Topic: LUXCoin — PHI1612 PoW/PoS Hybrid — new topic in last page - page 69. (Read 147107 times)
thanks
This has been answered multiple times here and on Discord.
1. we will not stake our coins.
2. we will not dump our coins.
3. we will have only 1 MN for stabilizing the network
1. we will not stake our coins.
2. we will not dump our coins.
3. we will have only 1 MN for stabilizing the network
what are your intentions with these premined 3M coins concerning competing for POS block rewards?
Power limit ?
Core Clock ?
Memery Clock ?
tpruvot pushed some nice optimizations in the latest ccminer, directly benefiting Maxwell (but not only) architecture (AES final + streebog).
So you should be able to see improvement for PHI1612 and X11-Gost.
3 days ago? So you should be able to see improvement for PHI1612 and X11-Gost.
1080 ti oc zotec ?
set ?
set ?
Thanks, we already announced this on Discord.
We use it more often because it's easier to stay in touch with the community.
We will be making a few announcements here over the next week regarding future plans, a roadmap, whitepaper, and more.
We use it more often because it's easier to stay in touch with the community.
We will be making a few announcements here over the next week regarding future plans, a roadmap, whitepaper, and more.
There is no way 1070 does only 13 Mh/s, I get almost 14 with 1060.
Make sure you have the latest ccminer version, it was greatly improved since my initial release.
Make sure you have the latest ccminer version, it was greatly improved since my initial release.
I know that all developers might be very tired for preparation of the successful launch. It would be highly appreciated. Please keep up your good work.
Additionally, the most important factor which can make a coin succeeded or not is the roadmap. It's truly good for both short- and long-term aspect, good for both miners and investors.
As a result of that, please consider very carefully about the roadmap, publish it to our community.
Thank you again, devs. Have a nice day!
tpruvot pushed some nice optimizations in the latest ccminer, directly benefiting Maxwell (but not only) architecture (AES final + streebog).
So you should be able to see improvement for PHI1612 and X11-Gost.
So you should be able to see improvement for PHI1612 and X11-Gost.
Interesting. Seems the Algo likes older Nvidia cards also. My Maxwell 980TI is doing around 20,5 MH. I can underclock my memory without decrease of hashrate.
30mh/s 1080ti 65% Power +200 Core +400 Mem
There is no way 1070 does only 13 Mh/s, I get almost 14 with 1060.
Make sure you have the latest ccminer version, it was greatly improved since my initial release.
Make sure you have the latest ccminer version, it was greatly improved since my initial release.
when the memory decreases, the hash decreases, gpu clock 1370 mem ciock 2130, intensity 21, rx 580, 15mh / s card is normal?
I've seen Discord posts claiming numbers in the 14-17 Mh/s range for the 580.
Depends on a lot of factors, as I said earlier, and on timings also.
Maybe start with ~1300 core / 2030 mem and 20 intensity and tweak from there.
this mean that the 1070 is underperforming because it's only 13MH and should be 20 right? there is someone working on a faster nvidia miner for this algo?
4x rx 560 1150 2000 290watt 24mh/s 
2x rx 580 1366/2150 ~ 29,5mh/s, don't know how much power is used
4x rx 560 1150 2000 290watt 24mh/s
when the memory decreases, the hash decreases, gpu clock 1370 mem ciock 2130, intensity 21, rx 580, 15mh / s card is normal?
I've seen Discord posts claiming numbers in the 14-17 Mh/s range for the 580.
Depends on a lot of factors, as I said earlier, and on timings also.
Maybe start with ~1300 core / 2030 mem and 20 intensity and tweak from there.
anyone can help me please i already add nodes \AppData\Roaming\Lux in lux.conf;
server=1
listen=1
daemon=1
rpcuser=phi
rpcpassword=xx
rpcport=6667
rpcallowip=127.0.0.1
addnode=45.63.25.110
addnode=45.32.245.217
addnode=109.72.52.94:28666
addnode=114.162.212.69:28666
addnode=166.62.157.98:28666
addnode=178.75.12.107:28666
addnode=188.242.167.97:28666
addnode=217.76.187.239:28666
addnode=37.112.13.249:28666
addnode=45.32.245.45:28666
addnode=45.63.25.110:28666
addnode=46.28.98.8:28666
addnode=49.149.79.191:28666
addnode=5.189.85.95:28666
addnode=72.89.43.245:28666
addnode=83.249.26.170:28666
addnode=87.225.108.117:28666
addnode=88.119.28.126:28666
addnode=95.174.205.229:28666
i've active connections but wallet still not synchronize
When you are making lux.conf save it as "All files", not as text file. server=1
listen=1
daemon=1
rpcuser=phi
rpcpassword=xx
rpcport=6667
rpcallowip=127.0.0.1
addnode=45.63.25.110
addnode=45.32.245.217
addnode=109.72.52.94:28666
addnode=114.162.212.69:28666
addnode=166.62.157.98:28666
addnode=178.75.12.107:28666
addnode=188.242.167.97:28666
addnode=217.76.187.239:28666
addnode=37.112.13.249:28666
addnode=45.32.245.45:28666
addnode=45.63.25.110:28666
addnode=46.28.98.8:28666
addnode=49.149.79.191:28666
addnode=5.189.85.95:28666
addnode=72.89.43.245:28666
addnode=83.249.26.170:28666
addnode=87.225.108.117:28666
addnode=88.119.28.126:28666
addnode=95.174.205.229:28666
i've active connections but wallet still not synchronize
When coin going to exchange? I see miners running out from this coin.
Jump to: