Don't beat yourself up - Having another set of eyes have a look things over works wonders - pretty sure that, at some point, everyone has been blind to some minor issue hiding in plain sight
Topic: lol...it just never ends (Read 283 times)
Good to know you're up and running again.
Don't beat yourself up - Having another set of eyes have a look things over works wonders - pretty sure that, at some point, everyone has been blind to some minor issue hiding in plain sight
Don't beat yourself up - Having another set of eyes have a look things over works wonders - pretty sure that, at some point, everyone has been blind to some minor issue hiding in plain sight
that hooked up, took it a while to finish up its database as it has not synced in a year or so
totally embarrassing, a little bit of dyslexia goes a long way in computers...
To rub salt in the wound, I had somehow managed to save armoryqt.conf.txt which of course didn't work.
I'm going to go sit in the corner with the duncecap on now.
totally embarrassing, a little bit of dyslexia goes a long way in computers...
To rub salt in the wound, I had somehow managed to save armoryqt.conf.txt which of course didn't work.
I'm going to go sit in the corner with the duncecap on now.
oh god...the shame
the pathing SHOULD BE "G:\Program Files (x86)\Armory\ArmoryQt.exe" -- satoshi-datadir="G:\Blockchain\blocks" --datadir="G:\armory" or the syntactical varient for the entry method
armorylog entering args with shortcut https://pastebin.com/WRJeHmRi
I apologize in advance, history would suggest that I am missing something embarrassingly boneheaded and obvious.
There is a space between -- and satoshi above, and in your logs for the shortcut version. armorylog entering args with shortcut https://pastebin.com/WRJeHmRi
I apologize in advance, history would suggest that I am missing something embarrassingly boneheaded and obvious.
OK, first off, thanks for bearing with me folks. It seems like I made nearly every possible mistake in that last process. I am assimilating information though, and feel like that filled in some rather glaring gaps in my understanding.
So the other box, this one is really odd. It used to work, it has probably been almost a year now though. As I recall I was making some hardware changes and moving drives around and it never worked again. I have battered myself against it multiple times, to the point of complete uninstall/reinstall cycles only to eventually give up in despair.
The behavior is that it refuses to recognize custom pathing args. It just seems to ignore them. It does not matter if they are entered under the file/settings/general/let Armory...dialog, as a shortcut arg or in a .conf file (I tried last night after getting that straight).
Win7pro 64
Core 0.15.1
RC3
armorylog entering args with armoryqt.conf https://pastebin.com/6KAhxf6U
the pathing SHOULD BE "G:\Program Files (x86)\Armory\ArmoryQt.exe" -- satoshi-datadir="G:\Blockchain\blocks" --datadir="G:\armory" or the syntactical varient for the entry method
armorylog entering args with shortcut https://pastebin.com/WRJeHmRi
I apologize in advance, history would suggest that I am missing something embarrassingly boneheaded and obvious.
So the other box, this one is really odd. It used to work, it has probably been almost a year now though. As I recall I was making some hardware changes and moving drives around and it never worked again. I have battered myself against it multiple times, to the point of complete uninstall/reinstall cycles only to eventually give up in despair.
The behavior is that it refuses to recognize custom pathing args. It just seems to ignore them. It does not matter if they are entered under the file/settings/general/let Armory...dialog, as a shortcut arg or in a .conf file (I tried last night after getting that straight).
Win7pro 64
Core 0.15.1
RC3
armorylog entering args with armoryqt.conf https://pastebin.com/6KAhxf6U
the pathing SHOULD BE "G:\Program Files (x86)\Armory\ArmoryQt.exe" -- satoshi-datadir="G:\Blockchain\blocks" --datadir="G:\armory" or the syntactical varient for the entry method
armorylog entering args with shortcut https://pastebin.com/WRJeHmRi
I apologize in advance, history would suggest that I am missing something embarrassingly boneheaded and obvious.
These are lines for the node, i.e. they into bitcoin.conf.
got it
thank you
tomorrow we can dive into the other box that steadfastly refuses to path
These are lines for the node, i.e. they go into bitcoin.conf.
ahhhhhh, ok, to the C drive I go, thanks Holliday
hmmm
guess I should try one thing at a time...lol
took those lines out and it worked
hmmm
Quote
ArmoryQt.exe: error: no such option: --addnode
ArmoryQt.exe: error: no such option: --listen
ArmoryQt.exe: error: no such option: --listen
guess I should try one thing at a time...lol
took those lines out and it worked
ok
my armory data directory is custom, D:\armory
just help me understand, if I throw the config file in there, and then launch Armory with an unmodified shortcut...how would it even know where to look?
my armory data directory is custom, D:\armory
just help me understand, if I throw the config file in there, and then launch Armory with an unmodified shortcut...how would it even know where to look?
The config file is placed in the default Armory folder. When Armory starts, it reads the config file and uses any custom directories you've included there. This is also how Bitcoin Core works.
ok
my armory data directory is custom, D:\armory
just help me understand, if I throw the config file in there, and then launch Armory with an unmodified shortcut...how would it even know where to look?
my armory data directory is custom, D:\armory
just help me understand, if I throw the config file in there, and then launch Armory with an unmodified shortcut...how would it even know where to look?
I am assuming it/they go in the \Armory folder with the executables. Goatpig mentioned armorydb.conf, is there also an armory.conf?
Is the syntax the same as the shortcut args?
Armory data directory usually (C:\Users\stg\AppData\Roaming\Armory\). armoryqt.conf is the main one and you probably won't need the armorydb.conf if you're launching the db from Armory's GUI.Is the syntax the same as the shortcut args?
Same syntax, but no leading dashes: satoshi-datadir= not --satoshi-datadir=
If you can, also do a SMART scan or whatever. Not sure what does it on Windows but I'm sure there are a million programs that can check the health of your hard drive. If it's failing, grab a new one (or an SSD if you can afford it), back up what you can, and swap the drives out.
Yeah, I actually have a NVMe setup ready to go in this one as the boot drive which will bump its current SSD boot drive down the totem pole
Quote
Do you use an antivirus? If so, check the quarantine container.
I just run MBAM every so often, have my browser locked down pretty hard, and don't click on random shit...so the mystery on that remains
So, everything is running fine with the reinstall, it picked up its old DB seamlessly, which was nice, let's get me up to speed on the config file stuff.
I am assuming it/they go in the \Armory folder with the executables. Goatpig mentioned armorydb.conf, is there also an armory.conf?
Is the syntax the same as the shortcut args?
Do you use an antivirus? If so, check the quarantine container.
If you can, also do a SMART scan or whatever. Not sure what does it on Windows but I'm sure there are a million programs that can check the health of your hard drive. If it's failing, grab a new one (or an SSD if you can afford it), back up what you can, and swap the drives out.
yeah, definitely on alert for hardware issues now, comparing the \Armory folder with the other box it looks like I am missing 4 files, and they are not in the bin so not a fat finger or cat on kbd thing...
I think I will do a reinstall and keep an eye on things.
I think I will do a reinstall and keep an eye on things.
Upon closer inspection, I am not seeing ArmoryDB.exe anywhere...starting to wonder if I have an impending drive issue
You mean ArmoryDB can't be found where Armory is installed? (I assume it's in that location. I've never installed Armory on my Windows VM.) If so, then yeah, that's weird. Are you having other issues with your system? I ask because I just had a drive fail on me on my NAS, along with one of the slots dying. :/ Was able to recover the data on the dying drive and swap in a fresh drive - haven't tried swapping out on the drive from the dead bay - but drives can go bad quickly if you're not on top of things.
I understand your point but this is something you can investigate later, once you have a functional system. For now, since you are requesting assistance, you need to follow the instructions you are given, which allows for controlling the environment.
fair enough
but first
Quote
You have to cd to the folder containing ArmoryDB.exe to run it from the command line (or type in the full binary path). At any rate, delete dbLog.txt, setup your armorydb.conf and go run the DB from the command line.
Upon closer inspection, I am not seeing ArmoryDB.exe anywhere...starting to wonder if I have an impending drive issue
Win7/64, Armory0.96.3
That got me confused.
Quote
OK goatpig, I will figure out the config file syntax and location, I promise, and wean myself off of shortcut args, but it was working fine until the other day and I want to understand
I understand your point but this is something you can investigate later, once you have a functional system. For now, since you are requesting assistance, you need to follow the instructions you are given, which allows for controlling the environment.
Quote
ArmoryDB.exe --satoshi-datadir="E:\BCashChain\blocks" --datadir="D:\armory" --dbdir="D:\armory\databases"
'ArmoryDB.exe' is not recognized as an internal or external command, operable program or batch file.
'ArmoryDB.exe' is not recognized as an internal or external command, operable program or batch file.
You have to cd to the folder containing ArmoryDB.exe to run it from the command line (or type in the full binary path). At any rate, delete dbLog.txt, setup your armorydb.conf and go run the DB from the command line.
Which version of ABC are you using? I seem to recall something about 0.16.1 working but 0.16.2 not working. There could be other timebombs in the code, changes to the network, etc. Have there been any recent changes in the Bcash network that you're aware of?
0.16.1, this was, in fact, the golden spike that got my BCH setup finally working in the other thread. No timebombs that I know of, but I don't really follow Vercoin developments so it is possible. Still, wouldn't the DB spawn but then ack?
Quote
As for asking about ArmoryDB, I asked because a previously running instance of ArmoryDB would prevent spawning. If you've checked the task manager and ArmoryDB just never runs, then yeah, that's a problem of some sort. I just wanted to confirm.
Yeah, I understand about killing DB, that was the first thing I checked.
Which version of ABC are you using? I seem to recall something about 0.16.1 working but 0.16.2 not working. There could be other timebombs in the code, changes to the network, etc. Have there been any recent changes in the Bcash network that you're aware of?
As for asking about ArmoryDB, I asked because a previously running instance of ArmoryDB would prevent spawning. If you've checked the task manager and ArmoryDB just never runs, then yeah, that's a problem of some sort. I just wanted to confirm.
As for asking about ArmoryDB, I asked because a previously running instance of ArmoryDB would prevent spawning. If you've checked the task manager and ArmoryDB just never runs, then yeah, that's a problem of some sort. I just wanted to confirm.
Jump to: