Thanks for this miner. Working perfectly.
I am fairly new to mining as I just got my hardware all in on Friday.
The minute I actually get some bitcoin, I will be sending a donation your way.
I do have a question.
My setup is 1 R-Box 32, 1 R-Box 110, a regular ASIC USB Block (333Mhz..yeah I know), 3 Antminer U2s, 1 Bi*Fury and 1 HexFury.
I will eventually replace all the USB sticks with R-Boxes.
If I wanted to upgrade to cgminer to 4.9.1 what should I compile for?
Just icarus? Or do I need other compile options?
I guess I am asking how minera is compiled for 4.8 it comes with.
Edit: I got it working. This is what I did if you are curious.
All is well and running 4.9.1 now.
cd /tmp
wget http://ck.kolivas.org/apps/cgminer/cgminer-4.9.1.tar.bz2
tar xvf cgminer-4.9.1.tar.bz2
cd cgminer-4.9.1
./configure --enable-icarus --enable-bitfury
sudo make
sudo make install
STOPPED MINER RUNNING
cp cgminer /var/www/minera/minera-bin/
Topic: [Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 84. (Read 850502 times)
February 22, 2015, 07:33:47 PM
February 22, 2015, 05:59:43 AM
Thanks for the quick reply.
I have seen the examples but not sure where I enter these.
Do I turn on Manual and enter there in which case what is is the full script to scan all and clock set - apologies but bit new to this
I have seen the examples but not sure where I enter these.
Do I turn on Manual and enter there in which case what is is the full script to scan all and clock set - apologies but bit new to this
Yep, turn on "manual" miner settings and put one of those entire string in (select the relative preferred miner). Remember to look at log if you are in trouble.
February 22, 2015, 05:53:58 AM
Thanks for the quick reply.
I have seen the examples but not sure where I enter these.
Do I turn on Manual and enter there in which case what is is the full script to scan all and clock set - apologies but bit new to this
I have seen the examples but not sure where I enter these.
Do I turn on Manual and enter there in which case what is is the full script to scan all and clock set - apologies but bit new to this
February 22, 2015, 05:40:11 AM
Thanks have done and and working better now - thanks
On a different matter
Am now running another Pi a B+ with 3 Zeus Blizzards attached using the the fork for cgminer for Zeus - cannot get bfgminer to work.
Am getting 85% hardware errors.
The issue is they are running to fast I think (clock speed) - the total hash showing is 5.07&Mh/s (each one around 1.68 to 1.7!!) should be around 4.3 to 4.5 with clock running at 340.
Question is how do I custom control the clock speed in Minera must be up around 380.
Tried --zeus-clock 340 but it doesn't load - where and what to I enter
Any advice welcome
On a different matter
Am now running another Pi a B+ with 3 Zeus Blizzards attached using the the fork for cgminer for Zeus - cannot get bfgminer to work.
Am getting 85% hardware errors.
The issue is they are running to fast I think (clock speed) - the total hash showing is 5.07&Mh/s (each one around 1.68 to 1.7!!) should be around 4.3 to 4.5 with clock running at 340.
Question is how do I custom control the clock speed in Minera must be up around 380.
Tried --zeus-clock 340 but it doesn't load - where and what to I enter
Any advice welcome
Look at the help page here: http://getminera.com/help there are many config examples you can try:
Cgminer Dmaxl:
Code:
--scrypt --scan-serial zeus:auto --zeus-chips 6 --zeus-clock 330
Bfgminer:
Code:
--scrypt -S zus:all --set zus:chips=6 --set zus:clock=330
If something goes wrong, take a look at the miner log, you can find it at the bottom of the dashboard page.
February 22, 2015, 05:19:03 AM
Thanks have done and and working better now - thanks
On a different matter
Am now running another Pi a B+ with 3 Zeus Blizzards attached using the the fork for cgminer for Zeus - cannot get bfgminer to work.
Am getting 85% hardware errors.
The issue is they are running to fast I think (clock speed) - the total hash showing is 5.07&Mh/s (each one around 1.68 to 1.7!!) should be around 4.3 to 4.5 with clock running at 340.
Question is how do I custom control the clock speed in Minera must be up around 380.
Tried --zeus-clock 340 but it doesn't load - where and what to I enter
Any advice welcome
On a different matter
Am now running another Pi a B+ with 3 Zeus Blizzards attached using the the fork for cgminer for Zeus - cannot get bfgminer to work.
Am getting 85% hardware errors.
The issue is they are running to fast I think (clock speed) - the total hash showing is 5.07&Mh/s (each one around 1.68 to 1.7!!) should be around 4.3 to 4.5 with clock running at 340.
Question is how do I custom control the clock speed in Minera must be up around 380.
Tried --zeus-clock 340 but it doesn't load - where and what to I enter
Any advice welcome
February 22, 2015, 12:12:04 AM
OK does any one have an issue when re-starting or starting Minerd, it just hangs and will not proceed.
When pressing refresh it stops and goes back to the previous screen - not running
This also happens with saving settings or save and restart settings.
Running on Raspberry Pi B with Antminer U3 and 2 x Antminer U2
Tried rebooting - shutdown, unplug and restart
Before this running fine then stops so trying to restart and get this issue
Have re-installed on SD card once this worked and machine restarted OK.
Any suggestions - as to what is happening.
When pressing refresh it stops and goes back to the previous screen - not running
This also happens with saving settings or save and restart settings.
Running on Raspberry Pi B with Antminer U3 and 2 x Antminer U2
Tried rebooting - shutdown, unplug and restart
Before this running fine then stops so trying to restart and get this issue
Have re-installed on SD card once this worked and machine restarted OK.
Any suggestions - as to what is happening.
SD cards aren't really designed to have Operating Systems on them so some behave irregularly and corrupt easily, try another SD if possible.
February 20, 2015, 09:33:23 PM
You mean take it out the slot and re-insert?
try another SD
February 20, 2015, 04:20:12 PM
You mean take it out the slot and re-insert?
February 20, 2015, 02:37:00 PM
OK does any one have an issue when re-starting or starting Minerd, it just hangs and will not proceed.
When pressing refresh it stops and goes back to the previous screen - not running
This also happens with saving settings or save and restart settings.
Running on Raspberry Pi B with Antminer U3 and 2 x Antminer U2
Tried rebooting - shutdown, unplug and restart
Before this running fine then stops so trying to restart and get this issue
Have re-installed on SD card once this worked and machine restarted OK.
Any suggestions - as to what is happening.
When pressing refresh it stops and goes back to the previous screen - not running
This also happens with saving settings or save and restart settings.
Running on Raspberry Pi B with Antminer U3 and 2 x Antminer U2
Tried rebooting - shutdown, unplug and restart
Before this running fine then stops so trying to restart and get this issue
Have re-installed on SD card once this worked and machine restarted OK.
Any suggestions - as to what is happening.
try replacing your sd card
February 20, 2015, 02:28:42 PM
OK does any one have an issue when re-starting or starting Minerd, it just hangs and will not proceed.
When pressing refresh it stops and goes back to the previous screen - not running
This also happens with saving settings or save and restart settings.
Running on Raspberry Pi B with Antminer U3 and 2 x Antminer U2
Tried rebooting - shutdown, unplug and restart
Before this running fine then stops so trying to restart and get this issue
Have re-installed on SD card once this worked and machine restarted OK.
Any suggestions - as to what is happening.
When pressing refresh it stops and goes back to the previous screen - not running
This also happens with saving settings or save and restart settings.
Running on Raspberry Pi B with Antminer U3 and 2 x Antminer U2
Tried rebooting - shutdown, unplug and restart
Before this running fine then stops so trying to restart and get this issue
Have re-installed on SD card once this worked and machine restarted OK.
Any suggestions - as to what is happening.
February 19, 2015, 04:29:01 PM
+1
I tries several too...
And now with "custom miner" this is my favorite !!!!
I tries several too...
And now with "custom miner" this is my favorite !!!!
February 19, 2015, 01:35:29 PM
i have donated to the author of this i plan on donating more once i get some more coins i only run 4 5chip gridseeds being im testing this out before getting bigger miners i just got into mining
Same here I have tried all of the available Pi based mining OS's but this one is the best by far!
February 19, 2015, 08:59:21 AM
Cooooooool thanks
February 19, 2015, 08:18:53 AM
Does anybody know if this works with the Raspberry P1 2
Yes of course! It works with every Raspberry model, new ones included. (I think it works on Bananian too but I never tried)
February 19, 2015, 07:31:00 AM
Does anybody know if this works with the Raspberry P1 2
February 14, 2015, 04:31:56 PM
No Problem Sir, good thing needs time 
Looking forward to your release!
Looking forward to your release!
February 14, 2015, 04:46:30 AM
@cavaliersrus sorry for delay, you can try to look at the miner logs at /var/logs/minera/log-.php it should be simple to discover the date/time your miner died.
Thanks guys donations are always much appreciate
PS
0.5.0 is coming with network miner support, I'm sorry but I need more time to finish it, hope to release it for March.
Thanks guys donations are always much appreciate
PS
0.5.0 is coming with network miner support, I'm sorry but I need more time to finish it, hope to release it for March.
February 13, 2015, 07:06:53 PM
i have donated to the author of this i plan on donating more once i get some more coins i only run 4 5chip gridseeds being im testing this out before getting bigger miners i just got into mining
February 13, 2015, 02:45:49 PM
For such a great piece of software, I urge everyone to donate.
February 07, 2015, 11:07:59 AM
one more question michelem if i run this on my solar array and it runs out of power is there a way to see a log file once i get power reistablished to see how long the miner was running ? or if i run this off a battery with a power inverter ? i have a solar charger on a single battery i would like to test this on sir
Jump to: