Pages:
Author

Topic: [MINING POOL] pool.sexy - Low Fee - tx fee paid to miners - page 16. (Read 61975 times)

legendary
Activity: 1250
Merit: 1004
pool.sexy
finally dbix3 got lucky!!... or so I think ha

yep...damn round  Cheesy
newbie
Activity: 3
Merit: 0
finally dbix3 got lucky!!... or so I think ha
legendary
Activity: 1250
Merit: 1004
pool.sexy
however when today I kept it on dbix1 for about an hour and a half and didnt get update

Because network is slow....we need hours for 20 confirmations at the moment ...(20 blocks in the last 2 hours..)

Quote
what is the usual payout during block reward for someone with about 1% round share?

1% of block + tx fee which contains (without 0.25% pool fee)
newbie
Activity: 3
Merit: 0
Yes I noticed that, yesterday my rig crashed couple of times while I was handling it virtually as the voltage kept increasing, but in about 10-15 mins I was able to receive 0.002 which is pretty good, however when today I kept it on dbix1 for about an hour and a half and didnt get update, I got a bit disheartened and starting checking everywhere for answers when i read this forum thoroughly!

Sorry for the noob question but what is the usual payout during block reward for someone with about 1% round share?
legendary
Activity: 1250
Merit: 1004
pool.sexy
I switched over to dbix3 and have been mining for a lil over two hours and I pretty much see zero's all along the left side of my UI. It does however tell me that I currently have 0.5% round share, so does that mean finally when the block is mined I would be receiving 0.5% of the total block reward?

Thanks once again for being as responsive and helping out on here.

Welcome,
 
unlcuky round on dbix3 (last block found 8 hours ago  Lips sealed ) patience pls, when a block is found after 20 confirmations is possible see your rewards  Wink

Quote
Secondly while on dbix3 I notice every now and then I'm knocked off the pool. The miner thread hangs or I receive no jobs for over 10 mins till I move over the failover. Is there an issue going on dbix3 and should switch.

Because at the moment network dbix is very slowly, start claymore with "-ejobtimeout 60"


Anyway also dbix1 is profitable it all depends on luck  Wink
newbie
Activity: 3
Merit: 0
Hi @Warnier,

Firstly thank you for the platform.
Just got on Pool.sexy today.

Just a couple of queries,

Firstly I tried my hand on pool 1, not knowing, (being a noob), it wasnt the best for my measly 180MH/s hashrate. I switched over to dbix3 and have been mining for a lil over two hours and I pretty much see zero's all along the left side of my UI. It does however tell me that I currently have 0.5% round share, so does that mean finally when the block is mined I would be receiving 0.5% of the total block reward?

Secondly while on dbix3 I notice every now and then I'm knocked off the pool. The miner thread hangs or I receive no jobs for over 10 mins till I move over the failover. Is there an issue going on dbix3 and should switch.

Thanks once again for being as responsive and helping out on here.
legendary
Activity: 1250
Merit: 1004
pool.sexy
http://eth.pool.sexy/#/account/0xaa0f63f3d5559e9e93e3146e8bbfb192ffdeb608

i cant see any payment info. how can i see when make payments?

First we need to found 1 block  Wink no block no rewards
newbie
Activity: 24
Merit: 0
http://eth.pool.sexy/#/account/0xaa0f63f3d5559e9e93e3146e8bbfb192ffdeb608

i cant see any payment info. how can i see when make payments?
legendary
Activity: 1250
Merit: 1004
pool.sexy
you have several messages please its urgent


Hi, I see your messages but I have a lot of work...I can not make you the pool
But I appreciate your request Smiley
jr. member
Activity: 408
Merit: 3
Anyone got etheminer running on dbix? What's your bat scripts look like.?

yes work
ethminer -F http://dbix.pool.sexy:7777/YOUR_DBIX_ADDRESS/myfarm -G --farm-recheck 200.


you have several messages please its urgent
newbie
Activity: 22
Merit: 0
-ewal 0x92376b28774f7b8b459e26439942d72acdf19484

I check log file...I'm not found any shares sent from your address.

Reduce your worker name (worker name MAX LENGHT 8 characters)

When you sent 1 shares is possible see your stats page
thx for reply, i changed worker name and get 81 shares, but nothing changed!

I just tested pointing to your wallet, with slave1 as worker's name
http://dbix.pool.sexy/#/account/0x92376b28774f7b8b459e26439942d72acdf19484

The pool works from here, indonesia. The problem is at your system
Thank you for your help, i'll double check my system
legendary
Activity: 1250
Merit: 1004
pool.sexy
newbie
Activity: 28
Merit: 0
-ewal 0x92376b28774f7b8b459e26439942d72acdf19484

I check log file...I'm not found any shares sent from your address.

Reduce your worker name (worker name MAX LENGHT 8 characters)

When you sent 1 shares is possible see your stats page
thx for reply, i changed worker name and get 81 shares, but nothing changed!

I just tested pointing to your wallet, with slave1 as worker's name
http://dbix.pool.sexy/#/account/0x92376b28774f7b8b459e26439942d72acdf19484

The pool works from here, indonesia. The problem is at your system
legendary
Activity: 1250
Merit: 1004
pool.sexy
thx for reply, i changed worker name and get 81 shares, but nothing changed!

Most likely something with your configuration does not work, immediately afterwards 1 shares is possible see your stats page..

Try to another pool, dbix2 or 3 for test
newbie
Activity: 22
Merit: 0
-ewal 0x92376b28774f7b8b459e26439942d72acdf19484

I check log file...I'm not found any shares sent from your address.

Reduce your worker name (worker name MAX LENGHT 8 characters)

When you sent 1 shares is possible see your stats page
thx for reply, i changed worker name and get 81 shares, but nothing changed!
legendary
Activity: 1250
Merit: 1004
pool.sexy
-ewal 0x92376b28774f7b8b459e26439942d72acdf19484

I check log file...I'm not found any shares sent from your address.

Reduce your worker name (worker name MAX LENGHT 8 characters)

When you sent 1 shares is possible see your stats page
newbie
Activity: 22
Merit: 0
Hi admin, my 360mhs rig mining dbix for 3hours, and when i paste wallet address on pool to show stat, the page show "NO ACCOUNT DATA AVAILABLE"
is there something wrong?

You know, for every question like this, people should really post their batfiles.
my config.txt in claymore v9.7
Quote
# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# WARNING! Miner loads options from this file only if there are not any options in the command line!
-epool dbix.pool.sexy:7007
-ewal 0x92376b28774f7b8b459e26439942d72acdf19484
-eworker vuquanict2
-ttli 75
-r 1
-allpools 1
-mode 1
newbie
Activity: 28
Merit: 0
Hi admin, my 360mhs rig mining dbix for 3hours, and when i paste wallet address on pool to show stat, the page show "NO ACCOUNT DATA AVAILABLE"
is there something wrong?

You know, for every question like this, people should really post their batfiles.
newbie
Activity: 22
Merit: 0
Hi admin, my 360mhs rig mining dbix for 3hours, and when i paste wallet address on pool to show stat, the page show "NO ACCOUNT DATA AVAILABLE"
is there something wrong?
legendary
Activity: 1250
Merit: 1004
pool.sexy
Anyone got etheminer running on dbix? What's your bat scripts look like.?

yes work
ethminer -F http://dbix.pool.sexy:7777/YOUR_DBIX_ADDRESS/myfarm -G --farm-recheck 200.

Thankyou Bro, Im rocking using this, it is faster then CM 9.7

-F http://dbix.pool.sexy:7777/0x$walletETH/$rigName -U --farm-recheck 2000 --cuda-parallel-hash 4 --cuda-streams 4

Im still playing with the cuda bits(As I dont have a clue of the effect....)...but hay thats the joy of doing this!

try (-FS pool backup)

 ethminer -G -SP 1 -S dbix.pool.sexy:7007 -FS dbix2.pool.sexy:7007 -O YOUR_DBIX_ADDRESS.RIG_ID --farm-recheck 200.
Pages:
Jump to: