Spoke too soon. It is not BSOD'ing that much is confirmed. Trying again with slightly lower OC settings.
I have been successful at 980mhz for about 48hrs now. Just a heads up.
Topic: Mining w/ two 5830s reboots system - page 2. (Read 2423 times)
I have been successful at 980mhz for about 48hrs now. Just a heads up.
Spoke too soon. It is not BSOD'ing that much is confirmed. Trying again with slightly lower OC settings.
You might want to try installing GPU-Z and use the logging to file function. And see if it's overheating or it's some other instability such as malfunctioning PSU, what brand/model is it anyway?
Spoke too soon. It is not BSOD'ing that much is confirmed. Trying again with slightly lower OC settings.
Have you tried running them without the overclock? maybe it's not the overclock.
Spoke too soon. It is not BSOD'ing that much is confirmed. Trying again with slightly lower OC settings.
Well things seem to be stable for now... I had a duplicate worker name configured for one of these cards with my other rig. Would that cause this reboot issue? That would make sense as I don't think this was a BSOD crash.
I had similar issues with 11.6b and also couldnt OC as high as with 11.6. Try 11.6 if that works better for you.
Found the disable ULPS in the Trixx settings + set my system to not restart on failure. Will try that and then will try lowering the OC.
Thanks for the replies.
Thanks for the replies.
It didnt seem to matter how much OC'ing I was doing but I will try it again now at a lower setting.
I had this same issue only difference was I was using a 700W. You might be OCing to high. Some people can go over 1000 on the 5830 with stock voltage some can't. I am stable at 980 at the moment.
Make sure you selected "Disable ULPS" Also, set your far up higher if you see temps above 74+. Any more help needed, pm me. I have time today.
When you say it reboots do you mean it blue screens then reboots? If thats the case look at the minidump file.
I have a Win 7 rig with two 5830s. If I mine them at the same time, it works for a random period of time and then reboots. I'm OC'ing with Trixx, heat is not an issue. 600W PSU. One card in a 16x slot one in a 1x with the cablesarus riser cable with the Molex.
I've tried different gui miners to no avail. Upgraded the drivers to 11.6b. Doesn't seem to help.
I've tried different gui miners to no avail. Upgraded the drivers to 11.6b. Doesn't seem to help.
Jump to: