Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 97.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: FFI2013 on July 05, 2017, 08:12:39 AM

Quote from: coinscrow on July 05, 2017, 05:28:47 AM

Quote from: Jamievs on July 05, 2017, 05:20:27 AM

I have a question regagarding DCR. I have been using stratum+tcp://yiimp.ccminer.org:3252 and my wallet address and been happily mining on and off using the ALGO. Lately more and more the pool is full and my workers wont connect. So I want to swap to https://dcr.suprnova.cc. But they say they need a weblogin.worker. What do I enter in the Payout Address on the adresseditor here; https://minerstat.com/addresseditor.html ? Do I do weblogin.(worker) as payout adress and make workers in the suprnova portal which are equal to the (worker)'s I have?

YEs the yiimp is always full, the suprnova is a good alternative.

weblogin.(WORKER)

and in the supernova add your workername same as on the minerstat dashboard.

I'm dual mining and just switched from Eth to etc on miningpoolhub now the dashboard is saying I'm mining Eth and etc and sia stats are missing the pool is showing my sia miners but not the dashboard

send me your accesskey to i can check it

Jamievs

sr. member

Activity: 266

Merit: 250

Quote from: coinscrow on July 05, 2017, 05:28:47 AM

Quote from: Jamievs on July 05, 2017, 05:20:27 AM

I have a question regagarding DCR. I have been using stratum+tcp://yiimp.ccminer.org:3252 and my wallet address and been happily mining on and off using the ALGO. Lately more and more the pool is full and my workers wont connect. So I want to swap to https://dcr.suprnova.cc. But they say they need a weblogin.worker. What do I enter in the Payout Address on the adresseditor here; https://minerstat.com/addresseditor.html ? Do I do weblogin.(worker) as payout adress and make workers in the suprnova portal which are equal to the (worker)'s I have?

YEs the yiimp is always full, the suprnova is a good alternative.

weblogin.(WORKER)

and in the supernova add your workername same as on the minerstat dashboard.

Thanks, that's working Cool

FFI2013

hero member

Activity: 906

Merit: 507

Quote from: coinscrow on July 05, 2017, 05:28:47 AM

Quote from: Jamievs on July 05, 2017, 05:20:27 AM

I have a question regagarding DCR. I have been using stratum+tcp://yiimp.ccminer.org:3252 and my wallet address and been happily mining on and off using the ALGO. Lately more and more the pool is full and my workers wont connect. So I want to swap to https://dcr.suprnova.cc. But they say they need a weblogin.worker. What do I enter in the Payout Address on the adresseditor here; https://minerstat.com/addresseditor.html ? Do I do weblogin.(worker) as payout adress and make workers in the suprnova portal which are equal to the (worker)'s I have?

YEs the yiimp is always full, the suprnova is a good alternative.

weblogin.(WORKER)

and in the supernova add your workername same as on the minerstat dashboard.

I'm dual mining and just switched from Eth to etc on miningpoolhub now the dashboard is saying I'm mining Eth and etc and sia stats are missing the pool is showing my sia miners but not the dashboard

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Jamievs on July 05, 2017, 05:20:27 AM

I have a question regagarding DCR. I have been using stratum+tcp://yiimp.ccminer.org:3252 and my wallet address and been happily mining on and off using the ALGO. Lately more and more the pool is full and my workers wont connect. So I want to swap to https://dcr.suprnova.cc. But they say they need a weblogin.worker. What do I enter in the Payout Address on the adresseditor here; https://minerstat.com/addresseditor.html ? Do I do weblogin.(worker) as payout adress and make workers in the suprnova portal which are equal to the (worker)'s I have?

YEs the yiimp is always full, the suprnova is a good alternative.

weblogin.(WORKER)

and in the supernova add your workername same as on the minerstat dashboard.

Jamievs

sr. member

Activity: 266

Merit: 250

I have a question regagarding DCR. I have been using stratum+tcp://yiimp.ccminer.org:3252 and my wallet address and been happily mining on and off using the ALGO. Lately more and more the pool is full and my workers wont connect. So I want to swap to https://dcr.suprnova.cc. But they say they need a weblogin.worker. What do I enter in the Payout Address on the adresseditor here; https://minerstat.com/addresseditor.html ? Do I do weblogin.(worker) as payout adress and make workers in the suprnova portal which are equal to the (worker)'s I have?

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: magnoman on July 04, 2017, 06:53:46 PM

Quote from: npittas on July 04, 2017, 06:39:36 PM

Yeah page is down...as I was trying to set up dual mining...

An ETA would be nice

It's the middle of the night where Coinscrow is. Might be a few hours unless he's awake.

i was avake, but i didn't notice it.. i need to troubleshoot what happend

@cryptominer420 like it

cryptominer420

sr. member

Activity: 450

Merit: 255

Would be nice to have a local Master Node type setup were we load a local master node which our individual rigs connect to.
Setup would be like

Master node
Web interface for changing rig setting like there is currently on the website
and it will sync settings to the website
It also has a sync from web function were we can configure a new node on the website and then sync it's settings to the master node.
Syncs rig statistics to the website

Slave node
Receives configs, Profitability Etc from the master node
Runs miners

This type of setup could prevent many issues in the case were the website is down or under DDOS ETC. It would also reduce bandwidth usage for the webserver.

magnoman

newbie

Activity: 33

Merit: 0

Quote from: npittas on July 04, 2017, 06:39:36 PM

Yeah page is down...as I was trying to set up dual mining...

An ETA would be nice

It's the middle of the night where Coinscrow is. Might be a few hours unless he's awake.

npittas

newbie

Activity: 29

Merit: 0

Yeah page is down...as I was trying to set up dual mining...

An ETA would be nice

FFI2013

hero member

Activity: 906

Merit: 507

Quote from: br2459 on July 04, 2017, 06:10:12 PM

Anyone else having a connectivity issue to the website?

yes having trouble

br2459

full member

Activity: 269

Merit: 102

Anyone else having a connectivity issue to the website?

VyprBTC

full member

Activity: 350

Merit: 100

Quote from: coinscrow on July 04, 2017, 02:26:20 PM

Quote from: VyprBTC on July 04, 2017, 01:50:46 PM

coinscrow i know you're trying to make the site look cool but my suggestion is take the floating images that just float around. it was cool for about 5 seconds 20 years ago, not so much any more. i actually thought i had dirt or something crawling on my screen for a second till i realized i was in a time warp back to the 90's

i just tired, i found cool for few minutes after i realised it's very drop the performance of the site.. so no more bg effect Grin

yes, page loads noticeably faster without it!

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: VyprBTC on July 04, 2017, 01:50:46 PM

coinscrow i know you're trying to make the site look cool but my suggestion is take the floating images that just float around. it was cool for about 5 seconds 20 years ago, not so much any more. i actually thought i had dirt or something crawling on my screen for a second till i realized i was in a time warp back to the 90's

i just tried, i found cool for few minutes after i realised it's very drop the performance of the site.. so no more bg effect Grin

VyprBTC

full member

Activity: 350

Merit: 100

coinscrow i know you're trying to make the site look cool but my suggestion is take the floating images that just float around. it was cool for about 5 seconds 20 years ago, not so much any more. i actually thought i had dirt or something crawling on my screen for a second till i realized i was in a time warp back to the 90's

money1

newbie

Activity: 29

Merit: 0

Tried to Duplicate Watt Tools profile. If I select duplicate profile, then won't load GPU settings image, can't edit settings.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Jamievs on July 04, 2017, 07:11:15 AM

Quote from: Jamievs on July 01, 2017, 02:25:21 AM

Quote from: killerelite on June 30, 2017, 12:37:14 PM

Pls fix Dgb profitibility , It is showing too much

Euhm where can we add DGB? I dont see it in the settings Huh

So... Still awaiting an answer....

cminer-80-x64 -a myr-gr -o stratum+tcp://dgbg.suprnova.cc:7978 -u coinscrow.1 -p x -b 0.0.0.0:3333 --api-bind 3333 --api-remote d=0.03  

or skein algo.

Jamievs

sr. member

Activity: 266

Merit: 250