can I run marlin and then run say an ether miner? or do I have to use claymore duel miner for that?
Claymore is a dual miner for ETH + SIA.
Marlin is for solo SC only.
Topic: Marlin - SiaCoin OpenCL/CUDA Miner - CPU/GPU/iGPU (Read 12012 times)
Claymore is a dual miner for ETH + SIA.
Marlin is for solo SC only.
this miner isn't going to make it long since there are now asics that mine siacoin
is this why when I mine on the pool I get very little coins?
why do all these pools have a minimum payout of 500 to 1000 SC?
thats alot of work to do without getting paid it would take me 1 whole month with my 1070 to mine 500 coins
Difficulty is 3x of what it should be (which is reducing your income by a 2/3rds.)
Plus the difficulty for the whole network is going up, and will go up as ASICs are landing.
this miner isn't going to make it long since there are now asics that mine siacoin
is this why when I mine on the pool I get very little coins?
why do all these pools have a minimum payout of 500 to 1000 SC?
thats alot of work to do without getting paid it would take me 1 whole month with my 1070 to mine 500 coins
this miner isn't going to make it long since there are now asics that mine siacoin
can I run marlin and then run say an ether miner? or do I have to use claymore duel miner for that?
I notice an ID for the CPU. Can you use this to mine as well? If so, how? Thanks
How much dump sia?
i got with marlin and a gtx980ti about 1600mhs.
it took about 4days without oc the gpu to reach the payout.
i think its cheaper to buy the siacoins than mining with a single gpu the power cost are higher than the 500sia coins worth from payout at my pool.
what do u think about sia mining with the difficulty we have now?
it took about 4days without oc the gpu to reach the payout.
i think its cheaper to buy the siacoins than mining with a single gpu the power cost are higher than the 500sia coins worth from payout at my pool.
what do u think about sia mining with the difficulty we have now?
Hi, such a stupid question maybe because i am stupid also, but i have run SiaCoin Gui and then i have allowed it to Synchronize.
I do not understand it , but every time i click on receive address it shows me a new unique address to use, i dont understand this?
So, in my miner batch file i dont understand what address to put... this is the weirdest wallet i have used.
I do not understand it , but every time i click on receive address it shows me a new unique address to use, i dont understand this?
So, in my miner batch file i dont understand what address to put... this is the weirdest wallet i have used.
Hello guys,
I need help.When I start marlin miner (marlin.exe) I get this message.If someone can help me...
LINK IMAGE: https://prnt.sc/fr7xff
I need help.When I start marlin miner (marlin.exe) I get this message.If someone can help me...
LINK IMAGE: https://prnt.sc/fr7xff
marlin.exe -H eu.siamining.com:3333 -d 1,2,3,4,5 -K m2p2 -I 29 -u address
pause
pause
Yes, I setup the .bat as instructed. Rather new at this.
I will try writing pause and see what happens.
Thanks
Edit: :: Your Payout Address.
SET address= I already put my address here
:: Worker Name.
SET worker=whitey
:: Intensity. Lower values may be better for normal desktop usage.
SET intensity=28
::
marlin.exe -u %address%.%worker% -I %intensity% pause
Like this? Still crashes
I will try writing pause and see what happens.
Thanks
Edit: :: Your Payout Address.
SET address= I already put my address here
:: Worker Name.
SET worker=whitey
:: Intensity. Lower values may be better for normal desktop usage.
SET intensity=28
::
marlin.exe -u %address%.%worker% -I %intensity% pause
Like this? Still crashes
Have you written a batch file?
Write "pause" on the final line to see why it's closing.
How new are you to this? Did you follow the siamining help guide step by step? I did and it worked perfectly.
Write "pause" on the final line to see why it's closing.
How new are you to this? Did you follow the siamining help guide step by step? I did and it worked perfectly.
Does not start. Get command window for a split second, and then nothing.
Gigabyte GTX 1070 G1
Win 10
i5-6600k
Gigabyte GTX 1070 G1
Win 10
i5-6600k
Cool, thanks for all the advice.
What coins are you mining with your rig, considering that Sia is only "half as profitable" as you say?
What coins are you mining with your rig, considering that Sia is only "half as profitable" as you say?
Using MSI Afterburner, I'm now at
Power Limit % 105
Temp Limit 85
Core Clock +82
Mem Clock +164
Fan Speed 76% (on Auto)
Temperature is at 82C.
Hashing a consistent 1050.6MH/s
.
Do you recommend I turn off auto fan and manually churn it up a little to get that temp down?
I've also opened the side of the desktop case to give it some better airflow.
Power Limit % 105
Temp Limit 85
Core Clock +82
Mem Clock +164
Fan Speed 76% (on Auto)
Temperature is at 82C.
Hashing a consistent 1050.6MH/s
.
Do you recommend I turn off auto fan and manually churn it up a little to get that temp down?
I've also opened the side of the desktop case to give it some better airflow.
I would, I don't think temps in the 80°C or even high 70's are good.
But every miner have different preferences.
Using MSI Afterburner, I'm now at
Power Limit % 105
Temp Limit 85
Core Clock +82
Mem Clock +164
Fan Speed 76% (on Auto)
Temperature is at 82C.
Hashing a consistent 1050.6MH/s
.
Do you recommend I turn off auto fan and manually churn it up a little to get that temp down?
I've also opened the side of the desktop case to give it some better airflow.
Power Limit % 105
Temp Limit 85
Core Clock +82
Mem Clock +164
Fan Speed 76% (on Auto)
Temperature is at 82C.
Hashing a consistent 1050.6MH/s
.
Do you recommend I turn off auto fan and manually churn it up a little to get that temp down?
I've also opened the side of the desktop case to give it some better airflow.
I've done a small overclock of 82 to the core clock and 164 to the mem clock and getting 914.5MH/s now,with m2p4 at I=29 . A nice boost.
Temp is still 80 with fan speed at 64%.
Any dangers to this?
Temp is still 80 with fan speed at 64%.
Any dangers to this?
I much prefer a cooler temperature than slow fans. I have a maximum temperature target of 72°C set up with 100% fan speed a the end of the curve.
I've done a small overclock of 82 to the core clock and 164 to the mem clock and getting 914.5MH/s now,with m2p4 at I=29 . A nice boost.
Temp is still 80 with fan speed at 64%.
Any dangers to this?
But all these cards are heavily power limited (70-80%)
The problem is with these speeds Sia is half as profitable than some other coins.
I'm pretty new and only learning. My goal is to reach 1000 Sia coins, then get the payout and move on to something else. What coins are you mining with your rig, considering that Sia is only half as profitable?
You're definitely doing better than me, bathrobehero.
Which specific 970 do you have? Is it overclocked? Mine is all factory settings.
(Edited my post with more results)
Which specific 970 do you have? Is it overclocked? Mine is all factory settings.
(Edited my post with more results)
Gigabyte OC cards, +80 Mhz but 80% power limit.
But these cards on risers, if you have a monitor attached to it mining will be slower.
Edit: additional speeds I get:
750Ti: 365 Mh/s (m2p2)
1070: 1690 Mh/s (m2p4)
1080Ti: 2920 Mh/s (m2p2x32)
But all these cards are heavily power limited (70-80%)
The problem is with these speeds Sia is half as profitable than some other coins.
Jump to: