Changes
- Fixed linking of libusb with CGMiner
- Fixed linking of libevent with BFGMiner
- Added SGMiner-NH 5.6.1
- Added SGMiner-Pascal 5.5.0
Topic: Mac OS X Resources & Howtos for Mining (Homebrew/DIY/Bin/Xcode Debugging) (Read 64259 times)
February 02, 2018, 09:50:36 PM
Shell scripts and precompiled binaries have been updated to reflect the following:
Changes
Changes
January 13, 2018, 10:39:36 PM
Homebrew formulas, Shell scripts, and precompiled binaries have been updated to reflect the following:
Changes
Changes
- Added SGMiner-GM 5.5.5
- Updated BFGMiner to 5.5
- Updated CGMiner to 4.10
- Updated SGMiner to 5.1.1
- Updated libusb to 1.0.21
- Updated curl to 7.57.0
- Updated jansson to 2.10
- Updated libmicrohttpd to 0.9.58
- Updated libevent to 2.1.8
- Updated uthash to 2.0.2
January 13, 2018, 08:28:39 PM
Hi Guys,
I was installing BFGMiner 5.2.0 on Mac OS - Yosemite, upgrading from v 5.1 with Homebrew and down at the last a few steps, I got this error - any ideas?
===
Terrances-iMac:~ citronick$ brew install bfgminer
Error: Formulae found in multiple taps:
* nwoolls/cryptocoin/bfgminer
* nwoolls/xgminer/bfgminer
Please use the fully-qualified name e.g. nwoolls/cryptocoin/bfgminer to refer the formula.
Terrances-iMac:~ citronick$ brew install nwoolls/cryptocoin/bfgminer
==> Installing bfgminer from nwoolls/homebrew-cryptocoin
Error: Formulae found in multiple taps:
* nwoolls/cryptocoin/uthash
* nwoolls/xgminer/uthash
Please use the fully-qualified name e.g. nwoolls/cryptocoin/uthash to refer the formula.
===
Tried a few times but no luck - any ideas?
TMT
I was installing BFGMiner 5.2.0 on Mac OS - Yosemite, upgrading from v 5.1 with Homebrew and down at the last a few steps, I got this error - any ideas?
===
Terrances-iMac:~ citronick$ brew install bfgminer
Error: Formulae found in multiple taps:
* nwoolls/cryptocoin/bfgminer
* nwoolls/xgminer/bfgminer
Please use the fully-qualified name e.g. nwoolls/cryptocoin/bfgminer to refer the formula.
Terrances-iMac:~ citronick$ brew install nwoolls/cryptocoin/bfgminer
==> Installing bfgminer from nwoolls/homebrew-cryptocoin
Error: Formulae found in multiple taps:
* nwoolls/cryptocoin/uthash
* nwoolls/xgminer/uthash
Please use the fully-qualified name e.g. nwoolls/cryptocoin/uthash to refer the formula.
===
Tried a few times but no luck - any ideas?
TMT
Code:
brew tap nwoolls/xgminer
brew install bfgminer
For more info please refer to the instructions at:
August 16, 2015, 09:38:04 AM
Hi Guys,
I was installing BFGMiner 5.2.0 on Mac OS - Yosemite, upgrading from v 5.1 with Homebrew and down at the last a few steps, I got this error - any ideas?
===
Terrances-iMac:~ citronick$ brew install bfgminer
Error: Formulae found in multiple taps:
* nwoolls/cryptocoin/bfgminer
* nwoolls/xgminer/bfgminer
Please use the fully-qualified name e.g. nwoolls/cryptocoin/bfgminer to refer the formula.
Terrances-iMac:~ citronick$ brew install nwoolls/cryptocoin/bfgminer
==> Installing bfgminer from nwoolls/homebrew-cryptocoin
Error: Formulae found in multiple taps:
* nwoolls/cryptocoin/uthash
* nwoolls/xgminer/uthash
Please use the fully-qualified name e.g. nwoolls/cryptocoin/uthash to refer the formula.
===
Tried a few times but no luck - any ideas?
TMT
I was installing BFGMiner 5.2.0 on Mac OS - Yosemite, upgrading from v 5.1 with Homebrew and down at the last a few steps, I got this error - any ideas?
===
Terrances-iMac:~ citronick$ brew install bfgminer
Error: Formulae found in multiple taps:
* nwoolls/cryptocoin/bfgminer
* nwoolls/xgminer/bfgminer
Please use the fully-qualified name e.g. nwoolls/cryptocoin/bfgminer to refer the formula.
Terrances-iMac:~ citronick$ brew install nwoolls/cryptocoin/bfgminer
==> Installing bfgminer from nwoolls/homebrew-cryptocoin
Error: Formulae found in multiple taps:
* nwoolls/cryptocoin/uthash
* nwoolls/xgminer/uthash
Please use the fully-qualified name e.g. nwoolls/cryptocoin/uthash to refer the formula.
===
Tried a few times but no luck - any ideas?
TMT
March 20, 2015, 11:50:29 AM
Homebrew formulas, Shell scripts, and precompiled binaries have all been updated with BFGMiner 5.1, CGMiner 4.9.1 and SGMiner 5.1.
February 21, 2015, 12:40:23 AM
I've been unable to get the New R-Box running on Mac OS 10.9.5. I made a [still in the queue since Nov 2014] comment on nwoolls' blog about this, but since the comment was never approved, nobody has been able to see it. 
I have two New R-Boxes and they run fine in VMWare Fusion running Win2000. I'd like to not have the overhead of always running VMWare Fusion though. I've made certain any and all USB drivers have been removed for Silicon Labs. And running nwoolls latest homebrew of 4.8 [even though the New R-Box will not run well on versions of cgminer greater than 4.7.1 - i posted a separate thread about this, but it hasn't been resolved - one unit will get 100Gh/s and the other 55 with 4.8.x or 4.9.x].
Anyway, as you can see from the screen shots, cgminer does see the 2 valid USB devices, but when running them with
cgminer -o stratum.mining.eligius.st -u -p nothing
I get errors seeing the USB devices.
Any tips on making this would rock! Thank you!
https://cldup.com/LlzolNwqOO.png
https://cldup.com/605BXL2g6P.png
I have two New R-Boxes and they run fine in VMWare Fusion running Win2000. I'd like to not have the overhead of always running VMWare Fusion though. I've made certain any and all USB drivers have been removed for Silicon Labs. And running nwoolls latest homebrew of 4.8 [even though the New R-Box will not run well on versions of cgminer greater than 4.7.1 - i posted a separate thread about this, but it hasn't been resolved - one unit will get 100Gh/s and the other 55 with 4.8.x or 4.9.x].
Anyway, as you can see from the screen shots, cgminer does see the 2 valid USB devices, but when running them with
cgminer -o stratum.mining.eligius.st -u
I get errors seeing the USB devices.
Any tips on making this would rock! Thank you!
https://cldup.com/LlzolNwqOO.png
https://cldup.com/605BXL2g6P.png
November 28, 2014, 11:21:59 PM
Homebrew formulas, Shell scripts, and precompiled binaries have all been updated with BFGMiner 5.0 and CGMiner 4.8.
November 09, 2014, 03:55:54 PM
November 04, 2014, 02:25:33 AM
Homebrew formulas, Shell scripts, and precompiled binaries have all been updated with CGMiner 4.7.1.
October 21, 2014, 01:55:55 PM
Homebrew formulas, Shell scripts, and precompiled binaries have all been updated with BFGMiner 4.10.
October 03, 2014, 03:36:58 PM
September 10, 2014, 11:05:40 PM
Homebrew formulas, Shell scripts, and precompiled binaries have all been updated with BFGMiner 4.8 and CGMiner 4.6.
August 12, 2014, 07:52:38 PM
July 10, 2014, 07:48:15 PM
July 10, 2014, 07:46:44 PM
Firstly, I've updated bfgminer 4.4 using your latest HomeBrew scripts... is it possible to mine Vertcoin with bfgminer? It doesn't seem to be working as expected. The logging seems to be fine within bfgminer, but the hashing isn't reflected on the stats page of my pool. Everything seems to work fine when I use MacMiner, but bfgminer in Terminal doesn't.
I'm using the following:
bfgminer --scrypt -o stratum+tcp://p2pool3.coingiant.net:9174 -u username -p password
Do I need to add something else for the scrypt-n?
I'm using the following:
bfgminer --scrypt -o stratum+tcp://p2pool3.coingiant.net:9174 -u username -p password
Do I need to add something else for the scrypt-n?
BFGMiner doesn't support Scrypt-N (or other new alt-alogrithms like Keccak, X11-X15, etc).
Secondly, I followed all the latest instructions for installing MultiMiner, but it keeps crashing. "Application not responding" error, and I have to force quit. Could it have something to do with the following message from Brew Doctor:
Warning: /Library/Frameworks/Mono.framework detected
This can be picked up by CMake's build system and likely cause the build to
fail. You may need to move this file out of the way to compile CMake.
Warning: /Library/Frameworks/Mono.framework detected
This can be picked up by CMake's build system and likely cause the build to
fail. You may need to move this file out of the way to compile CMake.
Unfortunately I'm not familiar with that issue. The warning from Homebrew should be fine though - it's just picking up the Mono install. You could try installing a newer (or older) version of Mono.
Once I get Multiminer working, is there a scrypt-n setting?
There is, but honestly quite a few of the newer algorithms don't work under OS X. This is because the miners that implement them are either not updated for OS X or do not compile on OS X at all. Most of the folks writing and forking miners don't think about OS X much, if ever (which is one of the reasons I made this thread and the Homebrew scripts etc).
July 09, 2014, 02:03:18 AM
Sorry to be such a nOOb, Two quick questions...
Firstly, I've updated bfgminer 4.4 using your latest HomeBrew scripts... is it possible to mine Vertcoin with bfgminer? It doesn't seem to be working as expected. The logging seems to be fine within bfgminer, but the hashing isn't reflected on the stats page of my pool. Everything seems to work fine when I use MacMiner, but bfgminer in Terminal doesn't.
I'm using the following:
bfgminer --scrypt -o stratum+tcp://p2pool3.coingiant.net:9174 -u username -p password
Do I need to add something else for the scrypt-n?
Secondly, I followed all the latest instructions for installing MultiMiner, but it keeps crashing. "Application not responding" error, and I have to force quit. Could it have something to do with the following message from Brew Doctor:
Warning: /Library/Frameworks/Mono.framework detected
This can be picked up by CMake's build system and likely cause the build to
fail. You may need to move this file out of the way to compile CMake.
Once I get Multiminer working, is there a scrypt-n setting?
Thanks again for everything you do. Looking forward to getting MultiMiner up so some coin starts coming your way with gratitude.
Firstly, I've updated bfgminer 4.4 using your latest HomeBrew scripts... is it possible to mine Vertcoin with bfgminer? It doesn't seem to be working as expected. The logging seems to be fine within bfgminer, but the hashing isn't reflected on the stats page of my pool. Everything seems to work fine when I use MacMiner, but bfgminer in Terminal doesn't.
I'm using the following:
bfgminer --scrypt -o stratum+tcp://p2pool3.coingiant.net:9174 -u username -p password
Do I need to add something else for the scrypt-n?
Secondly, I followed all the latest instructions for installing MultiMiner, but it keeps crashing. "Application not responding" error, and I have to force quit. Could it have something to do with the following message from Brew Doctor:
Warning: /Library/Frameworks/Mono.framework detected
This can be picked up by CMake's build system and likely cause the build to
fail. You may need to move this file out of the way to compile CMake.
Once I get Multiminer working, is there a scrypt-n setting?
Thanks again for everything you do. Looking forward to getting MultiMiner up so some coin starts coming your way with gratitude.
July 08, 2014, 11:44:14 PM
Homebrew formulas, Shell scripts, and precompiled binaries have all been updated with BFGMiner 4.4.
In addition, the original post has been updated with a new article:
How-to mine with ZeusMiners
In addition, the original post has been updated with a new article:
How-to mine with ZeusMiners
July 08, 2014, 11:43:16 PM
Your article at http://blog.nwoolls.com/2014/05/13/bitcoin-mining-on-mac-os-x-hex•fury-asics/ was a godsend!
Quick Question... I've got two Hex•Furies plugged in and blinking, but BFGminer only seems to see one... is there something easy I'm missing?
It shows...
--------------------------------------------------------------------------------
BIF 0: 49.7C | 11.40/11.70/11.11Gh/s | A:18 R:1+0(5.2%) HW: 67/2.2%
OCL 0: | OFF /180.5/ 0.0kh/s | A: 0 R:0+0(none) HW: 0/none
BPM 0: | 10.01/ 9.62/ 0.00Gh/s | A: 0 R:0+0(none) HW:20226/100%
--------------------------------------------------------------------------------
Quick Question... I've got two Hex•Furies plugged in and blinking, but BFGminer only seems to see one... is there something easy I'm missing?
It shows...
--------------------------------------------------------------------------------
BIF 0: 49.7C | 11.40/11.70/11.11Gh/s | A:18 R:1+0(5.2%) HW: 67/2.2%
OCL 0: | OFF /180.5/ 0.0kh/s | A: 0 R:0+0(none) HW: 0/none
BPM 0: | 10.01/ 9.62/ 0.00Gh/s | A: 0 R:0+0(none) HW:20226/100%
--------------------------------------------------------------------------------
Try running the following command:
Code:
bfgminer -S noauto -S bif:all -d? -D
This should scan for only Bi*Fury (and Hex*Fury) devices and display extended output.
Also try unplugging and plugging the devices back in. In my experience the Bi*Fury and Hex*Fury ASICs are sensitive to being probed by other drivers and may stop working unless unplugged / replugged.
June 21, 2014, 01:23:43 PM
Your article at http://blog.nwoolls.com/2014/05/13/bitcoin-mining-on-mac-os-x-hex•fury-asics/ was a godsend!
Quick Question... I've got two Hex•Furies plugged in and blinking, but BFGminer only seems to see one... is there something easy I'm missing?
It shows...
--------------------------------------------------------------------------------
BIF 0: 49.7C | 11.40/11.70/11.11Gh/s | A:18 R:1+0(5.2%) HW: 67/2.2%
OCL 0: | OFF /180.5/ 0.0kh/s | A: 0 R:0+0(none) HW: 0/none
BPM 0: | 10.01/ 9.62/ 0.00Gh/s | A: 0 R:0+0(none) HW:20226/100%
--------------------------------------------------------------------------------
Quick Question... I've got two Hex•Furies plugged in and blinking, but BFGminer only seems to see one... is there something easy I'm missing?
It shows...
--------------------------------------------------------------------------------
BIF 0: 49.7C | 11.40/11.70/11.11Gh/s | A:18 R:1+0(5.2%) HW: 67/2.2%
OCL 0: | OFF /180.5/ 0.0kh/s | A: 0 R:0+0(none) HW: 0/none
BPM 0: | 10.01/ 9.62/ 0.00Gh/s | A: 0 R:0+0(none) HW:20226/100%
--------------------------------------------------------------------------------
June 11, 2014, 11:56:36 AM
Homebrew formulas, Shell scripts, and precompiled binaries have all been updated with BFGMiner 4.2 and CGMiner 4.3.5.
Jump to: