Topic: [ mining os ] nvoc - page 154. (Read 418546 times)
By the way, a little off topic, but do you guys think it's ok to run 12 GPUs (all 1070s except for 2 which are 1060s) on two EVGA G3 850W PSUs? I downvolted all of the cards and each 1070 is right around 100W/piece and 1060s are roughly 80W. Been stable now for over a week, just to get some feedback regarding this setup.
So, in my effort to thoroughly understand nvOC at a reasonably low level, I am stumped by one question. What is calling/launching 2unix at boot and again if 3main is killed and 2unix "falls out"?
It appears to be part of gnome-session but I am not yet familiar enough with Ubuntu to find it. I see the auto login setup in /etc/lightdm/lightdm.conf but I don't see anything launching that explicitly in .bashrc or .profile. What am I missing?
Thanks in advance.
It appears to be part of gnome-session but I am not yet familiar enough with Ubuntu to find it. I see the auto login setup in /etc/lightdm/lightdm.conf but I don't see anything launching that explicitly in .bashrc or .profile. What am I missing?
Thanks in advance.
Guake terminal is involved
Yes. I found gnome-terminal.desktop and guake:guake.desktop in /home/m1/.config/autostart but I am still not putting all of the pieces of the puzzle together yet. I don't see any mention of 2unix being launched there.
For those of you that care, I found it:
m1 1943 1703 0 12:02 ? 00:00:00 python2 -m guake.main
m1 1999 1943 0 12:02 ? 00:00:00 gnome-pty-helper
m1 2000 1943 0 12:02 pts/16 00:00:00 /bin/bash
m1 2085 1943 0 12:02 pts/18 00:00:00 /bin/bash
m1 2316 1943 0 12:03 pts/21 00:00:00 /bin/bash
Thx. Did you find the location of guake.main?
So, in my effort to thoroughly understand nvOC at a reasonably low level, I am stumped by one question. What is calling/launching 2unix at boot and again if 3main is killed and 2unix "falls out"?
It appears to be part of gnome-session but I am not yet familiar enough with Ubuntu to find it. I see the auto login setup in /etc/lightdm/lightdm.conf but I don't see anything launching that explicitly in .bashrc or .profile. What am I missing?
Thanks in advance.
It appears to be part of gnome-session but I am not yet familiar enough with Ubuntu to find it. I see the auto login setup in /etc/lightdm/lightdm.conf but I don't see anything launching that explicitly in .bashrc or .profile. What am I missing?
Thanks in advance.
Guake terminal is involved
Yes. I found gnome-terminal.desktop and guake:guake.desktop in /home/m1/.config/autostart but I am still not putting all of the pieces of the puzzle together yet. I don't see any mention of 2unix being launched there.
For those of you that care, I found it:
m1 1943 1703 0 12:02 ? 00:00:00 python2 -m guake.main
m1 1999 1943 0 12:02 ? 00:00:00 gnome-pty-helper
m1 2000 1943 0 12:02 pts/16 00:00:00 /bin/bash
m1 2085 1943 0 12:02 pts/18 00:00:00 /bin/bash
m1 2316 1943 0 12:03 pts/21 00:00:00 /bin/bash
A few updates I've need to do since installing 1.4 that may help others:
Many errors in my syslog referencing timeout waiting for device - There is a hardcoded Sandisk drive in /etc/fstab that should be commented out:
Also, if you adjust wattage limits into the triple digits (more than 100w) the temp script seems to throw issues now. Changing:
to
seems to bring things back to normal.
Still seeing lower hashrates than I did on version 1.1, due to cards using about 80% of their available power limit and not sure why. Also seeing hostname errors and plenty of small other things on a vanilla build (literally just changed 5 items in 1bash) - v1.1 was rock solid, and while I love the idea of these new features, I value stability of mining operation above all else and it seems like we're going backwards a bit on that front.
Many errors in my syslog referencing timeout waiting for device - There is a hardcoded Sandisk drive in /etc/fstab that should be commented out:
Code:
UUID=55184403759586FB /mnt/55184403759586FB auto nosuid,nodev,nofail,x-gvfs-show,ro 0 0
/dev/disk/by-id/usb-SanDisk_Cruzer_Blade_4C530001260812105231-0:0-part1 /mnt/usb-SanDisk_Cruzer_Blade_4C530001260812105231-0:0-part1 auto nosuid,nodev,nofail,x-gvfs-show,ro 0 0
/dev/disk/by-id/usb-SanDisk_Cruzer_Blade_4C530001260812105231-0:0-part1 /mnt/usb-SanDisk_Cruzer_Blade_4C530001260812105231-0:0-part1 auto nosuid,nodev,nofail,x-gvfs-show,ro 0 0
Also, if you adjust wattage limits into the triple digits (more than 100w) the temp script seems to throw issues now. Changing:
Code:
echo -n 117.00| tail -c -5 | head -c -3
to
Code:
echo -n 117.00| tail -c -6 | head -c -3
seems to bring things back to normal.
Still seeing lower hashrates than I did on version 1.1, due to cards using about 80% of their available power limit and not sure why. Also seeing hostname errors and plenty of small other things on a vanilla build (literally just changed 5 items in 1bash) - v1.1 was rock solid, and while I love the idea of these new features, I value stability of mining operation above all else and it seems like we're going backwards a bit on that front.
Nice catch on triple digit, I just install 1.4 on one of my 1070 rigs and was goin crazy why it keep popping up old power limit 25 .... New 125
Then I remember your post
Saved my day.
Hi,
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
Usually pools dont check worker password and best keep it the default "x"
If any one wants to mine for you ... let them mine ... lol
But I use this option : some of my workers have password for other reasons and the pool test it : if the password is wrong, I cannot connect my worker (error connection message).
How can I make with nvOC ?
not sure why people are still spreading this but some pool do need the right password. I spent hours trying to figure out why I couldnt mine on a pool using nvOC until I replaced the default password with x (nvOC v19 had z for some reason)
So use the password you have in your account (like the ones you setup in suprnova) other pools probably dont care though
Hi guys can you help me how to add more algo on SALTER_NICEHASH? I want to add cryptonight so that it can automatically switch to that algo pls tnx tnx tnx 
Installed v19-1.4 yesterday on a new rig to test a new card.
Thought updates were supposed to be disabled in this one, but when I logged in this morning nothing was working and saw this in the logs:
[ 142.874644] NVRM: API mismatch: the client has the version 384.90, but
NVRM: this kernel module has the version 384.59. Please
NVRM: make sure that this kernel module and all NVIDIA driver
NVRM: components have the same version.
Had to do this to fix it:
sudo: unable to resolve host gtx1080ti-r1
Hit:1 http://us.archive.ubuntu.com/ubuntu xenial InRelease
Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]
Hit:3 http://ppa.launchpad.net/graphics-drivers/ppa/ubuntu xenial InRelease
Fetched 102 kB in 0s (273 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
38 packages can be upgraded. Run 'apt list --upgradable' to see them.
sudo: unable to resolve host gtx1080ti-r1
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
sudo dpkg --configure -a'
Here's what I have:
APT::Periodic::Update-Package-Lists "1";
APT::Periodic::Download-Upgradeable-Packages "0";
APT::Periodic::AutocleanInterval "0";
20auto-upgrades
APT::Periodic::Update-Package-Lists "1";
APT::Periodic::Unattended-Upgrade "1";
I changed the last two to 0.
Thought updates were supposed to be disabled in this one, but when I logged in this morning nothing was working and saw this in the logs:
[ 142.874644] NVRM: API mismatch: the client has the version 384.90, but
NVRM: this kernel module has the version 384.59. Please
NVRM: make sure that this kernel module and all NVIDIA driver
NVRM: components have the same version.
Had to do this to fix it:
sudo: unable to resolve host gtx1080ti-r1
Hit:1 http://us.archive.ubuntu.com/ubuntu xenial InRelease
Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]
Hit:3 http://ppa.launchpad.net/graphics-drivers/ppa/ubuntu xenial InRelease
Fetched 102 kB in 0s (273 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
38 packages can be upgraded. Run 'apt list --upgradable' to see them.
sudo: unable to resolve host gtx1080ti-r1
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
sudo dpkg --configure -a'
Here's what I have:
APT::Periodic::Update-Package-Lists "1";
APT::Periodic::Download-Upgradeable-Packages "0";
APT::Periodic::AutocleanInterval "0";
20auto-upgrades
APT::Periodic::Update-Package-Lists "1";
APT::Periodic::Unattended-Upgrade "1";
I changed the last two to 0.
I want to participate and create web site with rig control (like on simplemining.net)
I can create website that manages rigs, website can generate full config bash file.
Modifications needed for nvOS is to make on boot to download new config from server and every few minutes make some requests to server to send statistics (hashrate / temreratures / miner console /etc ) and in reply server will return commands if rig must reboot or redownload config (by user request)
So i can make server part easily, who will participate? With whom i can talk about that?
I think that its a really good idea, for non pro users and can be use as alternative for simplemining or ethos, but first of all we (all users of this rigs) should we have server with some ddos protection or even CDN (can be ovh + cloudflare) if ofcourse it will be in "public" zone, because i can be also avalibe only in your local network...
For start i need to communicate with some linux side developers =)
For getting new config simple wget can be used (ex wget http://address.com/get_config/user_login(from config)/mac_address(from system)/config.sh ) which will be generated on the fly based on user config on website (miner selection with parameters, overclocking etc, and all other configuration options which are available now)
fullzero?
simplemining's business structure is to make money out of it, hence the need for central server so they can control it.
nvOC is free/open source so there is no need for central server and download of config files from the central server.
There is no registered business and no liability nor inspiration to run secure server with ddos protection, fall back system, etc.
What happens if someone hacks your server and distribute/push new config files and make every nvOC rig mine for them? Will you compensate?
The idea of web interface is great and sooner or later will be implemented into nvOC but not as an interface to central server but local one. I should be able to login to my server's IP web interface and manage my rig trough any web browser.
I think we should steer the developement toward this.
Furthermore, we can add master/slave interfaces so that if you have multiple rigs, you will have one master to control all slave rigs.
Right?
The main idea is to make managing all rigs from one place (for example select all and set to mine BTCz for example to avoid making it one by one)
>@Dangerd,
>Sent you a pm and asked some questions with no reply
>I'm handling nvoc web info,
>And would love to help and make it better
Sent you reply, just saw pm notification in mail.
Dear fullzero, thanks for your hard work on nvoc. Have been using it for half a year already and very much pleased with it.
Are you planning to add BTG in the new release? Didn't see it in 1.4. Would be great.
Thanks a lot
Are you planning to add BTG in the new release? Didn't see it in 1.4. Would be great.
Thanks a lot
Tried my best to search for an answer, but no luck so far...
has anyone successfully gotten rid of the login loop issue?
Ive console logged in, did a re-image, tried different versions, and every ubuntu based fix i could find online (clear and .Xauthority fixes)
Board is a HP z400 board
has anyone successfully gotten rid of the login loop issue?
Ive console logged in, did a re-image, tried different versions, and every ubuntu based fix i could find online (clear and .Xauthority fixes)
Board is a HP z400 board
broth i have one board like that and it is working fine i didn't any adjustment, just keep on mine if u have a second boot device connected, and don't plug or unplug any devices the first time or when it is loading.
Hi,
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
Usually pools dont check worker password and best keep it the default "x"
If any one wants to mine for you ... let them mine ... lol
But I use this option : some of my workers have password for other reasons and the pool test it : if the password is wrong, I cannot connect my worker (error connection message).
How can I make with nvOC ?
What I did was add a variable for the password in 1bash just after this comment:
Code:
# set YOUR ADDRESSES, WORKERS, POOL, INTENSITY and PORT:
SUPRNOVA_PWD=
SUPRNOVA_PWD=
and then modify 3main by changing:
Code:
... --pass x ...
to
Code:
... --pass $SUPRNOVA_PWD ...
Hope this helps.
I will try as soon as possible (not possible for a few days now).
I think this syntax would be decumented in the configuration file : I'm probably the unique miner on SuprNova :-).
Hi,
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
Usually pools dont check worker password and best keep it the default "x"
If any one wants to mine for you ... let them mine ... lol
But I use this option : some of my workers have password for other reasons and the pool test it : if the password is wrong, I cannot connect my worker (error connection message).
How can I make with nvOC ?
What I did was add a variable for the password in 1bash just after this comment:
Code:
# set YOUR ADDRESSES, WORKERS, POOL, INTENSITY and PORT:
SUPRNOVA_PWD=
SUPRNOVA_PWD=
and then modify 3main by changing:
Code:
... --pass x ...
to
Code:
... --pass $SUPRNOVA_PWD ...
Hope this helps.
I want to participate and create web site with rig control (like on simplemining.net)
I can create website that manages rigs, website can generate full config bash file.
Modifications needed for nvOS is to make on boot to download new config from server and every few minutes make some requests to server to send statistics (hashrate / temreratures / miner console /etc ) and in reply server will return commands if rig must reboot or redownload config (by user request)
So i can make server part easily, who will participate? With whom i can talk about that?
I think that its a really good idea, for non pro users and can be use as alternative for simplemining or ethos, but first of all we (all users of this rigs) should we have server with some ddos protection or even CDN (can be ovh + cloudflare) if ofcourse it will be in "public" zone, because i can be also avalibe only in your local network...
For start i need to communicate with some linux side developers =)
For getting new config simple wget can be used (ex wget http://address.com/get_config/user_login(from config)/mac_address(from system)/config.sh ) which will be generated on the fly based on user config on website (miner selection with parameters, overclocking etc, and all other configuration options which are available now)
fullzero?
simplemining's business structure is to make money out of it, hence the need for central server so they can control it.
nvOC is free/open source so there is no need for central server and download of config files from the central server.
There is no registered business and no liability nor inspiration to run secure server with ddos protection, fall back system, etc.
What happens if someone hacks your server and distribute/push new config files and make every nvOC rig mine for them? Will you compensate?
The idea of web interface is great and sooner or later will be implemented into nvOC but not as an interface to central server but local one. I should be able to login to my server's IP web interface and manage my rig trough any web browser.
I think we should steer the developement toward this.
Furthermore, we can add master/slave interfaces so that if you have multiple rigs, you will have one master to control all slave rigs.
Right?
Exactly what I had in mind for it.
@Dangerd,
Sent you a pm and asked some questions with no reply
I'm handling nvoc web info,
And would love to help and make it better
Hi,
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
Usually pools dont check worker password and best keep it the default "x"
If any one wants to mine for you ... let them mine ... lol
But I use this option : some of my workers have password for other reasons and the pool test it : if the password is wrong, I cannot connect my worker (error connection message).
How can I make with nvOC ?
I want to participate and create web site with rig control (like on simplemining.net)
I can create website that manages rigs, website can generate full config bash file.
Modifications needed for nvOS is to make on boot to download new config from server and every few minutes make some requests to server to send statistics (hashrate / temreratures / miner console /etc ) and in reply server will return commands if rig must reboot or redownload config (by user request)
So i can make server part easily, who will participate? With whom i can talk about that?
I think that its a really good idea, for non pro users and can be use as alternative for simplemining or ethos, but first of all we (all users of this rigs) should we have server with some ddos protection or even CDN (can be ovh + cloudflare) if ofcourse it will be in "public" zone, because i can be also avalibe only in your local network...
For start i need to communicate with some linux side developers =)
For getting new config simple wget can be used (ex wget http://address.com/get_config/user_login(from config)/mac_address(from system)/config.sh ) which will be generated on the fly based on user config on website (miner selection with parameters, overclocking etc, and all other configuration options which are available now)
fullzero?
simplemining's business structure is to make money out of it, hence the need for central server so they can control it.
nvOC is free/open source so there is no need for central server and download of config files from the central server.
There is no registered business and no liability nor inspiration to run secure server with ddos protection, fall back system, etc.
What happens if someone hacks your server and distribute/push new config files and make every nvOC rig mine for them? Will you compensate?
The idea of web interface is great and sooner or later will be implemented into nvOC but not as an interface to central server but local one. I should be able to login to my server's IP web interface and manage my rig trough any web browser.
I think we should steer the developement toward this.
Furthermore, we can add master/slave interfaces so that if you have multiple rigs, you will have one master to control all slave rigs.
Right?
I want to participate and create web site with rig control (like on simplemining.net)
I can create website that manages rigs, website can generate full config bash file.
Modifications needed for nvOS is to make on boot to download new config from server and every few minutes make some requests to server to send statistics (hashrate / temreratures / miner console /etc ) and in reply server will return commands if rig must reboot or redownload config (by user request)
So i can make server part easily, who will participate? With whom i can talk about that?
I think that its a really good idea, for non pro users and can be use as alternative for simplemining or ethos, but first of all we (all users of this rigs) should we have server with some ddos protection or even CDN (can be ovh + cloudflare) if ofcourse it will be in "public" zone, because i can be also avalibe only in your local network...
For start i need to communicate with some linux side developers =)
For getting new config simple wget can be used (ex wget http://address.com/get_config/user_login(from config)/mac_address(from system)/config.sh ) which will be generated on the fly based on user config on website (miner selection with parameters, overclocking etc, and all other configuration options which are available now)
fullzero?
Hi,
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
Usually pools dont check worker password and best keep it the default "x"
If any one wants to mine for you ... let them mine ... lol
Hi,
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
I think that In order to help you must post pool's name.
Hi,
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.
I think first create only local version, it will take a while to create good web gui.
Yes, in some cases i can agree with you, but i think that we can split work between some guys, one part of them will work on CLI / GUI, and another team will focus on WEB interface.
Maybe gui should be auto generate from onebash, if fullzero change something (add new miner or currency) in onebash it will auto change on gui (less work for future).
Jump to: