rasberry pi version but it's not ready yet...so you'll have to use the custom CPUminer program provided.

Isn't it working on Linux?

To my knowledge Gridseed has not released the source code for the custom CPUminer software...however, chirale/drfranz's rasberry pi version is linux based...so i don't know if that helps.

yes they released months ago

Quote from: velvethammer2 on February 11, 2014, 09:00:19 PM

Sick Pic jack sent me today:

http://screencast.com/t/e98jM8HEwn

he is making a killing on markup.. shovel buyers lining up Wink

velvethammer2

member

Activity: 65

Merit: 10

Sick Pic jack sent me today:

http://screencast.com/t/e98jM8HEwn

TheMage

hero member

Activity: 812

Merit: 1000

Litecoin Association Director

Hi everyone

As mentioned in a previous post I was one of the selected folks to receive this item for testing the validity of it. I did the initial set up and gave my thoughts on it about a week ago, you can go here and on pages 6 and 7 are my results as well as comments. https://litecointalk.org/index.php?topic=13314.75

Asiabtc has a lot of work to do on the firmware to get certain things fixed, but I was told these items were fixed as well as the supposed 500kh as show in the secret picture in the initial post. Just to clear some confusion (because I received a few PM's about it over at liteointalk), I have not received the new firmware. I asked earlier today and was told very soon. So maybe by this weekend if I get the new firmware I will post my results over litecointalk.

Thanks all and feel free to let me know if you have any questions

!

worldlybedouin

sr. member

Activity: 376

Merit: 250

Quote from: SheepOnDrugs on February 11, 2014, 06:00:19 PM

Quote from: worldlybedouin on February 11, 2014, 05:01:00 PM

Quote from: TrollboxChamp on February 11, 2014, 04:22:14 PM

CGminer will recognize this device. If you can run CGminer. You can run a gridseed asic!

That is my impression anyway and i think firmware is being made for the raspberry pi.

You have to use the custom version of cpuminer that is provided...ordinary builds of cgminer and the like won't work for these devices. There's also a USB driver which you need to install in order for Windows to correctly detect the device.

Yes, you are correct that users chirale and drfranz are working on a rasberry pi version but it's not ready yet...so you'll have to use the custom CPUminer program provided.

Isn't it working on Linux?

To my knowledge Gridseed has not released the source code for the custom CPUminer software...however, chirale/drfranz's rasberry pi version is linux based...so i don't know if that helps.

bearsworth

sr. member

Activity: 392

Merit: 250

Quote from: TrollboxChamp on February 11, 2014, 03:39:34 PM

Quote from: bearsworth on February 11, 2014, 03:37:08 PM

Quote from: TrollboxChamp on February 11, 2014, 03:29:34 PM

Quote from: bearsworth on February 11, 2014, 03:28:12 PM

is there escrow allowed?

No thats why they sent out samples to well known members. 1000$ worth atleast.

I personally ordered today Cool

Thanks. To do bank transfer, would I do this on the site or pm? Asia btc, get my pm? Thanks.

I think he is sleeping. Ill hook you up with a copy of the PM i got from him. I wouldn't send any funds until you confirm stock obviously. I am under the impression he has plenty though.

Thank you very much.

Topic: LIGHTNINGASIC LA100M,100MHS SCRYPT Miner, USD1999; LA1THS, USD1750.shipped out! - page 128. (Read 309065 times)