Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 16. (Read 167182 times)

ASIC-HUB v2.9.4
- Increased global and command timeouts for the machine requests.
- Changed Antminer config editing method, now making reboot again after config editing to avoid firmware bugs.

msOS Update
- Improved ClockTune for the latest Nvidia drivers to attempt to auto-solve Xorg problems.

Worker's profile
- Added Toggle to switch between colors shades and colorful palette for your hardware table and charts.
- Added Toggle to switch between column and line charts for hashrate and power consumption in your hardware charts.

Search
- Added Search field to following pages: Config Templates, ClockTune, 24h Logs, Scheduler, and Benchmark.

minerstat for Windows v6.4.0
Changes since v6.3.4 version:
- Added support for Diagnostics. Now you can test for conflicting software, reserved ports, check Virtual memory and other useful data with a single click.
- Added support for Discovery tool. You can now effortlessly discover new Windows workers that can be found on your local network. The machine can be discovered on fresh installs and if you are not logged in to it yet.
- Added System logs. Reboot, Shutdown, Start/Stop events are logged and available in the activity log. Also on the diagnostics page, you can track the reboot counter too.
- Added Windows Boot Protection. Windows loads other things after user login. With that in mind, we have added a 15 second wait time to start the miner and overclocks and give Windows enough time to initialize.
- Improved process killing. It will no longer close unrelated CMD windows on your desktop.
- Improved ClockTune error handling that will prevent crashes on common user related errors.
- Reduced the amount of data sent over in Idle mode.
- Disabled Hardware Acceleration and limited to a maximum of 10FPS for the Graphics Interface to make minerstat GUI more responsive.
- Other smaller fixes and stability improvements

Reminder: Since v6.3.0 release it's possible to update minerstat for Windows from Workers list. To manually update run C:/minerstat-windows/auto-updater.exe or reinstall.

Download: https://minerstat.com/software/windows

Worker's profile
- Added search to ClockTune and Config templates selection dropdown menu.
- Added toggle to hardware list to show or hide currently applied ClockTune values.

msOS Miner Update
 teamredminer v0.8.5

Windows Miner Update
 teamredminer v0.8.5

teamredminer: Added Windows clocks/voltage/built-in timings control. Fixed some issues with Windows fan control, mostly for Big Navi GPUs. Added mem temp limits (stop/resume) --mem_temp_limit and --mem_temp_resume. Added extranonce subscription for Autolykos2 algorithm.

msOS Miner Update
 nbminer v39.2

Windows Miner Update
 nbminer v39.2

nbminer: Ethash added LHR lock detection and recovery in LHR mode. Improved Autolykos2 stratum protocol. Miner console displaying memory temperatures for AMD/Nvidia GPUs if available under Windows.

Triggers
- Added an option to apply ClockTune profile on Memory Temp trigger.
- Hashrate, Efficiency, and Consumption triggers will not get fired anymore if mining client's uptime is less than 10 minutes.

Triggers / Alerts
You can now Pause Alerts and Triggers for individual worker from both worker's profile page and config page.

Triggers
Added an option to apply ClockTune profile on GPU Temp trigger.

msOS Miner Update
 gminer v2.66
 srbminer-multi v0.8.0

Windows Miner Update
 gminer v2.66
 srbminer-multi v0.8.0

gminer: Improved KawPow (RVN) performance under msOS on Nvidia GPUs. Improved compatibility with Ethash pools.
gminer-amd: Added support for KawPow algorithm for AMD GPUs.
srbminer-multi: Performance increase on Etchash, Ethash, Ubqhash, Verthash, HeavyHash algorithm for RX6800, RX6900 GPUs.

SSD Flasher v0.4
- Increased size of Config partition to 9GB.
- Allowing .zip files to flash. You can drag and drop the downloaded msOS image to the SSD flasher partition and will be flashed to the auto-detected or selected SSD/M2 drive.

Download: https://minerstat.com/software/ssd-flasher

msOS Miner Update
 nbminer v39.1

Windows Miner Update
 nbminer v39.1

nbminer: Ethash improves the hashrate of LHR mode 1-2%. The default value of -lhr changes from 68 to 69. Fixed LHR mode support on windows driver 471.11. Resolved issues with KawPow. Resolved Radeon VII issue on windows driver 21.6.1+.

msOS v1.7.6
- AMD Driver: amdgpu-pro 21.20 (with 20.40 openCL).

No changes since v1.7.5. The new v1.7.6 package includes older AMD driver to provide more compatibility with phoenix-eth and teamredminer and confirmed to work with RX6600. Currently this image is recommended for latest generation of GPUs. For older NAVIs v1.4.10 is recommended.

ASIC-Hub v2.9.3
- Support for Innosilicon older Python based firmwares.

SSD Flasher v0.3
- Updated base OS.
- Dual UEFI/Legacy bootloader for better compatibility.
- Improved M2 flashing.
- Updated all available Intel Ethernet drivers to the latest version (igb/ixgbe/e1000).

Download: https://minerstat.com/software/ssd-flasher

ASIC-Hub v2.9.2
- Support for Whatsminer btminer based firmware in addition to cgminer ones.

msOS Miner Update
 gminer v2.65

Windows Miner Update
 gminer v2.65

gminer: Fixed floating hashrate reporting (appeared in v2.64).

msOS v1.4.10
- Updated all available Intel Ethernet drivers to the latest version (igb/ixgbe/e1000).
- Support for LHR V2 Nvidia GPUs without driver update.
- Nvidia Driver: v470.63.01.

msOS v1.7.5
- Updated Kernel to the latest available v5.4.141.
- Updated all available Intel Ethernet drivers to the latest version (igb/ixgbe/e1000).
- Better support for new motherboards.
- Support for LHR V2 Nvidia GPUs without driver update.
- Support for AMD RX 6600 XT.
- AMD Driver: amdgpu-pro v21.30 (with 20.40 openCL).
- Nvidia Driver: v470.63.01.

Download:
Note: You don't have to take any action if your machines are working fine; packages are only recommended for new machines or reflashes. You can download and reflash manually or use command mreflash in your msOS console.

msOS Update
- Improved support for AMD VII Pro.
- New command: igb-update to update/install all available Intel networking drivers (igb/ixgbe/e1000). Recommended for H510 Pro BTC+ motherboards. This update will be included in future images by default.
- Improved SSH Key generation.
- Improved netcheck command with hints.
- Support for latest v5.4.141 kernel within kernel-update (Do not update; that is only for new motherboards).

Triggers
Added 6 new triggers that can detect and react to Config, Auth, Driver, GPU, Client, and Pool errors.

msOS Miner Update
> nbminer v39.0

Windows Miner Update
> nbminer v39.0

nbminer: New LHR mode for ETH mining on RTX 30 series LHR GPUs, supports Windows & Linux, able to get ~70% of maximum unlocked hashrate. -lhr default to 0, meaning even if -lhr is not set, LHR mode with -lhr 68 will be applied to LHR GPUs if certain GPUs are detected. A good start tuning value is 68, which has been tested to be stable on most rig configurations.

Triggers
Added new trigger: Shares count.
You can now set a trigger that will take care of unresponsive or crashed mining clients / pools / configurations that might result in same shares count report over longer period of time.

Triggers
You can now load template config to worker from Triggers. This applies to Time, Efficiency, and Rejected shares events.

msOS Update
Support for AMD 6600 XT. For optimal experience update amdgpu drivers to 21.30 with amd-update --install 21.30 - new msOS images with included kernels and drivers are coming next week.

msOS Update
- AMD Fan Curve will try to detect driver RPM offsets to adjust fan speeds. This may help to avoid issues when Maximum fan speed is set to a lower value than 100%.

msOS Miner Update
 nanominer v3.3.8

Windows Miner Update
 nanominer v3.3.8

nanominer: Improved KAWPOW and RandomX algorithms.

msOS Update
- Removed obsolete code for Vega overclocking. No longer applying modified tables without ClockTune being set. Make sure to set clocks/voltages in ClockTune.
- Support for latest available Nvidia 470.63.01 drivers. To install manually enter: nvidia-update --install 470.63.01

Stratu.ms
- Showing your stratum IP address on Stratum Profile. Can be useful to adjust Payout settings on the pool side.

That's absolutely not true, on Windows not supports, that's right. On linux/msos 470.57.02 Supports 3070 Ti and 3080 Ti.
You can manually update drivers to support LHR cards. We will update msOS packages once Nvidia releasing new drivers with memory temperature support.

Enter: nvidia-update --install 470.57.02

You said that RTX 30** are available too but mine wasn't detected because it's an LHR GPU, have you guys updated Nvidia drivers to the latest versions? Last time I checked ( day ago ) it was still at 470 which 3070ti don't support

Here are 10 misconceptions about crypto mining at home.

https://medium.com/minerstat/10-misconceptions-about-crypto-mining-at-home-15927f192053