LIGHTNINGASIC LA100M,100MHS SCRYPT Miner, USD1999; LA1THS, USD1750.shipped out! - page 63.

Blazed

legendary

Activity: 2128

Merit: 1119

Can we buy those PSU cables from you??? I would love to order some for my existing gridseeds

juve4v

hero member

Activity: 505

Merit: 500

Quote from: Andareed on March 17, 2014, 03:01:36 AM

Hardware mod that allows stable higher frequencies: https://bitcointalksearch.org/topic/gridseed-5-chip-usb-miner-voltage-mod-519112

Wait! Don't we already have a cpuminer that is supposed to sw that? Roll Eyes

http://cryptomining-blog.com/1228-download-cpuminer-oc-edition-for-gridseed-5-chip-gc3355-asics

Kapz786

hero member

Activity: 697

Merit: 503

Quote from: sandor111 on March 16, 2014, 01:54:12 PM

Good news everyone! Stable firmware for LightningAsic controllers is underway, it should be ready for public in the coming week and it will be possible to upgrade (from v1, v2, v2.1..) by uploading it to the upload page. The firmware .bin will be released for public, but it is compatible only with LightningAsic controllers. Upgrading from factory Tp-link 703N will not work and it might brick your Tp-link, so don't even try!

It has some awesome features:

Stripped, custom compiled OpenWrt (controller's OS) image optimized for size and speed
Stability is heavily emphasized and guaranteed! No more random reboots or crashes
Custom compiled cpuminer OC, frequency selectable up to 1200 MHz. We have tested it for 48 hours straight at 950 MHz (405 Kh/s) and without hardware errors! (see #1)
Advanced miner monitoring and management
Option to auto power cycle miners when one of the miners is stuck, this is done software wise and it has the same effect as unplugging, and plugging in the USB cable! (see #2)
Up to 10 miners per controller, replacing the 32MB RAM chip with 64MB will double that figure

note #1: depends on miner hardware
note #2: this will only work if the USB/hub is powered by the controller, you must not supply power to the USB hub.

BTC or dual mining is removed in the firmware for a multitude of reasons, BTC mining on GC3355 is unstable and wasteful.

If this doesn't want to make you pull out the LA controller out of the trash, I don't know what will...
For questions or feature requests, please PM me, not Jack. Donations (1AMsjqzXQpRunxUmtn3xzQ5cMdhV7fmet2) are gladly accepted, and will be put towards improving the firmware even more.

Can't wait - Im happy to beta test for you guys if you need. I think everyone else is using a Rasperry Pi at the moment im still on the LightningAsic Controllers lol

Also what do you mean by note #2: Must power USB Hub via Controller - Its a powered hub so the controller will not be able to supply enough power??

Andareed

member

Activity: 84

Merit: 14

Hardware mod that allows stable higher frequencies: https://bitcointalksearch.org/topic/gridseed-5-chip-usb-miner-voltage-mod-519112

clockers25

member

Activity: 118

Merit: 10

Hey guys, anybody ordered from hash-master? Just want to make sure they are legit!!

grendel25

legendary

Activity: 2296

Merit: 1031

Is there something for sale? I went to www.lightningasic.com and it takes my computer 30+ seconds to translate every time I load a new page. Any link to a product page that works with clear pricing and prodcut details? Quite a bit of development has transpired. That much is clear. Any clear concise snapshot of the business and products in the current state would be very much appreciated.

Good luck

asiabtc

legendary

Activity: 986

Merit: 1000

Crypto Currency , Mining, Exchange ATM, Wallet!

Quote from: miaviator on March 16, 2014, 10:37:12 AM

Quote from: AlexeyK on March 16, 2014, 10:27:56 AM

Quote from: miaviator on March 16, 2014, 10:26:15 AM

Quote from: klondike_bar on March 16, 2014, 10:14:21 AM

Quote from: AlexeyK on March 16, 2014, 09:30:54 AM

HI

anybody knows if this real ?

http://www.aliexpress.com/store/product/Gridseed-litecoin-miner-and-bitcoin-miner-520GH-19-2MH-blade-asic-scrypt-miner-for-both-litecoin/1035615_1713358098.html

Blades design for gridseed ?

"This miner has internalized PSU and don’t need any other accessories(of course, a ethernet cable is needed for internet accessing)."

looking at the picture, there is clearly no PSU anywhere in the design, and in fact it appears to have an 8-pin (ATX or PCIE?) power connecter

It looks like an ANT miner... With some parts replaced....

This would be a good design for a blade type gridseed device. If bitmain made it.

don't think that bitmain will do PCB for gridseed . it indeed seems like ANT's blade with GS logo .

But we'd buy them all pretty quick if they did

be careful. its scam.
there is some new models developing. but no so fast.

asiabtc

legendary

Activity: 986

Merit: 1000

Crypto Currency , Mining, Exchange ATM, Wallet!

Quote from: sandor111 on March 16, 2014, 01:54:12 PM

Good news everyone! Stable firmware for LightningAsic controllers is underway, it should be ready for public in the coming week and it will be possible to upgrade (from v1, v2, v2.1..) by uploading it to the upload page. The firmware .bin will be released for public, but it is compatible only with LightningAsic controllers. Upgrading from factory Tp-link 703N will not work and it might brick your Tp-link, so don't even try!

It has some awesome features:

Stripped, custom compiled OpenWrt (controller's OS) image optimized for size and speed
Stability is heavily emphasized and guaranteed! No more random reboots or crashes
Custom compiled cpuminer OC, frequency selectable up to 1200 MHz. We have tested it for 48 hours straight at 950 MHz (405 Kh/s) and without hardware errors! (see #1)
Advanced miner monitoring and management
Option to auto power cycle miners when one of the miners is stuck, this is done software wise and it has the same effect as unplugging, and plugging in the USB cable! (see #2)
Up to 10 miners per controller, replacing the 32MB RAM chip with 64MB will double that figure

note #1: depends on miner hardware
note #2: this will only work if the USB/hub is powered by the controller, you must not supply power to the USB hub.

BTC or dual mining is removed in the firmware for a multitude of reasons, BTC mining on GC3355 is unstable and wasteful.

If this doesn't want to make you pull out the LA controller out of the trash, I don't know what will...
For questions or feature requests, please PM me, not Jack. Donations (1AMsjqzXQpRunxUmtn3xzQ5cMdhV7fmet2) are gladly accepted, and will be put towards improving the firmware even more.

great works of LightningAsic team mebmers.
thanks.

Gazza1

full member

Activity: 238

Merit: 100

I'd rather have the significantly lower power draw and be able to hook up hundreds of these things in scrypt mode than only handfuls in dual mode. Personally.

I know a lot of you guys have high power out there and lucky ones even 240v. My current household I can only spare another 60amps at 120v. That's a lot of scrypt miners. Not much for bitcoin or gpu.

speaking of which and not that it matters, but are these things 240v compliant? just curious.

for those that worry about new algorithms, keep both. keep your current gpus and keep these new scrypt asics too. that way you can mine everything

Xer0

hero member

Activity: 826

Merit: 1000

°^°

Quote from: sandor111 on March 16, 2014, 01:54:12 PM

Good news everyone! Stable firmware for LightningAsic controllers is underway, it should be ready for public in the coming week and it will be possible to upgrade (from v1, v2, v2.1..) by uploading it to the upload page. The firmware .bin will be released for public, but it is compatible only with LightningAsic controllers. Upgrading from factory Tp-link 703N will not work and it might brick your Tp-link, so don't even try!

great work!

but as you compiled cpuminer for wrt/mips,
the step for bulding a wr703n/mr3020 fw is not far away, right?

i could even live with just the binarys and your watchdog script
ar9331 based boards with 64mb ram can be have at 20$ from Ali

chanberg

hero member

Activity: 672

Merit: 500

Quote from: bttalkdim on March 16, 2014, 06:20:52 PM

Why all say BTC mode is not proffitable ?

According to calculators, with Scrypt part I get about $10-$13 per day
BTC - $5 per day (power costs counted)
not

currently I don't want to stop DUAL mining.

because when you dual mine, you get lower scrypt hash rate and its extremely unstable, so you could be disconnecting every 20 minutes

bttalkdim

newbie

Activity: 15

Merit: 0

Why all say BTC mode is not proffitable ?

According to calculators, with Scrypt part I get about $10-$13 per day
BTC - $5 per day (power costs counted)
not

currently I don't want to stop DUAL mining.

sandor111

hero member

Activity: 616

Merit: 500

Quote from: juve4v on March 16, 2014, 02:09:53 PM

Quote from: sandor111 on March 16, 2014, 01:54:12 PM

Good news everyone! Stable firmware for LightningAsic controllers is underway, it should be ready for public in the coming week and it will be possible to upgrade (from v1, v2, v2.1..) by uploading it to the upload page. The firmware .bin will be released for public, but it is compatible only with LightningAsic controllers. Upgrading from factory Tp-link 703N will not work and it might brick your Tp-link, so don't even try!

It has some awesome features:

Stripped, custom compiled OpenWrt (controller's OS) image optimized for size and speed
Stability is heavily emphasized and guaranteed! No more random reboots or crashes
Custom compiled cpuminer OC, frequency selectable up to 1200 MHz. We have tested it for 48 hours straight at 950 MHz (405 Kh/s) and without hardware errors! (see #1)
Advanced miner monitoring and management
Option to auto power cycle miners when one of the miners is stuck, this is done software wise and it has the same effect as unplugging, and plugging in the USB cable! (see #2)
Up to 10 miners per controller, replacing the 32MB RAM chip with 64MB will double that figure

note #1: depends on miner hardware
note #2: this will only work if the USB/hub is powered by the controller, you must not supply power to the USB hub.

BTC or dual mining is removed in the firmware for a multitude of reasons, BTC mining on GC3355 is unstable and wasteful.

If this doesn't want to make you pull out the LA controller out of the trash, I don't know what will...
For questions or feature requests, please PM me, not Jack. Donations (1AMsjqzXQpRunxUmtn3xzQ5cMdhV7fmet2) are gladly accepted, and will be put towards improving the firmware even more.

1.Please don't remove dual mining from the fw or let it be as an option!. Some of us enjoy more or less expensive electricity- and would like to ROI faster.
2. I'm not so sure if 64Mb of RAM will do the trick for 10+ but I would like to see it tested.
3.Back-up pool option is a MUST and I don't see that on your list.
Thanks!

Poor power efficiency is only part of the reason why it is removed, if you want to dual mine stick to the current firmware.
We will be testing with 20+ miners on 64 MB controller, if proven stable, we will confirm this claim
Backup pools will be added

Gazza1

full member

Activity: 238

Merit: 100

how many of these can you hookup to a single rig/pc?

can you use ATX psu?

do you have to use the web interface or can you use cgminer/sgminer?

also how many per controller 10/20?

thanks!

juve4v

hero member

Activity: 505

Merit: 500

Quote from: sandor111 on March 16, 2014, 01:54:12 PM

Good news everyone! Stable firmware for LightningAsic controllers is underway, it should be ready for public in the coming week and it will be possible to upgrade (from v1, v2, v2.1..) by uploading it to the upload page. The firmware .bin will be released for public, but it is compatible only with LightningAsic controllers. Upgrading from factory Tp-link 703N will not work and it might brick your Tp-link, so don't even try!

It has some awesome features:

Stripped, custom compiled OpenWrt (controller's OS) image optimized for size and speed
Stability is heavily emphasized and guaranteed! No more random reboots or crashes
Custom compiled cpuminer OC, frequency selectable up to 1200 MHz. We have tested it for 48 hours straight at 950 MHz (405 Kh/s) and without hardware errors! (see #1)
Advanced miner monitoring and management
Option to auto power cycle miners when one of the miners is stuck, this is done software wise and it has the same effect as unplugging, and plugging in the USB cable! (see #2)
Up to 10 miners per controller, replacing the 32MB RAM chip with 64MB will double that figure

note #1: depends on miner hardware
note #2: this will only work if the USB/hub is powered by the controller, you must not supply power to the USB hub.

BTC or dual mining is removed in the firmware for a multitude of reasons, BTC mining on GC3355 is unstable and wasteful.

If this doesn't want to make you pull out the LA controller out of the trash, I don't know what will...
For questions or feature requests, please PM me, not Jack. Donations (1AMsjqzXQpRunxUmtn3xzQ5cMdhV7fmet2) are gladly accepted, and will be put towards improving the firmware even more.

1.Please don't remove dual mining from the fw or let it be as an option!. Some of us enjoy more or less expensive electricity- and would like to ROI faster.
2. I'm not so sure if 64Mb of RAM will do the trick for 10+ but I would like to see it tested.
3.Back-up pool option is a MUST and I don't see that on your list.
Thanks!

sikke

sr. member

Activity: 504

Merit: 250

Very good job. You got it done.

Reason to order some more from Jack.

mazedk

sr. member

Activity: 457

Merit: 250

Quote from: sandor111 on March 16, 2014, 01:54:12 PM

Good news everyone! Stable firmware for LightningAsic controllers is underway, it should be ready for public in the coming week and it will be possible to upgrade (from v1, v2, v2.1..) by uploading it to the upload page. The firmware .bin will be released for public, but it is compatible only with LightningAsic controllers. Upgrading from factory Tp-link 703N will not work and it might brick your Tp-link, so don't even try!

It has some awesome features:

Stripped, custom compiled OpenWrt (controller's OS) image optimized for size and speed
Stability is heavily emphasized and guaranteed! No more random reboots or crashes
Custom compiled cpuminer OC, frequency selectable up to 1200 MHz. We have tested it for 48 hours straight at 950 MHz (405 Kh/s) and without hardware errors! (see #1)
Advanced miner monitoring and management
Option to auto power cycle miners when one of the miners is stuck, this is done software wise and it has the same effect as unplugging, and plugging in the USB cable! (see #2)
Up to 10 miners per controller, replacing the 32MB RAM chip with 64MB will double that figure

note #1: depends on miner hardware
note #2: this will only work if the USB/hub is powered by the controller, you must not supply power to the USB hub.

BTC or dual mining is removed in the firmware for a multitude of reasons, BTC mining on GC3355 is unstable and wasteful.

If this doesn't want to make you pull out the LA controller out of the trash, I don't know what will...
For questions or feature requests, please PM me, not Jack. Donations (1AMsjqzXQpRunxUmtn3xzQ5cMdhV7fmet2) are gladly accepted, and will be put towards improving the firmware even more.

If thats really true, u'll have a donation from me comming your way for sure

Can you please explain note #2 a little more. The bundle I bought from lightningasic holds a powered USB hub.. So you are saying I will need to unplug the power source? or whats the deal.

sandor111

hero member

Activity: 616

Merit: 500

Good news everyone! Stable firmware for LightningAsic controllers is underway, it should be ready for public in the coming week and it will be possible to upgrade (from v1, v2, v2.1..) by uploading it to the upload page. The firmware .bin will be released for public, but it is compatible only with LightningAsic controllers. Upgrading from factory Tp-link 703N will not work and it might brick your Tp-link, so don't even try!

It has some awesome features:

Stripped, custom compiled OpenWrt (controller's OS) image optimized for size and speed
Stability is heavily emphasized and guaranteed! No more random reboots or crashes
Custom compiled cpuminer OC, frequency selectable up to 1200 MHz. We have tested it for 48 hours straight at 950 MHz (405 Kh/s) and without hardware errors! (see #1)
Advanced miner monitoring and management
Option to auto power cycle miners when one of the miners is stuck, this is done software wise and it has the same effect as unplugging, and plugging in the USB cable! (see #2)
Up to 10 miners per controller, replacing the 32MB RAM chip with 64MB will double that figure

note #1: depends on miner hardware
note #2: this will only work if the USB/hub is powered by the controller, you must not supply power to the USB hub.

BTC or dual mining is removed in the firmware for a multitude of reasons, BTC mining on GC3355 is unstable and wasteful.

If this doesn't want to make you pull out the LA controller out of the trash, I don't know what will...
For questions or feature requests, please PM me, not Jack. Donations (1AMsjqzXQpRunxUmtn3xzQ5cMdhV7fmet2) are gladly accepted, and will be put towards improving the firmware even more.

MZD

full member

Activity: 189

Merit: 100

What is the reasonable life expectancy of these miners? I know the fans would fail first but those are easily replaceable.

miaviator

donator

Activity: 686

Merit: 519

It's for the children!

Quote from: AlexeyK on March 16, 2014, 10:27:56 AM

Quote from: miaviator on March 16, 2014, 10:26:15 AM

Quote from: klondike_bar on March 16, 2014, 10:14:21 AM

Quote from: AlexeyK on March 16, 2014, 09:30:54 AM

HI

anybody knows if this real ?

http://www.aliexpress.com/store/product/Gridseed-litecoin-miner-and-bitcoin-miner-520GH-19-2MH-blade-asic-scrypt-miner-for-both-litecoin/1035615_1713358098.html

Blades design for gridseed ?

"This miner has internalized PSU and don’t need any other accessories(of course, a ethernet cable is needed for internet accessing)."

looking at the picture, there is clearly no PSU anywhere in the design, and in fact it appears to have an 8-pin (ATX or PCIE?) power connecter

It looks like an ANT miner... With some parts replaced....

This would be a good design for a blade type gridseed device. If bitmain made it.

don't think that bitmain will do PCB for gridseed . it indeed seems like ANT's blade with GS logo .

But we'd buy them all pretty quick if they did

Topic: LIGHTNINGASIC LA100M,100MHS SCRYPT Miner, USD1999; LA1THS, USD1750.shipped out! - page 63. (Read 309067 times)