Topic: making mining pool problems (Read 2197 times)
how do you fix it ?
solved wallet reg issue
will do cheers
Fixed 404 issue, downgrade to bitcoind v0.9.0 github repo, 0.10.0 does something to the bitcoind service.
yep params are right no interferance on connections whats so ever block chains down 100%
if i run 2 units i have no issue but if its just one unit connected it acts up
both units connected under same user it runs fine it switchs between the 2 at certain difficulty
etc so the hasing rate is fluxing dependant on which device is on if its solo 1 device only then there a period of no displayed hash rates but the server is still accepting valid shares
if i run 2 units i have no issue but if its just one unit connected it acts up
both units connected under same user it runs fine it switchs between the 2 at certain difficulty
etc so the hasing rate is fluxing dependant on which device is on if its solo 1 device only then there a period of no displayed hash rates but the server is still accepting valid shares
using an s1 and s3 that mine fine when i just leave 1 miner on the local it stops showing hasing rates for like 25 minutes but if i connect my 2nd unit its a continous hash rate bouncing between the two
no longer have error listed above just trying to solve
miners and hope they dont cut out on mpos
miners and hope they dont cut out on mpos
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
any idea
Traceback (most recent call last):
File "/root/stratum-mining/lib/block_updater.py", line 49, in run
prevhash = util.reverse_hash((yield self.bitcoin_rpc.prevhash()))
Error: 404 Not Found
Traceback (most recent call last):
File "/root/stratum-mining/lib/block_updater.py", line 49, in run
prevhash = util.reverse_hash((yield self.bitcoin_rpc.prevhash()))
Error: 404 Not Found
I am not certain what is the problem. Have you downloaded whole blockchain and is your parameters in Bitcoin.conf correct?
Which port would I have to open to connect externally 
8332 would be fine. You can also use a custom port if you like.
also my miners will only mine for like 25 minutes and then mpos front will start showing decreases in hash rates then hit zero but my miners still show in there web GUI they’re mining
but on mpos it will show no hashing rates
but on mpos it will show no hashing rates
Which miners and OS are you using? I think mpos supports getblocktemplate mining protocol, have you tried it?
You may want to look at this tutorial: https://github.com/MPOS/php-mpos/wiki/Quick-Start-Guide
If you can't make it ready, you can try CoiniumServ. It looks like easier to setup. https://bitcointalksearch.org/topic/coiniumserv-open-source-high-performance-pooled-mining-server-software-604476
P.S. This might also help you. http://coingolem.com/how-to-set-up-your-own-mining-pool-using-mpos-229/.
any idea
Traceback (most recent call last):
File "/root/stratum-mining/lib/block_updater.py", line 49, in run
prevhash = util.reverse_hash((yield self.bitcoin_rpc.prevhash()))
Error: 404 Not Found
Which port would I have to open to connect externally
also my miners will only mine for like 25 minutes and then mpos front will start showing decreases in hash rates then hit zero but my miners still show in there web GUI they’re mining
but on mpos it will show no hashing rates
Traceback (most recent call last):
File "/root/stratum-mining/lib/block_updater.py", line 49, in run
prevhash = util.reverse_hash((yield self.bitcoin_rpc.prevhash()))
Error: 404 Not Found
Which port would I have to open to connect externally
also my miners will only mine for like 25 minutes and then mpos front will start showing decreases in hash rates then hit zero but my miners still show in there web GUI they’re mining
but on mpos it will show no hashing rates
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
am i to guess that i cant start mining on the pool until the entire block chains down etc ??
got all compiled cant run stratum till block chains downloaded
got all compiled cant run stratum till block chains downloaded
Yes, you can't. You can't earn anything from it unless you have a lot of miners but you can learn from it.
am i to guess that i cant start mining on the pool until the entire block chains down etc ??
got all compiled cant run stratum till block chains downloaded
got all compiled cant run stratum till block chains downloaded
have a relatively good knowledge of linux and the pool its self will only be on local network just for the sakwe of learning from it im already mining on
slushs pool i was just looking to gain a better in depth knowledge of how the setting up a mining pool and understanding how it works will post in regards of mpos shortly as iv had to start from scratch
upto stratum again silly question is there some where i can download the sha256 script from or do i just change the coin algo in stratum setup
slushs pool i was just looking to gain a better in depth knowledge of how the setting up a mining pool and understanding how it works will post in regards of mpos shortly as iv had to start from scratch
upto stratum again silly question is there some where i can download the sha256 script from or do i just change the coin algo in stratum setup
Setting up your own MPOS pool is a relatively non-trivial task. The instructions on how to do so are very extensive. Just out of curiosity, why are you trying to setup your own pool?
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
ok run into next problem iv tried assignging one of my miners to the adress on mpos and it isnt doin nout not even mining any idea
Have you installed it correctly? See https://github.com/MPOS/php-mpos/blob/master/README.md and other DOCs(if any), if you have missed something.
P.S. Please give any image or something, it is hard to answer without knowing exact problem(s).
ok run into next problem iv tried assignging one of my miners to the adress on mpos and it isnt doin nout not even mining any idea
ok so iv installed ubuntu on
on my pc linux compilling etc went fine
now i have got
bitcoin server starting
bingo got wallet adress
now onto stratum
schwartzs
on my pc linux compilling etc went fine
now i have got
bitcoin server starting
bingo got wallet adress
now onto stratum
schwartzs
hi not to sure if this is in the right sections if so sorry mod
main question
im able to do all the compiling
./autogen
./configure
make
etc
but when i run it it tells me to switch over to bitcoin-qt i cant seem to get the wallet setup let alone start downloading the blockchain via terminal
also keep running into the problem of pointing the bitcoin-qt to the conf file
any tips and help any one can provide would be much appreicated
schwartzs
main question
im able to do all the compiling
./autogen
./configure
make
etc
but when i run it it tells me to switch over to bitcoin-qt i cant seem to get the wallet setup let alone start downloading the blockchain via terminal
also keep running into the problem of pointing the bitcoin-qt to the conf file
any tips and help any one can provide would be much appreicated
schwartzs
Only reason I say this is because it's been told to me before. Not to this specifically to this...
But if you're having trouble just setting up the wallet, what makes you think you're going to run a successful pool?
Just food for thought. Make sure all your deps are installed prior to running ./autogen and ./configure and perhaps run sudo -i before running those commands or putting sudo in front of them. Hard to diagnose without a copy/paste of the exact information it's giving you. If there is some sort of debug log you could check that too, to determine the issue as well.
If you want post the information out here to let us help you setup your wallet then think about the running the pool. It takes a lot more than a wallet and some php-mpos to run a pool successfully and I'll tell you, if you're on a VPS you're already on the wrong path.
My 2 Satoshi's,
Adaryian
Connection via pc to my vps and running bitcoind via the static ip assigned to the vps
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
I have edited my previous post regarding Bitcoin configuration file. Please try it out.
You are connecting from vps to pc or pc to vps or connection bitcoind to locally(in vps)?
im also doin this via a vps
You are connecting from vps to pc or pc to vps or connection bitcoind to locally(in vps)?
when running bitcoind saying setup rpc user etc even tho i have trouble with bitcoin.conf location maybe
also
says bitcoind no longer supports rpc function
im also doin this via a vps
any help to get past this and start server and block chain download be much appreicated
schwartzs
also
says bitcoind no longer supports rpc function
im also doin this via a vps
any help to get past this and start server and block chain download be much appreicated
schwartzs
Jump to: