Author

Topic: LIGHTNINGASIC LA100M,100MHS SCRYPT Miner, USD1999; LA1THS, USD1750.shipped out! - page 134. (Read 309065 times)

legendary
Activity: 1050
Merit: 1001
So with one single LA5U unit do you need the wiibox controller? Or can you just plug it into a laptop and fire up the software?
legendary
Activity: 1288
Merit: 1004
I thought so but was not sure.
I will ask them if they have anything in the works.
Thanks

Are you also making any firmware updates for the DualMiner?


I would buy one if I can get it working on Raspberry Pi.  Grin
No sky high Electricity bills anymore  Smiley
I wait to know about your experience with this  Smiley


I said that I would buy 1 unit if it works with RPi.   Smiley
if RPI, need to make one firmware for it, give me some time.

Dualminer is a separate company. It is up to them to make new firmware.
hero member
Activity: 630
Merit: 501
Miner Setup And Reviews. WASP Rep.
Are you also making any firmware updates for the DualMiner?


I would buy one if I can get it working on Raspberry Pi.  Grin
No sky high Electricity bills anymore  Smiley
I wait to know about your experience with this  Smiley


I said that I would buy 1 unit if it works with RPi.   Smiley
if RPI, need to make one firmware for it, give me some time.

Dualminer is a separate company. It is up to them to make new firmware.
legendary
Activity: 1288
Merit: 1004
Are you also making any firmware updates for the DualMiner?


I would buy one if I can get it working on Raspberry Pi.  Grin
No sky high Electricity bills anymore  Smiley
I wait to know about your experience with this  Smiley


I said that I would buy 1 unit if it works with RPi.   Smiley
if RPI, need to make one firmware for it, give me some time.
legendary
Activity: 1288
Merit: 1004
Where do you get updated firmware for these and the DualMiners?  I had not heard of any yet for them.
I would love to test it out on my DualMiner if it's available for it.


Just received yesterday some gridseed units from asiabtc everything work well tanks to the great support from him , after a firmware upgrade the units are hashing smooth in LTC mode at 300/350 khs each,i  will try the combo mode in the next hours, i sell few of them for 400$ each or equivalent in  BTC including cables firmware upgrade and help for setting ,buying 5 units i give for free a PSU i'm EU based north Italy locally pickup welcome i prefer to ship inside europe,for any question PM me

sr. member
Activity: 376
Merit: 250
Is it confirmed that these 5 chips do 500KHS with the new firmware?


Not that I've seen.  TheMage (over on litecointalk) is working on getting his hands on it...and will report back to the community.
hero member
Activity: 672
Merit: 500
Is it confirmed that these 5 chips do 500KHS with the new firmware?
full member
Activity: 155
Merit: 100
Ok while testing these units for a few hours with 10 of these I'm only achieving 2.5mh
Using the wiibox upgraded firmware to 1.99 of the controller board.

Updated each cell firmware as well
And running the overclock mode as well.
Any one have any ideas on this

Thanks

I do not own the product yet, so it is hard to say, what is the mistake. Maybe I can help you.

1. Did you try without overclocking?
2. Are you using dual-mode (SHA256 and scrypt)? When yes, are you sure, you have enough power. Max. 5 Miners to 1 Power-Supply! See document "LIGHTAISC LA3M LA6M Scrypt Minder quick setup.pdf" - Page 1.
3. Have you tried separatly to test each miner? Connect just one miner not all! Repeat this for all 10 miners.
4. In case 3 you can take another USB-Hub. Maybe the USB-Hub is corrupt!
5. I'm not sure, but I believe you can directly connect the miner with a computer. Use cgminer.exe from download-link to test separatly each miner WITHOUT USB-HUB. Repeat this for all 10 miners.

With this procedures you can exclude some things!

I hope, it can helps to find the mistake.

Other way is, to send Jack/Asiabtc a PM for more Support.

Please let us know what the problem was.
 
full member
Activity: 216
Merit: 100
Ok while testing these units for a few hours with 10 of these I'm only achieving 2.5mh
Using the wiibox upgraded firmware to 1.99 of the controller board.

Updated each cell firmware as well
And running the overclock mode as well.
Any one have any ideas on this

Thanks
MZD
full member
Activity: 189
Merit: 100
as you bring the photos??

You need a hoster on the web, where you can upload the Pictures and you can use the link in the post.

Here an example, but's german!
Abload.de

Please use www.google.com, www.bing.com or duckduckgo.com for searching a Hosting for Pictures.

EDIT and read this https://bitcointalksearch.org/topic/why-cant-i-upload-my-own-picture-265535

http://postimage.org/

The best.
full member
Activity: 155
Merit: 100
as you bring the photos??

You need a hoster on the web, where you can upload the Pictures and you can use the link in the post.

Here an example, but's german!
Abload.de

Please use www.google.com, www.bing.com or duckduckgo.com for searching a Hosting for Pictures.

EDIT and read this https://bitcointalksearch.org/topic/why-cant-i-upload-my-own-picture-265535
newbie
Activity: 27
Merit: 0
however, I wanted to do see pictures of cg3355 in my possession, I have a story I have 2 kits
member
Activity: 65
Merit: 10

good news. after two days hard work. China time, Feb822:21PM, 200MHS hash ability=700pcs usb cell is  ready.and seperate on monday to  send out. its much stable version.
secret photo. strongly suggested to take a look.
http://puu.sh/6OK99
Yours LightningAsic Team

Very exciting!

 Smiley
newbie
Activity: 27
Merit: 0
as you bring the photos??
full member
Activity: 155
Merit: 100
Sorry guys I wanted you to see some photos but I can not

No Problem. So we can evaluate your post as positive? Is this right?

By the way, your exclamation mark on your Keyboard is hanging! Sorry, it's just a joke.  Grin

newbie
Activity: 27
Merit: 0
Sorry guys I wanted you to see some photos but I can not
full member
Activity: 155
Merit: 100
Jump to: