Yes, I love LBRY!
It has an active community, lots of content publishers and unlike most other crypto projects, LBRY has working software! (it is in beta, but has come a pretty long way)
You can see the bitcointalk-thread of our LBRY community-page at:
https://bitcointalksearch.org/topic/--2665793
Or just go to https://LBRY.Community
You can win contests now! (up to 8000 LBC which is over 5000$ as of 29. Dec 2017)
Topic: Mining LBRY with 1080 ti (Read 8970 times)
Hello all, im new in mining and my 1080 ti in Claymore Dual Eth- Lbry shows me 32 Mhs on eth, and only 17mh on LBC, this is very far from the 470 mh that sais whattomine, and the speeds that all of you report on LBC.
¿Please can anyone help me?, any advice would be very appreciated.
Thank you
¿Please can anyone help me?, any advice would be very appreciated.
Thank you
That's dual. Mine it solo with ccminer if you want the big hashrate. I pull around 245 mh/s on gtx 1070's.
Another question. Would dual zec/lbc ever be possible? Seems would be very profitable for gtx 1070s, 1080s, and 1080 tis.
yeah here is hoping someone picks up on this due to zec diff increase
i get 760h/s from mine and would love to see them dual mine and use more of these epic cards
500mh one single 1080ti? Why whattomine says 46 mh on 1080ti?
500 is correct i'm getting 515-520 with each of my Asus Strix.
Idk.... are u sure 500?
Because i get 18.6 mh on my 1060 and 23 on my rx 480
Too much difference
Whattomine and nicehash profit calculation they both say 1080ti hashrate is 46mh 🤔🤔
NiceHash calc for 1080Ti on Lbry is 0.47Gh/s... so thats 470MH/s yea?
*edit* - someone posted this already
Hello all, im new in mining and my 1080 ti in Claymore Dual Eth- Lbry shows me 32 Mhs on eth, and only 17mh on LBC, this is very far from the 470 mh that sais whattomine, and the speeds that all of you report on LBC.
¿Please can anyone help me?, any advice would be very appreciated.
Thank you
¿Please can anyone help me?, any advice would be very appreciated.
Thank you
That's dual. Mine it solo with ccminer if you want the big hashrate. I pull around 245 mh/s on gtx 1070's.
Another question. Would dual zec/lbc ever be possible? Seems would be very profitable for gtx 1070s, 1080s, and 1080 tis.
Hello all, im new in mining and my 1080 ti in Claymore Dual Eth- Lbry shows me 32 Mhs on eth, and only 17mh on LBC, this is very far from the 470 mh that sais whattomine, and the speeds that all of you report on LBC.
¿Please can anyone help me?, any advice would be very appreciated.
Thank you
¿Please can anyone help me?, any advice would be very appreciated.
Thank you
That's dual. Mine it solo with ccminer if you want the big hashrate. I pull around 245 mh/s on gtx 1070's.
Another question. Would dual zec/lbc ever be possible? Seems would be very profitable for gtx 1070s, 1080s, and 1080 tis.
Hello all, im new in mining and my 1080 ti in Claymore Dual Eth- Lbry shows me 32 Mhs on eth, and only 17mh on LBC, this is very far from the 470 mh that sais whattomine, and the speeds that all of you report on LBC.
¿Please can anyone help me?, any advice would be very appreciated.
Thank you
¿Please can anyone help me?, any advice would be very appreciated.
Thank you
I get 315MHASH stable with oc on the gtx 1070. You should be able to get 550MHASH on the 1080ti.
use LBRY sp-mod
-500 on the memory clock 100% tdp or higher. 120%. And then overclock the core as much as possible.
IDK what hashrates are on 10 series, but I've tested LBRY with my laptop's 860m and I get 51MH/s with CCminer 2.0 but with your SP mod only 41MH/s. I've used both newest release maybe it could be better if I've build it with Cuda 8.0? use LBRY sp-mod
-500 on the memory clock 100% tdp or higher. 120%. And then overclock the core as much as possible.
I get 315MHASH stable with oc on the gtx 1070. You should be able to get 550MHASH on the 1080ti.
use LBRY sp-mod
-500 on the memory clock 100% tdp or higher. 120%. And then overclock the core as much as possible.
use LBRY sp-mod
-500 on the memory clock 100% tdp or higher. 120%. And then overclock the core as much as possible.
Right now running d=8 with 3 evga gtx 1080...approximately 23-27 coins per day.
I don't think d=8 is good, that's too low. d=32 is the lowest I think for whole rig I would say you need more. I think CCminer recommend for whole rig d=256, default is d=128. You can play with intensity. I've post some info on FB LBRY mining page https://www.facebook.com/groups/1961052344127892/
Right now running d=8 with 3 evga gtx 1080...approximately 23-27 coins per day.
it's because of two things one is the diff that continue to go up and the other is because of the variance of the hashrate if the pool, suprnova can't find all the block
500mh one single 1080ti? Why whattomine says 46 mh on 1080ti?
500 is correct i'm getting 515-520 with each of my Asus Strix.
Idk.... are u sure 500?
Because i get 18.6 mh on my 1060 and 23 on my rx 480
Too much difference
Whattomine and nicehash profit calculation they both say 1080ti hashrate is 46mh 🤔🤔
Hmm, the calculators say its 470Mh/s or 0.47Gh/s
Yes sorry my bad i was watching lbr2 or something
Instead it is lbry my 1060 is 128mh
Well 500 is a good profit i think is better than eth which u do about 37?
Lbry is totally different than Lyra2Rev2.
This algorithm is profitable right now, since the coin is 45% up in coinmarketcap.
500mh one single 1080ti? Why whattomine says 46 mh on 1080ti?
500 is correct i'm getting 515-520 with each of my Asus Strix.
Idk.... are u sure 500?
Because i get 18.6 mh on my 1060 and 23 on my rx 480
Too much difference
Whattomine and nicehash profit calculation they both say 1080ti hashrate is 46mh 🤔🤔
Hmm, the calculators say its 470Mh/s or 0.47Gh/s
Yes sorry my bad i was watching lbr2 or something
Instead it is lbry my 1060 is 128mh
Well 500 is a good profit i think is better than eth which u do about 37?
500mh one single 1080ti? Why whattomine says 46 mh on 1080ti?
500 is correct i'm getting 515-520 with each of my Asus Strix.
Idk.... are u sure 500?
Because i get 18.6 mh on my 1060 and 23 on my rx 480
Too much difference
Whattomine and nicehash profit calculation they both say 1080ti hashrate is 46mh 🤔🤔
Hmm, the calculators say its 470Mh/s or 0.47Gh/s
Idk.... are u sure 500?
Because i get 18.6 mh on my 1060 and 23 on my rx 480
Too much difference
Whattomine and nicehash profit calculation they both say 1080ti hashrate is 46mh 🤔🤔
Dude are you serious? It's LBC not ETH... Because i get 18.6 mh on my 1060 and 23 on my rx 480
Too much difference
Whattomine and nicehash profit calculation they both say 1080ti hashrate is 46mh 🤔🤔
500mh one single 1080ti? Why whattomine says 46 mh on 1080ti?
500 is correct i'm getting 515-520 with each of my Asus Strix.
Idk.... are u sure 500?
Because i get 18.6 mh on my 1060 and 23 on my rx 480
Too much difference
Whattomine and nicehash profit calculation they both say 1080ti hashrate is 46mh 🤔🤔
500mh one single 1080ti? Why whattomine says 46 mh on 1080ti?
500 is correct i'm getting 515-520 with each of my Asus Strix.
500mh one single 1080ti? Why whattomine says 46 mh on 1080ti?
experiment with difficulty setting in your miner program. It makes a huge difference. try setting it to d=4 or d=8 or d=16 and see which pays out more for you. ccminer x64 d=2 on my settings.
Hi, may I know how to set the difficulty in miner? I am using ccminer 2.0, 5x gtx 1060 6gb hashrate 990mh/s
What diff amount should I set in miner base on this spec?
you can set your worker diff by using the password field in your bat file. instead of the usual -p x, use -p d=256 etc.
they actually have a note explaining it that is always on top of the dashboard, just look up
You can now use d=? in worker password field for static diff. For example "d=16" gives you a static diff of 16:
./sgminer -k lbry -o stratum+tcp://lbry.suprnova.cc:6256 -u suprnova.1 -p d=16 -I 21 -g 4 -w 256
experiment with difficulty setting in your miner program. It makes a huge difference. try setting it to d=4 or d=8 or d=16 and see which pays out more for you. ccminer x64 d=2 on my settings.
Hi, may I know how to set the difficulty in miner? I am using ccminer 2.0, 5x gtx 1060 6gb hashrate 990mh/s
What diff amount should I set in miner base on this spec?
Jump to: