Pages:
Author

Topic: Miner Performance-Boosting Firmware By MSKMINER - page 4. (Read 984 times)

newbie
Activity: 4
Merit: 0
How do I get back from your firmware to the stock?

When turned on, hold down the ip report button for approximately 30 to 40 seconds until the green and red LEDs flash simultaneously.

For T9 +, where can I download the firmware?
copper member
Activity: 28
Merit: 0
copper member
Activity: 28
Merit: 0
Tell me - can I manually set the fan speed to 100% on the firmware for T17?

Yes. Set the speed hold to the lowest temperature and in fact there will always be 100%
copper member
Activity: 28
Merit: 0
Please tell me how many air cubes T17 output?

2 fans of 300-350 cubic meters each.
copper member
Activity: 28
Merit: 0
Interested in WhatsMiner from availability

Hi. @mskmineroffice during business hours needs to be clarify whether there available
copper member
Activity: 28
Merit: 0
How do I disable ASIC using  command? To stop mining l3+

Just click on the hammer icon on the toolbar and select-Stop miner
copper member
Activity: 28
Merit: 0
How i may view prices?

You can see the current prices in  chat  Telegram https://t.me/mskminernews
copper member
Activity: 28
Merit: 0
Which side of the hash Board numbering starts from

The S17+ is numbered from the power supply. Boards 1-2-3, connectors J1-J2-J3, chains CH0-CH1-CH2
copper member
Activity: 28
Merit: 0
What firmware for T17 to put 2.0 or 1.1?

The difference is in the interface, 2.0 has Russian
copper member
Activity: 28
Merit: 0
Hello, with three ASIC  with 17+ problem, two  do not work, the third does not turn on now, most likely problem in the power supply . Can I redo two ASICs out of three by rearranging the boards?

Hi, starting with firmware version 1.0.9, the Board hash can be mixed without any restrictions. Even pro and not pro s17.
newbie
Activity: 6
Merit: 0
Hello, with three ASIC  with 17+ problem, two  do not work, the third does not turn on now, most likely problem in the power supply . Can I redo two ASICs out of three by rearranging the boards?
copper member
Activity: 28
Merit: 0
Tell  why when inserting a card for firmware both lights light up S9i


Virus, lack of micro-damage to the slot controller, faulty slot. We think it's a virus.
copper member
Activity: 28
Merit: 0
Control boards from s9a are friends with hash boards from 9j and from s9i?

Of course, the same.
copper member
Activity: 28
Merit: 0
Need a firmware where can specify your fee


The s9 and L3+ have a redirect ASIC of speed menu where you can specify your fee up to 20%
copper member
Activity: 28
Merit: 0
For S17 , where can I download the firmware?

In our telegram chat https://t.me/asicfw  or write on the site in the feedback form.
copper member
Activity: 28
Merit: 0
Why do need to flash ASIC miners?

Stock firmware often comes out with errors, and they are not optimized for the most effective mining. With our firmware you will be able to reduce the power consumption, temperature, or to increase hash rate.
copper member
Activity: 28
Merit: 0
Help with firmware for Z11 I can't find

We don't have  firmware for this device.

Do you plan to work with her in the future?

Follow our news.
copper member
Activity: 28
Merit: 0
copper member
Activity: 28
Merit: 0
Help with firmware for Z11 I can't find

We don't have  firmware for this device.
copper member
Activity: 28
Merit: 0
Which side of the hash Board numbering starts from

The S17+ is numbered from the power supply. Boards 1-2-3, connectors J1-J2-J3, chains CH0-CH1-CH2
Pages:
Jump to: