lolMiner 1.64: Fastest Kaspa miner in market - page 116.

R00d

newbie

Activity: 13

Merit: 0

Quote from: ronnieb on January 23, 2019, 03:06:12 PM

Quote from: R00d on January 23, 2019, 02:07:21 PM

Quote from: Elwood39 on January 22, 2019, 09:11:35 PM

Quote from: Dripac on January 22, 2019, 02:19:16 PM

Any setup for 580 8gb and voltage setup?

Have you found any good settings with afterburner on the Rx580 or tried a different display driver versions?

for the RX480 8GB I use settings are as follows:

AMD Driver 18.6.1

Global wattman:
Core 1300
Memory 2100
power limit -15%

Afterburner:
custom fan curve to equal 6200rpms as 18.6.1 global wattman only goes to 5200rpms

Friends RX480 8gb can clock 2200 memory, takes sols over 30. some cards are luckier than others,...

for beam?

dont mine beam. Those are the settings for all algos I mine, equi, ethash, crypto/lite/heavy. if I did mine Beam those would be the settings unless card became too hot, then id reduce power limit by 5% until stable.

ronnieb

jr. member

Activity: 199

Merit: 1

Quote from: R00d on January 23, 2019, 02:07:21 PM

Quote from: Elwood39 on January 22, 2019, 09:11:35 PM

Quote from: Dripac on January 22, 2019, 02:19:16 PM

Any setup for 580 8gb and voltage setup?

Have you found any good settings with afterburner on the Rx580 or tried a different display driver versions?

for the RX480 8GB I use settings are as follows:

AMD Driver 18.6.1

Global wattman:
Core 1300
Memory 2100
power limit -15%

Afterburner:
custom fan curve to equal 6200rpms as 18.6.1 global wattman only goes to 5200rpms

Friends RX480 8gb can clock 2200 memory, takes sols over 30. some cards are luckier than others,...

for beam?

R00d

newbie

Activity: 13

Merit: 0

Quote from: Elwood39 on January 22, 2019, 09:11:35 PM

Quote from: Dripac on January 22, 2019, 02:19:16 PM

Any setup for 580 8gb and voltage setup?

Have you found any good settings with afterburner on the Rx580 or tried a different display driver versions?

for the RX480 8GB I use settings are as follows:

AMD Driver 18.6.1

Global wattman:
Core 1300
Memory 2100
power limit -15%

Afterburner:
custom fan curve to equal 6200rpms as 18.6.1 global wattman only goes to 5200rpms

Friends RX480 8gb can clock 2200 memory, takes sols over 30. some cards are luckier than others,...

jabujax

newbie

Activity: 31

Merit: 0

Quote from: gerixusyu on January 22, 2019, 04:40:05 PM

Quote from: cmarius05 on January 22, 2019, 02:43:40 PM

Do you have any ideea why in a rig of 5 rx 570 4gb gpu, identical bios and settings 4 mines at 9-10sol and 1 mines at 0-2 sol ?

set lower clock's on all cards, set 1170/2000 gpu/memmory

My cards rx480 4gb
i set lower all gpu memory my power consuption lower too, its good but in hash nothing change again making 1 sol for 1 card. Others are good 8-10 sol.

Dripac

newbie

Activity: 71

Merit: 0

1250/1800 930/930mv 12sol/s

Elwood39

newbie

Activity: 1

Merit: 0

Quote from: Dripac on January 22, 2019, 02:19:16 PM

Any setup for 580 8gb and voltage setup?

Have you found any good settings with afterburner on the Rx580 or tried a different display driver versions?

sylabis

newbie

Activity: 42

Merit: 0

Is it possible to make a solver for Equihash150/5 so that you can mine on 2gb GPUs?

R00d

newbie

Activity: 13

Merit: 0

i apologise. it appears it is an issue with the official zelcash pool. coinblockers works absolutely fine.

Elder III

sr. member

Activity: 1246

Merit: 274

Quote from: R00d on January 22, 2019, 05:22:33 PM

Please, for the love of all things, let us run lolminer with a bat file. the whole config process is totally unnecessary. Took 1 minute to set up bat file yet it does not work all shares are not accepted.
rx480

lolMiner --coin AUTO144_5 --pool stratum.zel.cash --port 2001 --user address.user --pass x
pause

^^ that should be all that is required from a user like most miners, if not all.

You can edit the config file with Notepad just as fast and as easily as a .bat file.

R00d

newbie

Activity: 13

Merit: 0

Please, for the love of all things, let us run lolminer with a bat file. the whole config process is totally unnecessary. Took 1 minute to set up bat file yet it does not work all shares are not accepted.
rx480

https://i.ibb.co/jJLp4Tq/rx480.jpg

lolMiner --coin AUTO144_5 --pool stratum.zel.cash --port 2001 --user address.user --pass x
pause

^^ that should be all that is required from a user like most miners, if not all.

gerixusyu

newbie

Activity: 24

Merit: 0

Quote from: cmarius05 on January 22, 2019, 02:43:40 PM

Do you have any ideea why in a rig of 5 rx 570 4gb gpu, identical bios and settings 4 mines at 9-10sol and 1 mines at 0-2 sol ?

set lower clock's on all cards, set 1170/2000 gpu/memmory

cmarius05

newbie

Activity: 1

Merit: 0

Do you have any ideea why in a rig of 5 rx 570 4gb gpu, identical bios and settings 4 mines at 9-10sol and 1 mines at 0-2 sol ?

Dripac

newbie

Activity: 71

Merit: 0

Any setup for 580 8gb and voltage setup?

nordmann666

member

Activity: 363

Merit: 16

Quote from: gerixusyu on January 22, 2019, 01:48:48 PM

hello folks, can sombedoy explain me , my 4 rigs with RX580 8gb ,give 10-11 sol/s , no matther how clocks is, when set to 1126 gpu / 1900 memmory same hashrate when set clocks to 1200 gpu / 2150 memmory, thank's.

much more core relevant algo...so mem speed doesnt matter that much like it would on CN

gerixusyu

newbie

Activity: 24

Merit: 0

hello folks, can sombedoy explain me , my 4 rigs with RX580 8gb ,give 10-11 sol/s , no matther how clocks is, when set to 1126 gpu / 1900 memmory same hashrate when set clocks to 1200 gpu / 2150 memmory, thank's.

JoMan

newbie

Activity: 5

Merit: 0

All fine now. Thanks once again !

Cdlsports

newbie

Activity: 18

Merit: 0

Trying to mine on smos. Keep getting this issue. Any help?

Build log :
Connecting to pool...
Warning : resolve : host not found (authoritative)
/root /xminer.sh:line 103: 10664 segmentation fault$ miner_path$miner_options
Miner ended or crashed. Restarting

WhyMe

sr. member

Activity: 661

Merit: 250

Pool failover doesn't work when using command line only ? It seems to take only last pool specified by --pool

EDIT : my bad, just seen that :/
In command line the entries --pool, --port, --user and --pass may be vectors where the entries are separated by semicolons

trid

sr. member

Activity: 425

Merit: 250