Pages:
Author

Topic: [MINING POOL] pool.sexy - Low Fee - tx fee paid to miners - page 32. (Read 62026 times)

hero member
Activity: 2548
Merit: 626
just switched my ubiq machines to your pool Smiley
legendary
Activity: 1255
Merit: 1004
pool.sexy
newbie
Activity: 14
Merit: 0
Any ideas what this might be:
http://clickahost.com/images/pool-error.png


Try with pool IP instead eth-eu.pool.sexy

Tried with Pool IP. Same error.
When i press "e" though and select 1 (Same pool settings) it connects straight up.
I strongly believe something wrong with my config for this pool (See below config -> Cant see what's wrong there)

-------------------
-epool 91.121.66.5:9009
-ewal MYWALLETXXXXX
-eworker MINERXXXXX
-epsw x
-dpool stratum+tcp://decred.eu.nicehash.com:3354
-dwal BTCWALLETXXX
-dpsw x
-esm 1
-mode 0
-tt 72
-etha 0
-etht 1000
-dcri 18
-ftime 0
-allcoins 1
---------------------------



Also, i've been on the pool for 2 days straight with a 168MH rig, i get a very low average, lots of shares rejected , no balance... and then i see this:
http://clickahost.com/images/pool-error2.png

while miner is issuing shares succesfully on pool (1second ago) it reports no jobs from pool for over 15 min???
legendary
Activity: 1255
Merit: 1004
pool.sexy
Any ideas what this might be:



Try with pool IP instead eth-eu.pool.sexy
legendary
Activity: 1255
Merit: 1004
pool.sexy
Info PORT nicehash and for big miners on pplns pools
Normal port diff share 2G = 1 share - 1 share registered for reward
Nicehash port diff share 6G = 1 share - 3 share registerd for reward

I have tried to make a new pool in Nicehash, but see (when making a pool verification) the message:
 Pool host: ubq.pool.sexy
Pool port: 9019
Pool user: worker1
Pool pass: #
Algorithm: DaggerHashimoto

Resolving pool host ubq.pool.sexy... OK
Establishing connection with proxy... OK
Establishing connection with pool 37.59.45.57:9019... OK
Sending eth_submitLogin... OK
Error: null

Please check, what the problem?

P.S. If i change the password to "x", i see in the last string: "connection reset".

Hi. Port nicehash works dont worry. Use password #
newbie
Activity: 3
Merit: 0
Info PORT nicehash and for big miners on pplns pools
Normal port diff share 2G = 1 share - 1 share registered for reward
Nicehash port diff share 6G = 1 share - 3 share registerd for reward

I have tried to make a new pool in Nicehash, but see (when making a pool verification) the message:
 Pool host: ubq.pool.sexy
Pool port: 9019
Pool user: worker1
Pool pass: #
Algorithm: DaggerHashimoto

Resolving pool host ubq.pool.sexy... OK
Establishing connection with proxy... OK
Establishing connection with pool 37.59.45.57:9019... OK
Sending eth_submitLogin... OK
Error: null

Please check, what the problem?

P.S. If i change the password to "x", i see in the last string: "connection reset".
newbie
Activity: 14
Merit: 0
sr. member
Activity: 283
Merit: 250
UPDATE:

After 12 hrs, hashrate avg has stabilized at around 155MH, which is far better than any other pool i've tried. Great stuff.

On another note, i know how things work in mining so the following wouldn't affect me. However, you should consider updating the  Pending Balance more often (As often as possible actually - even with estimates) if you wanna keep the small miners onboard. Picture it this way, if i'm just a newbie to mining and i switch on my hashrates to pool.sexy, i'll be on the stats page every 5 minutes to see my balance!!! If i don't see anything, i'll either leave or start asking questions!!!

P.S. How often does the pending balance get updated anyways? Wink


I have been here for a good while and sexy is by far the best I have found. You will not find better customer service either. Balance is updated as soon as block is found. Times will always vary depending on luck of course. Newbie miners are impatient as am I. I still check my balances quite often. But you should understand that mining is based solely on luck and when the pool finds a block. You could find two blocks back to back with in just a few minutes and then wait a whole day to find another. In the end it will usually balance out. Just be patient and watch the money pile up. Smiley
newbie
Activity: 14
Merit: 0
UPDATE:

After 12 hrs, hashrate avg has stabilized at around 155MH, which is far better than any other pool i've tried. Great stuff.

On another note, i know how things work in mining so the following wouldn't affect me. However, you should consider updating the  Pending Balance more often (As often as possible actually - even with estimates) if you wanna keep the small miners onboard. Picture it this way, if i'm just a newbie to mining and i switch on my hashrates to pool.sexy, i'll be on the stats page every 5 minutes to see my balance!!! If i don't see anything, i'll either leave or start asking questions!!!

P.S. How often does the pending balance get updated anyways? Wink

newbie
Activity: 14
Merit: 0
Oi mate.

Project looks good.
Switched one of my miners onto eth pool to try out. eth-eu closes socket, rest worked.

If all goes well, i ll switch more of the mine towards this Wink

However, i wanna see some results first. Currently i got a 168MH rig and only reporting 100-120MH avg (Not so good). Of course it's only been a couple hrs so we'll see.

Any tips?
legendary
Activity: 1255
Merit: 1004
pool.sexy
added pool Zencash (ZEN)
zen.pool.sexy
legendary
Activity: 1134
Merit: 1001
Im on http://zen.pool.sexy with Nvidia rig 1070 and ewbf miner , very good and work perfectly! finally , CMON ZEN to da moon!!! .

miner --server zen.pool.sexy --user ADDRESS ZEN --pass x --port 8888
pause

.
newbie
Activity: 3
Merit: 0
Hmm, too few picks @eth.pool.sexy  - I'm stepping in with 30% of my current hack-power Smiley and will move entirelly if everything is going smoothly.
However, more miners would be great!
legendary
Activity: 1255
Merit: 1004
pool.sexy
pool ETHEREUM eth.pool.sexy

Now fee 0% until the 31/05/2017
newbie
Activity: 9
Merit: 0
nice.

now pls stop wrong address and start correct wallet with wokername

start

Ok, I transferred your shares to your correct address and deleted your wrong address

t1bV8sZM88D7jZUpVbQgkXDd8gCDgwpBdAi
Your Round Share: 21.993412%

thank you very much for your help in solving the problem
legendary
Activity: 1255
Merit: 1004
pool.sexy
nice.

now pls stop wrong address and start correct wallet with wokername

start

Ok, I transferred your shares to your correct address and deleted your wrong address

t1bV8sZM88D7jZUpVbQgkXDd8gCDgwpBdAi
Your Round Share: 21.993412%
legendary
Activity: 1255
Merit: 1004
pool.sexy
nice.

now pls stop wrong address and start correct wallet with wokername

start

good, now stop all miner
newbie
Activity: 9
Merit: 0
nice.

now pls stop wrong address and start correct wallet with wokername

start
legendary
Activity: 1255
Merit: 1004
pool.sexy
nice.

now pls stop wrong address and start correct wallet with wokername
newbie
Activity: 9
Merit: 0
help please.
I made a mistake and used the zec (t1JAy3vXoef9Ncx8NniuU1CiyEYgKeq6pn9) wallet instead of zcl (t1bV8sZM88D7jZUpVbQgkXDd8gCDgwpBdAi). Is it possible to fix it. There is no payment yet/

Yes, I can edit it in the database.

Wrong wallet is t1JAy3vXoef9Ncx8NniuU1CiyEYgKeq6pn9?
and correct ZCL is t1bV8sZM88D7jZUpVbQgkXDd8gCDgwpBdAi?

To be sure the wallet is yours, start your wrong wallet (t1JAy3vXoef9Ncx8NniuU1CiyEYgKeq6pn9) with workername "wrong" pls.

And contact me on telegram pls

I start 1 rig
Pages:
Jump to: