Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 82. (Read 155842 times)
Hey thanks for the reply. New to this. How do I go about doing it? My 1 machine with 5700xt runs fine. The other mining rig crashes constantly. Not sure how to lower power.
LOLMiner is crashing my mining rig after mining BEAM for awhile. This is with 5 5500xt and a 5600xt. No overclock. Any ideas? Can mine other coins with no problems.
TRY LOWERING YOUR POWER--
Whatever you use to tune your GPUs, lower the power input. Lolliedieb increased the hash, but the power usage also increased. --scryptr
LOLMiner is crashing my mining rig after mining BEAM for awhile. This is with 5 5500xt and a 5600xt. No overclock. Any ideas? Can mine other coins with no problems.
1.05 Thanks for impove Fiji 
WHAT ARE THE FIJI HASH RATES? --
I have several old Fury cards gathering dust. Please relate how well these cards hash for Beam III. --scryptr
19-21 sol/s as R9 Fury NANO
and I have write as this https://bitcointalksearch.org/topic/m.53162370
THANK YOU! --
Really some good information in your Fury thread. I may revive my Fury cards... --scryptr
It is pretty good at beam III, it can really hit 20 sols, revive it.. knowing 1080ti are just around 27 sols hehe
1.05 Thanks for impove Fiji
WHAT ARE THE FIJI HASH RATES? --
I have several old Fury cards gathering dust. Please relate how well these cards hash for Beam III. --scryptr
19-21 sol/s as R9 Fury NANO
and I have write as this https://bitcointalksearch.org/topic/m.53162370
THANK YOU! --
Really some good information in your Fury thread. I may revive my Fury cards... --scryptr
1.05 Thanks for impove Fiji
WHAT ARE THE FIJI HASH RATES? --
I have several old Fury cards gathering dust. Please relate how well these cards hash for Beam III. --scryptr
19-21 sol/s as R9 Fury NANO
and I have write as this https://bitcointalksearch.org/topic/m.53162370
1.05 Thanks for impove Fiji
WHAT ARE THE FIJI HASH RATES? --
I have several old Fury cards gathering dust. Please relate how well these cards hash for Beam III. --scryptr
18-19 sols
1.05 Thanks for impove Fiji
WHAT ARE THE FIJI HASH RATES? --
I have several old Fury cards gathering dust. Please relate how well these cards hash for Beam III. --scryptr
1.05 Thanks for impove Fiji
So we have no AMD miner for GRIN fork ?
I am very sorry about this, but on C29M I just did not have enough users to justify putting much time (and all the cuckoos need a lot) into a new solver. It was not the worst algo I made, but as said ... the ratio between time spend and roi did not fit.
There may be a rework on C32 later this quarter of the year though.
But today lets say hello to lolMiner 1.05
You can download it here.
The change log:
- Improved performance of Beam Hash III for all supported 4G and higher cards by 4-8% depending on model
- Added highly experimental support (untested) for Beam Hash III on blockchain drivers for Polaris 10, Fiji and Hawaii GPUs
- Added highly experimental support (untested) for Beam Hash III on Kepler (SM 3.2 and higher) GPUs, Requires CUDA 9+.
- Windows: Added more search locations for NVML library
- Fixed bug: Mining Cuckarood-29 not starting up
- Fixed bug: Mining on Nvidia GPUs crashed after few seconds when NVML library was not found
- Fixed bug: Mining Beam Hash III on some 8G cards did not start up (tried to allocate more memory in one buffered then allowed on some OS)
the new algo BEAM works great in the new version, thank you
I'm unable to generate a log file using --log 1 --logfile log.txt
Am i doing something wrong?
Am i doing something wrong?
So we have no AMD miner for GRIN fork ?
Not for Cuckarooz29, but it works mighty fine for Cuckatoo32...
So we have no AMD miner for GRIN fork ?
So ... very busily spinning last days to make lolMiner 1.03
reality as quickly as possible.
You can download it here.
This time on board (change-log):
So overall expect the miner to be more performant now on Beam Hash III - and the crashed the miner had last versions on startup when the API was active should now be history. Happy mining!
reality as quickly as possible.
You can download it here.
This time on board (change-log):
- New Beam Hash III 4G solver, replaces the 6G solver on AMD Vega GPUs and earlier (+5 - 8% performance on RX 580 & Vega GPUs)
- New Beam Hash III 6G solver on ROCm and for AMD Navi GPUs (+8-10% performance on Navi cards)
- Fixed a bug with the API (--apiport) crashing the miner in Windows on startup
So overall expect the miner to be more performant now on Beam Hash III - and the crashed the miner had last versions on startup when the API was active should now be history. Happy mining!
all my rigs now work! no more crashes like in my previous post. Awesome!
Before = 1.02?
I mean did BeamHash III work with 1.02?
May I ask which driver you use? lolMiner has Fiji builds for every driver released in 2018-2020.
I mean did BeamHash III work with 1.02?
May I ask which driver you use? lolMiner has Fiji builds for every driver released in 2018-2020.
I mean others algos on older versions(beam,grimm,grin e.t.c). Driver Crimson-ReLive-Beta-Blockchain-Workloads-Aug23(2018), Not a single algorithm in two years had problems with this driver on this GPUs, has not changed them since then, they are the best for my think, moreover, it shows even slightly better results on some algo than new adrenaline(at least on this gpu). 1.02 works with this driver on more algos but without beam and cortex(ITS VERY BAD!) . And second problem what your miner not have client.reconnect(for MRR for example, any other miner not have this problem) and its a very bad too! Please fix this two problems!
Fiji - Win 10, Driver AMD 20.5.1
AB is the same OC
Ver 1.02 get 16 sol/s
ver 1.03 get 11.4 sol/s
Cannot find OC setting for increase hashrate on 1.03, ver 1.02 is better for Fiji.
AB is the same OC
Ver 1.02 get 16 sol/s
ver 1.03 get 11.4 sol/s
Cannot find OC setting for increase hashrate on 1.03, ver 1.02 is better for Fiji.
Before = 1.02?
I mean did BeamHash III work with 1.02?
May I ask which driver you use? lolMiner has Fiji builds for every driver released in 2018-2020.
I mean did BeamHash III work with 1.02?
May I ask which driver you use? lolMiner has Fiji builds for every driver released in 2018-2020.
So ... very busily spinning last days to make lolMiner 1.03
reality as quickly as possible.
You can download it here.
This time on board (change-log):
So overall expect the miner to be more performant now on Beam Hash III - and the crashed the miner had last versions on startup when the API was active should now be history. Happy mining!
reality as quickly as possible.
You can download it here.
This time on board (change-log):
- New Beam Hash III 4G solver, replaces the 6G solver on AMD Vega GPUs and earlier (+5 - 8% performance on RX 580 & Vega GPUs)
- New Beam Hash III 6G solver on ROCm and for AMD Navi GPUs (+8-10% performance on Navi cards)
- Fixed a bug with the API (--apiport) crashing the miner in Windows on startup
So overall expect the miner to be more performant now on Beam Hash III - and the crashed the miner had last versions on startup when the API was active should now be history. Happy mining!
Hi! Not working BEAM 3 for Fiji(fury): "Active: false (Unsupported device or driver version.).............All devices deselected or failed compatiblity check. Closing lolMiner"
Before your miner works VERY FINE with all another algos! What wrong?
So ... very busily spinning last days to make lolMiner 1.03
reality as quickly as possible.
You can download it here.
This time on board (change-log):
So overall expect the miner to be more performant now on Beam Hash III - and the crashed the miner had last versions on startup when the API was active should now be history. Happy mining!
reality as quickly as possible.
You can download it here.
This time on board (change-log):
- New Beam Hash III 4G solver, replaces the 6G solver on AMD Vega GPUs and earlier (+5 - 8% performance on RX 580 & Vega GPUs)
- New Beam Hash III 6G solver on ROCm and for AMD Navi GPUs (+8-10% performance on Navi cards)
- Fixed a bug with the API (--apiport) crashing the miner in Windows on startup
So overall expect the miner to be more performant now on Beam Hash III - and the crashed the miner had last versions on startup when the API was active should now be history. Happy mining!
Jump to: