Topic: [ mining os ] nvoc - page 342. (Read 418555 times)
So I tried to run DGB since it is the new hot trend at the moment, overclock the card as core+200 and mem -300 as some people told in some topics. However the result is quite poor, it only does 650mh per card with that setting. I heard that 1080ti only do good on skein with cc miner 1.0, not sure if it is true or not, but I backed to mine Zcash since the rig run more stable with Zcash setting at the moment. Anyone get a better result with Skein on NVOC?
What is the maximum number of NVIDIA 1080 TI cards we can mine using NVOS per rig? Also what brand and version of the 1080 TI that can do 700-780 sols per 1 viewer's comment? Have the 1080 regular performance improved at all with the latest mining software or still in the 500s SOL range?
I only have 3x 1080ti so I am not sure how many it can handle. Using 1080tis will have a slightly lower maximum card limit than 1070s or 1060s, and would most likely begin to have quarks before then. I would avoid using more than 8 1080tis on one rig (and this might be too many).
I think citronick was using full tdp or higher with an aftermarket card. I believe it is this one: Gigabyte AORUS GeForce GTX 1080 Ti Xtreme Edition but I would check with him and make sure.
Do 220 core 900mem
It's a power limit of 200 you'll get 690-710sols
Without the Powerlimit it's an easy 710+ card
This card looks like a beast; my EVGAs become unstable even at +150cc sometimes.
I delayed posting the Aorus 1080tis (not EXTREME edition) because its still on Windows with AB settings and killing it on NH and zpool.
I need to play with the settings abit more before I move them to nvoc with the most optimized settings.
This Aorus are clocked much higher than the rest of the 1080tis - I tried... Zotac, Asus. The extreme edition has even higher clocks but I dont think I want to pay extra for a few more mhz, in which you can easily optimise the clocks for mining with sw - just get normal Auros edition which is already an respectable OC card.
It currently running on MSI Z270-A Pro mobo with 4 x gigantic Auros 1081tis, open caged designed cards hung like salted fish.... will take a pix when I clean things up a bit. I got 5 x Auros working on server PSU. This Auros is a beast but is PITA on size, cabling and power requirements. Best settings so far is 75%/+155/+0 for ZEC mining, for ETH you can increase the memory clocks too -- most of the settings are results from philipma testing and tinkering at his thread - so credits to him.
yun9999.... If i can guess what you doing with your farm with this 1080ti..... you can run 9 x Auros 1080ti with those new Z270 boards with 7 slots and 2 x M2 but you surely need server psu/pico/bb to complete the job.... this card at stock settings does an amazing 34MHs ETH, fan/cooling design the best I have seen so far and very quiet, to decrease heat, get a blower from the front to back.
What is the maximum number of NVIDIA 1080 TI cards we can mine using NVOS per rig? Also what brand and version of the 1080 TI that can do 700-780 sols per 1 viewer's comment? Have the 1080 regular performance improved at all with the latest mining software or still in the 500s SOL range?
I only have 3x 1080ti so I am not sure how many it can handle. Using 1080tis will have a slightly lower maximum card limit than 1070s or 1060s, and would most likely begin to have quarks before then. I would avoid using more than 8 1080tis on one rig (and this might be too many).
I think citronick was using full tdp or higher with an aftermarket card. I believe it is this one: Gigabyte AORUS GeForce GTX 1080 Ti Xtreme Edition but I would check with him and make sure.
Do 220 core 900mem
It's a power limit of 200 you'll get 690-710sols
Without the Powerlimit it's an easy 710+ card
It's awesome you're making this program, it will really be invaluable. These are the cards and motherboard I ordered for it:
http://www.ebay.com/itm/252834383013?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.com/itm/381927411340?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
2x http://www.ebay.com/itm/292077280960?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
1x http://www.ebay.com/itm/381782113316?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Looking forward to a hopefully fun and easy build!
http://www.ebay.com/itm/252834383013?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.com/itm/381927411340?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
2x http://www.ebay.com/itm/292077280960?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
1x http://www.ebay.com/itm/381782113316?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Looking forward to a hopefully fun and easy build!
Also sometimes it does not find the /media/m1/**** directory , workaround is to open the folder (happens on USB flash and harddrive), but this is not really workaround because it needs human intervention.
If you know other way of doing it you should implement it, this is recommendation.
Or maybe I've got corrupted image, i don't know.
If you know other way of doing it you should implement it, this is recommendation.
Or maybe I've got corrupted image, i don't know.
Try it this morning but it's often hang, need to hard reset the whole system with +150cc and +500mc for 6x 1080ti
How to auto type the miner1 password, I need to type it 3 times before the miner running?
How to auto type the miner1 password, I need to type it 3 times before the miner running?
No you don't, the script will do this for you. Just wait a bit and see..
Try it this morning but it's often hang, need to hard reset the whole system with +150cc and +500mc for 6x 1080ti
How to auto type the miner1 password, I need to type it 3 times before the miner running?
How to auto type the miner1 password, I need to type it 3 times before the miner running?
Hi, overclocking is just not working, either the script is corrupted or some driver version issue.
Both "individual" and "all-cards" are not getting pointed clock settings.
I'm using the image for Z270.
Both "individual" and "all-cards" are not getting pointed clock settings.
I'm using the image for Z270.
It is always possible to have a bad image. To minimize the occurance of this always wait a few seconds after imaging indicates 100% before closing the imaging program, and always ensure you eject the usb before removing it from the build computer.
Which z270 image are you using? What motherboard and cards are you using?
Let me know.
Hi,
Here is the image:
8xOC_with_first_m2_ASUS_PRIME_Z270-A__nvOC_v0014.zip
Its the only one which i found on that point for my motherboard Asus Prime Z270-P
Video cards are Asus Dual 1060 6gb.
Also i saw some answers with screenshots about adding attributes.
Well i see a few empty rows after "coolbits" commands and then miner is running. I don't see these rows with attributes.
P.S for the guys with same cards, what i found on windows is GPU clock -200 Mhz , and memory clock +850 Mhz super stable at 23 Mh/s ETH.
Awesome job fullzero...thanks so much.
I have a 5 card 1070 rig humming along on DGB. Speeds are slower though.Usually I get around 430mh on a 1070 , only getting about 275mh on nvOC.
Is there a way to adjust the intensity setting? On windows I can adjust it by adding -i 26 to the bat file.
Yes I get the best results with Alexis.
No I prefer to get the DGB converted to BTC.
I have a 5 card 1070 rig humming along on DGB. Speeds are slower though.Usually I get around 430mh on a 1070 , only getting about 275mh on nvOC.
Is there a way to adjust the intensity setting? On windows I can adjust it by adding -i 26 to the bat file.
Quote
@bentcrypto
Did you get the best results for skein with Alexis?
Do you mine DGB directly with it?
Did you get the best results for skein with Alexis?
Do you mine DGB directly with it?
Yes I get the best results with Alexis.
No I prefer to get the DGB converted to BTC.
Hi, saw the new oneBash file, V0015. Support for 12 GPU's, that would be a monsterrig 
..
About the images, is there a need to download these again? I see these have V0014 in their filename, so not sure if they're modified.
Not sure if possible, but could make your work a bit easier: Perhaps a unified image, and the files like oneBash and the different Xorg.conf files on the windows partition? At startup, copy or use the selected one. Or are there many other changes inside the image?
Another suggestion, separate the config part and the execution part in two files, the second including the first. That would make it easier to just replace the execution file when there are small changes or typo's.
You could shorten some parts like:
.. About the images, is there a need to download these again? I see these have V0014 in their filename, so not sure if they're modified.
Not sure if possible, but could make your work a bit easier: Perhaps a unified image, and the files like oneBash and the different Xorg.conf files on the windows partition? At startup, copy or use the selected one. Or are there many other changes inside the image?
Another suggestion, separate the config part and the execution part in two files, the second including the first. That would make it easier to just replace the execution file when there are small changes or typo's.
You could shorten some parts like:
Code:
if [ $MANUAL_FAN == "YES" ]
then
for f in $GPUS
do
$gpu=$((f-1))
${NVD} -a [gpu:${gpu}]/GPUFanControlState=1
${NVD} -a [fan:${gpu}]/GPUTargetFanSpeed=${FAN_SPEED}
done
fi
What is the maximum number of NVIDIA 1080 TI cards we can mine using NVOS per rig? Also what brand and version of the 1080 TI that can do 700-780 sols per 1 viewer's comment? Have the 1080 regular performance improved at all with the latest mining software or still in the 500s SOL range?
Which image can i use for an ASUS PRIME Z270-P for 7 EVGA Geforce GTX 1070 SC cards using 1 M2 PCIE??
Hey fullzero do you have an image for an asrock z97 extreme 4 mobo?
Have a 3 rig setup (2) 6 x MSI rx580's and (1) 6 X GTX1060 setup.
If you could image me a file that'd be awesome. Very much appreciated.
Have a 3 rig setup (2) 6 x MSI rx580's and (1) 6 X GTX1060 setup.
If you could image me a file that'd be awesome. Very much appreciated.
I have messaged you a link to an image that should work for the 6x 1060 rig. For the 2 6x rx580s you can try my amdOC beta if you want; the link is on the OP in red.
Great thanks man really much appreciated.
Hey fullzero do you have an image for an asrock z97 extreme 4 mobo?
Have a 3 rig setup (2) 6 x MSI rx580's and (1) 6 X GTX1060 setup.
If you could image me a file that'd be awesome. Very much appreciated.
Have a 3 rig setup (2) 6 x MSI rx580's and (1) 6 X GTX1060 setup.
If you could image me a file that'd be awesome. Very much appreciated.
First of all @fullzero - this is great and you rock! I have been using Ethos for my AMD rig/s for about a year so I've been waiting for something like this for my Nvidia rig - as I said in a post on one of the 1st pages in this thread. I really don't like Windows and always prefer a Linux option if possible. My Linux skills are basic so I am always super grateful when people like you come along and create something like nvOC to make it easy for me to get the Linux stability, etc.
My Nividia rig is currently an Asrock H81 BTC Pro running Windows 8.1 off an SSD, with 2 x Gigabyte GTX1070 G1 gaming and 2 x Galax GTX1060 6GB. I run Claymore (now up to 9.4), and use MSI Afterburner for overclocking. I currently prefer to "single" mine just ETH. I have found that I can underclock all cores to -200 and overclock memory to +750 and reach around 107mh/s for the 4 GPUs, using about 600W for the whole rig. Running all stock clocks gets me around 99-100mh/s.
Unfortunately with my first sucessful run of nvOC it appears that my desired overclocks didn't apply because it was hashing at the stock amount of aroun 99mhs. Here is the relevant (I think) part of my onebash file:
COIN="ETH"
POWERLIMIT="NO" # YES NO
INDIVIDUAL_POWERLIMIT="NO" # YES NO
#__CORE_OVERCLOCK=100
#MEMORY_OVERCLOCK=100
INDIVIDUAL_CLOCKS="YES" # YES NO
MANUAL_FAN="NO" # YES NO
# Set fan speed if MANUAL_FAN="YES"
FAN_SPEED=75
# Mine XMR with CPU
plusCPU="NO" # YES NO
# Set individual clocks here if INDIVIDUAL_CLOCKS="YES"
__CORE_OVERCLOCK_0=0
MEMORY_OVERCLOCK_0=750
__CORE_OVERCLOCK_1=0
MEMORY_OVERCLOCK_1=750
__CORE_OVERCLOCK_2=0
MEMORY_OVERCLOCK_2=750
__CORE_OVERCLOCK_3=0
MEMORY_OVERCLOCK_3=750
#__CORE_OVERCLOCK_4=100
#MEMORY_OVERCLOCK_4=100
#__CORE_OVERCLOCK_5=100
#MEMORY_OVERCLOCK_5=100
Have I done something incorrectly? My intention was to leave cores at stock frequency (though later I would try reducing them as I do using Windows/Afterburner) and overclock memory to +750 on all cards, which as I said in windows seems to reliably give me 107-108mh/s.
As I said, using the above oneBash entries - it mines fine, but at around 99mh/s so it appears that the overclocks to memory aren't applying. I will keep reading all the thread posts (I have only covered about 1/3 of them and maybe I will find the answer.
Thank you in advance for any help. I am prepared to donate or pay when you are ready to accept payment - just drop in a BTC or ETH address.
My Nividia rig is currently an Asrock H81 BTC Pro running Windows 8.1 off an SSD, with 2 x Gigabyte GTX1070 G1 gaming and 2 x Galax GTX1060 6GB. I run Claymore (now up to 9.4), and use MSI Afterburner for overclocking. I currently prefer to "single" mine just ETH. I have found that I can underclock all cores to -200 and overclock memory to +750 and reach around 107mh/s for the 4 GPUs, using about 600W for the whole rig. Running all stock clocks gets me around 99-100mh/s.
Unfortunately with my first sucessful run of nvOC it appears that my desired overclocks didn't apply because it was hashing at the stock amount of aroun 99mhs. Here is the relevant (I think) part of my onebash file:
COIN="ETH"
POWERLIMIT="NO" # YES NO
INDIVIDUAL_POWERLIMIT="NO" # YES NO
#__CORE_OVERCLOCK=100
#MEMORY_OVERCLOCK=100
INDIVIDUAL_CLOCKS="YES" # YES NO
MANUAL_FAN="NO" # YES NO
# Set fan speed if MANUAL_FAN="YES"
FAN_SPEED=75
# Mine XMR with CPU
plusCPU="NO" # YES NO
# Set individual clocks here if INDIVIDUAL_CLOCKS="YES"
__CORE_OVERCLOCK_0=0
MEMORY_OVERCLOCK_0=750
__CORE_OVERCLOCK_1=0
MEMORY_OVERCLOCK_1=750
__CORE_OVERCLOCK_2=0
MEMORY_OVERCLOCK_2=750
__CORE_OVERCLOCK_3=0
MEMORY_OVERCLOCK_3=750
#__CORE_OVERCLOCK_4=100
#MEMORY_OVERCLOCK_4=100
#__CORE_OVERCLOCK_5=100
#MEMORY_OVERCLOCK_5=100
Have I done something incorrectly? My intention was to leave cores at stock frequency (though later I would try reducing them as I do using Windows/Afterburner) and overclock memory to +750 on all cards, which as I said in windows seems to reliably give me 107-108mh/s.
As I said, using the above oneBash entries - it mines fine, but at around 99mh/s so it appears that the overclocks to memory aren't applying. I will keep reading all the thread posts (I have only covered about 1/3 of them and maybe I will find the answer.
Thank you in advance for any help. I am prepared to donate or pay when you are ready to accept payment - just drop in a BTC or ETH address.
Glad you like nvOC.
When oneBash starts do you see messages like this:
for each card?
If you want to apply the same OC to all the cards then change this area to:
INDIVIDUAL_POWERLIMIT="NO" # YES NO
#__CORE_OVERCLOCK=0
#MEMORY_OVERCLOCK=750
INDIVIDUAL_CLOCKS="NO" # YES NO
If you want to give different OC values to different cards do the following:
make sure: INDIVIDUAL_CLOCKS="YES" # YES NO
When using less than the maximum number of cards with a motherboard, the system may not index the cards in the order you expect. To see how they are indexed:
press f12 to open the guake terminal. If you are running cpuminer right click over the terminal and select new tab or press ctrl + c to stop the mining process. Then type:
nvidia-smi
This will list your cards with index numbers. Use them to match the card with the correct individual index OC area:
__CORE_OVERCLOCK_0=100
MEMORY_OVERCLOCK_0=100
__CORE_OVERCLOCK_1=100
MEMORY_OVERCLOCK_1=100
__CORE_OVERCLOCK_2=100
MEMORY_OVERCLOCK_2=100
__CORE_OVERCLOCK_3=100
MEMORY_OVERCLOCK_3=100
__CORE_OVERCLOCK_4=100
MEMORY_OVERCLOCK_4=100
__CORE_OVERCLOCK_5=100
MEMORY_OVERCLOCK_5=100
Let me know.
I really do like the idea of nvOC - I just wish I could get it to work for me!
This time I used this edit of onebash:
COIN="ETH"
POWERLIMIT="NO" # YES NO
INDIVIDUAL_POWERLIMIT="NO" # YES NO
__CORE_OVERCLOCK=-150
MEMORY_OVERCLOCK=750
INDIVIDUAL_CLOCKS="NO" # YES NO
MANUAL_FAN="NO" # YES NO
# Set fan speed if MANUAL_FAN="YES"
FAN_SPEED=75
# Mine XMR with CPU
plusCPU="NO" # YES NO
# Set individual clocks here if INDIVIDUAL_CLOCKS="YES"
__CORE_OVERCLOCK_0=-150
MEMORY_OVERCLOCK_0=750
__CORE_OVERCLOCK_1=-150
MEMORY_OVERCLOCK_1=750
__CORE_OVERCLOCK_2=-150
MEMORY_OVERCLOCK_2=750
__CORE_OVERCLOCK_3=-150
MEMORY_OVERCLOCK_3=750
__CORE_OVERCLOCK_4=-150
MEMORY_OVERCLOCK_4=750
__CORE_OVERCLOCK_5=-150
MEMORY_OVERCLOCK_5=750
I'm not sure why but when the terminal starts it usually asks me for the "miner1" password multiple times. When it does get started this time, GPU1 is disabled completely and the other cards are still running without any of the overclocks I have specified. Also it always seems to fail making the initial connection to the pool and waits for 10 secs then connects fine, I did see the messages you asked about applying values to different things but they just don't seem to "stick".
I tried nvidia-smi after hitting F12 and the GPUs are indexed exactly the same as when I run Windows: GPU0 is 1070 GPU1 is 1060 GPU2 is 1060 GPU3 is 1070
I'm not sure if this makes any difference but I am using an adapter which is a USB 3 adapter/connection to an old 64GB mini SSD card. Will it work better using an actual USB stick? Why does this make any difference?
This is the error im getting after just enabling the ETC mine and its options
Code:
/media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eu1-etc.ethermine.org removed from the list
and this is after addingg "-allpools 1"
Code:
/media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6071 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <0.0.0.0> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Share rejected!
ETH: Job timeout, disconnect, retry in 20 sec...
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
Thanks in advance
Sorry about that, I should have tested the ETC coin choices after I modified them; I had left a space in each ... Fail on my part.
I have updated the newest oneBash link and it should work now.
Just Updated it and tried and still there is another error
Code:
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6071 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Authorized
Setting DAG epoch #128...
Reloading epools.txt
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
ETH: Connection lost, retry in 20 sec...
Reloading epools.txt
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
Reloading epools.txt
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
Setting DAG epoch #128 for GPU #0
Create GPU buffer for GPU #0
GPU 0 DAG creation time - 8686 ms
Setting DAG epoch #128 for GPU #0 done
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Authorized
ETH: Connection lost, retry in 20 sec...
GPU0 t=54C fan=34%
I just tested it with your pool: eu1-etc.ethermine.org:4444
worked for me
this error:
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
will always occur unless I change a link: it is irrelevant.
I am guessing you added:
-allpools 1
as an argument when calling Claymore
this is likely the problem. It is not needed for ETC, and perhaps (if this is indeed what you changed) makes it not work.
just did that and its WORKING , Finally
Thanks a million for your patience and help, the time you put into this to make our life easier and our wallets heavier
im using asus dual gtx 1060 6gb
any idea regarding what to put in the overclock part , i dont understand how it calculated or done to be honest
This is the error im getting after just enabling the ETC mine and its options
Code:
/media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eu1-etc.ethermine.org removed from the list
and this is after addingg "-allpools 1"
Code:
/media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6071 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <0.0.0.0> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Share rejected!
ETH: Job timeout, disconnect, retry in 20 sec...
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
Thanks in advance
Sorry about that, I should have tested the ETC coin choices after I modified them; I had left a space in each ... Fail on my part.
I have updated the newest oneBash link and it should work now.
Just Updated it and tried and still there is another error
Code:
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6071 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Authorized
Setting DAG epoch #128...
Reloading epools.txt
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
ETH: Connection lost, retry in 20 sec...
Reloading epools.txt
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
Reloading epools.txt
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
Setting DAG epoch #128 for GPU #0
Create GPU buffer for GPU #0
GPU 0 DAG creation time - 8686 ms
Setting DAG epoch #128 for GPU #0 done
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Authorized
ETH: Connection lost, retry in 20 sec...
GPU0 t=54C fan=34%
Is it possible to enable API? I'm trying to setup a remote monitoring system but am having trouble figuring out how to enable the API. New to Linux here so please forgive me if this is a very basic Linux solution.
in the ZEC section of oneBash apx line 811:
if [ $COIN == "ZEC" ]
then
HCD='/home/m1/zec/miner'
ZECADDR="$ZEC_ADDRESS.$ZEC_WORKER"
until $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZEC_POOL --user $ZECADDR --pass z --port $ZEC_PORT;
do
echo "FAILURE; reinit in 5" >&2
sleep 5
done
fi
change this line:
until $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZEC_POOL --user $ZECADDR --pass z --port $ZEC_PORT;
to:
until $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZEC_POOL --user $ZECADDR --pass z --port $ZEC_PORT --api;
this will for the EWBF default: 127.0.0.1:42000,
to make it for a different listen address use:
until $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZEC_POOL --user $ZECADDR --pass z --port $ZEC_PORT --api 0.0.0.0:12345;
where: 0.0.0.0:12345 is desiredIP:desiredPort
IMO the EWBF api is not the greatest; but the client is very stable so api is not really very important.
If you are not very knowledgeable with linux or in general with networking I would recommend using a pool that gives you stats / notifications as well:
nanopool.org or slushpool.com will do this.
AWESOME!!!! Thank you so much!!!
Quote
I don't do the best job of tracking every coin, and I haven't mined Skein myself.
If it uses an algorithm supported by ccminer then you should be able to mine it with nvOC. It most likely has a specific fork which performs better. If you find me the link to the clients repo and tell me what pool you want to / do use to mine skein, then I can add the client and modify oneBash for the next version.
If it uses an algorithm supported by ccminer then you should be able to mine it with nvOC. It most likely has a specific fork which performs better. If you find me the link to the clients repo and tell me what pool you want to / do use to mine skein, then I can add the client and modify oneBash for the next version.
In windows I use the alexis78 version from nemo's miner and I mine at Z-pool
My batfile looks like this :
Code:
ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u BTC ADDDRESS -p c=BTC
https://github.com/alexis78/ccminer
Skein is paying really well atm...$23/1080ti/day
that 1080ti beats a S9 any day
@fullzero
I haven't had time to play much with it yet, will report later.
- I added DGB to onebash (ccminer -a skein). I don't know if the OC works (fan speed is not fixed even if defined), if need to launch instances, or if SPccminer is slow, I get a higher hashrate with this ccminer version for now (https://github.com/tpruvot/ccminer).
Could you add this miner or the fastest skein version (alexis maybe)? And the DGB coin option.
You might want to look into skein for your Nv
- You might want to launch onebash inside a screen to monitor it remotely.
(https://www.gnu.org/software/screen/manual/screen.html)
and a ssh server (disabled by default)
- Maybe Enable automatic security updates
- I got a module error trying to upgrade (kernel)
- I will try to put it on SSD as upgrading is slow
@bentcrypto
Did you get the best results for skein with Alexis?
Do you mine DGB directly with it?
I haven't had time to play much with it yet, will report later.
- I added DGB to onebash (ccminer -a skein). I don't know if the OC works (fan speed is not fixed even if defined), if need to launch instances, or if SPccminer is slow, I get a higher hashrate with this ccminer version for now (https://github.com/tpruvot/ccminer).
Could you add this miner or the fastest skein version (alexis maybe)? And the DGB coin option.
You might want to look into skein for your Nv
- You might want to launch onebash inside a screen to monitor it remotely.
(https://www.gnu.org/software/screen/manual/screen.html)
and a ssh server (disabled by default)
- Maybe Enable automatic security updates
- I got a module error trying to upgrade (kernel)
- I will try to put it on SSD as upgrading is slow
@bentcrypto
Did you get the best results for skein with Alexis?
Do you mine DGB directly with it?
I updated the newest oneBash link on the OP. It now supports both ETHERMINEdotORG for ETC as well as ETH and I added a DGB coin selection.
I used your pool / options bentcrypto: for a DGB address you are actually using a BTC address with zpool.
peonv I tested both the SP and TP forks with DGB and I agree the TP is faster so it is what I set oneBash to use.
I didn't enable updates as they will slow down mining, I have and plan to continute to update nvOC frequently. I download and install updates for each version. The last image I made already has:
disabled password lockout
thread number selection option for cpuminer-opt
added screen and openssh-server
I will add the alexis fork to the next version (which will be soon)
In regards to using vanilla methods to update the system; they may not work due to changes I have made. nvOC is a full install, but has system files for all common chipsets.
This is the error im getting after just enabling the ETC mine and its options
Code:
/media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eu1-etc.ethermine.org removed from the list
and this is after addingg "-allpools 1"
Code:
/media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6071 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <0.0.0.0> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Share rejected!
ETH: Job timeout, disconnect, retry in 20 sec...
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
Thanks in advance
Guys, I have a question regarding the VGA, yesterday I moved my rig to the new location and assemble it again, but stupid me I somehow put the usb riser for the 7th card like this
https://i.imgur.com/xaRw3nll.jpg
The small port of usb riser was connected to the wrong port on MOBO, when the wide port of riser connect to nothing.
And then I boot the rig with nvOC, of course it only recognize 6 cards, I checked and saw what I did and I immediately shut down the rig and put the usb riser in the correct port. However from that time my rig can not recognize that specific GPU. I tried to:
- Unplug all others GPU and use only that GPU but the window or linux can not recognize it
- Install driver but it does not help too.
- I plug the HDMI cable from the monitor to the gpu, but it does not help.
- Plug the gpu to another working rig, but it does not help.
The GPU fan and led is still running as normal, there is no smell. But I wonder if I accidentally shorted my card? Sadly it seems the warranty will be voided if the card is fried or shorted.
I know it is not related to nvOc, but I see people here very responsive to any questions, so I really appreciate your help.
The card is Galax 1080ti 11GB
https://i.imgur.com/xaRw3nll.jpg
The small port of usb riser was connected to the wrong port on MOBO, when the wide port of riser connect to nothing.
And then I boot the rig with nvOC, of course it only recognize 6 cards, I checked and saw what I did and I immediately shut down the rig and put the usb riser in the correct port. However from that time my rig can not recognize that specific GPU. I tried to:
- Unplug all others GPU and use only that GPU but the window or linux can not recognize it
- Install driver but it does not help too.
- I plug the HDMI cable from the monitor to the gpu, but it does not help.
- Plug the gpu to another working rig, but it does not help.
The GPU fan and led is still running as normal, there is no smell. But I wonder if I accidentally shorted my card? Sadly it seems the warranty will be voided if the card is fried or shorted.
I know it is not related to nvOc, but I see people here very responsive to any questions, so I really appreciate your help.
The card is Galax 1080ti 11GB
Sucks when things like this happen.
Your card may still be able to be RMAed.
Thanks for warning others to ensure pcie connectors are correct before powering on: you are not the first person to do this.
On the plus side it looks like you are using a custom frame.
I will bring the card to the retailer tomorrow to see if it can be RMA, I hope they are ok with it. At first I thought the usb 3.0 only transfer the data, the power riser cable will handle the electricity, but I was so wrong, lol.
Jump to: