Pages:
Author

Topic: Mining without extra fans (Read 2968 times)

newbie
Activity: 36
Merit: 0
June 19, 2011, 06:06:40 PM
#33
Posted somewhere else allready, but may be useful for you. I have my case open and clipped something like this next to it
http://www.amazon.com/Holmes-HACP7W-UC-7-Inch-Clip-Personal/dp/B00006WNO4
They sell biger ones in Hornbach for about 4EUR in CZ, maybe in Germany too. Not as noisy as cheap PC fans at same effect Smiley
newbie
Activity: 44
Merit: 0
June 19, 2011, 09:14:52 AM
#32
Me trying to reassemble a GPU is quite.. dangerous? Cheesy

I'm happy my CPU is running with my coating...
member
Activity: 78
Merit: 10
June 19, 2011, 05:33:59 AM
#31
You could try with a more massive copper block and/or liquid metal as heat conducting paste. But be careful with the stuff it is quite nasty and can cause shorts if you use too much.
newbie
Activity: 44
Merit: 0
June 19, 2011, 04:14:26 AM
#30
Yeah, I know. I installed only one 8mm fan to let out the air, but my Card crashed when the case was open, and a table fan (approx 1 foot) was cooling the card. It got 95° hot and died out. So we got a Card that's too hot, even with unusual cooling AND a Case that has bad airflow.

Trying to get another card and getting more fans.
sr. member
Activity: 282
Merit: 250
June 18, 2011, 09:16:32 PM
#29
I think you should take some pictures of inside your case to show us how your setup. It really seems like your lacking proper airflow...
newbie
Activity: 44
Merit: 0
June 18, 2011, 04:39:42 PM
#28
So , maybe I wanna try undervolting next. Afterburner doesn't work with voltage on non-msi products, so I have to go to the BIOS. Any help with that?

On other notes, the GPU crashed with 95°C and wouldnt work anymore, so I installed my old e-geforce GTS 8800, which runs at ~ caution ~

80°C standby and 100° mining 21 mhs. And this thing won't die!

This seems a lot like a bad-airflow area, but I installed a 8mm fan, letting some air out and when my 5870 crashed, the case was opened and a normal sized table-fan was letting the air either against or away from the card (tested both, no real differences).

How do I add more fans with only 2 basic fan-pins on the motherboard?


Boy, when I'm finished twerking that card, difficulty is 2 steps up...
newbie
Activity: 44
Merit: 0
June 18, 2011, 12:36:21 AM
#27
btw, rhats my fan design for now.
-----  Card
 [ /|\ ] - Fan        Actual Setup (Open Case, Fan blowing into the pc, under the card)



close setup is


[ <- ] Fan

----- Graphics Card

---- Sound Card            This setup is with case closed, blwoing air out of the rear.

hero member
Activity: 826
Merit: 518
June 17, 2011, 07:42:09 PM
#26
Try if you can get your hands on a beQuiet PWM/USC SilentWings Fan. They are engineered in Germany and are the best I ever had. I mean these badboys are completely coated in rubber! oO


Q: Would you position a fan to blow between the GPUs from the Top or from behind in direction of the caseslots?

doggy style:

||
||
^

or on the top:

||
x
||
newbie
Activity: 44
Merit: 0
June 17, 2011, 05:18:57 PM
#25
GPU Fan is running, Heatsink seems to be adjusted properly. I actually have to underclock this card to use it for mining.

I'm trying to bring them back into the store and get a replacement if the sink's alright. Thanks
legendary
Activity: 2408
Merit: 1009
Legen -wait for it- dary
June 17, 2011, 05:10:33 PM
#24
I got a fan doing 1500 RPM. I installed it in the mid-rear and it does like, nothing. CPU and stuff seems 2° colder but thats all.

If I'm running guiminer I get 110°C and the system crashes.

Looks like a broken card...
Try re-seating the HSF, and use good TIM!
Unless you have 100°F ambient temps, there is no reason why any card should be running that hot at stock voltage! If you are excessively OCed, there is your problem! If not, it sounds to me like the HSF is not FLAT on the GPU die, or your GPU fan died!
member
Activity: 78
Merit: 10
June 17, 2011, 02:55:07 PM
#23
I run my single-6990 miner with the case open and a big AC room fan pointed at the whole shebang. It is A LOT less noisy that way.
newbie
Activity: 44
Merit: 0
June 17, 2011, 02:37:34 PM
#22
I opened the case earlier and pointed the fan to it, I could get about 89° on 370mh/s if I remember right. Now with closed case and the fan in the rear to let the air flow out the box I get my 99+ again..

avtually running 200mh/s at memory 180 and clock 459, at 88°C. Case closed (what a pun.)





@Ognasty: how do you get 8 of them into your pc? show me a pic? where do you get the electricity from?


I guess I'm letting the pc run even lower at night and buying a second fan tomorrow morning.


Btw, I'm from germany, I won't buy anything at newegg because it's... well, shipping costs?

Btw got a Papst Fan for 12€.
newbie
Activity: 70
Merit: 0
June 17, 2011, 10:16:48 AM
#21
Simple test to see if the heat is due to the lack of fans, or the video card:

1. Open the case.
2. Point a box fan next to the case, and crank it up.
3. Try to mine.

If you are still experiencing 90+, it's the card. I had an 8800gt that was brand new and would overheat very quickly - I got it RMA'd, and the new one has been working fine for years.
donator
Activity: 4760
Merit: 4323
Leading Crypto Sports Betting & Casino Platform
June 17, 2011, 10:10:26 AM
#20
For the love of god man, buy a fan!  I have 8 of them in my case and I'm still worried about my 75 C temperature.  If you're running at 98 C, you won't be for long.  A fan is cheaper than a new GPU.  You can get a good one from newegg.com for $10.
newbie
Activity: 44
Merit: 0
June 17, 2011, 09:56:22 AM
#19
I got a fan doing 1500 RPM. I installed it in the mid-rear and it does like, nothing. CPU and stuff seems 2° colder but thats all.

If I'm running guiminer I get 110°C and the system crashes.

Looks like a broken card...
legendary
Activity: 2408
Merit: 1009
Legen -wait for it- dary
June 17, 2011, 09:47:21 AM
#18
This HDD can't be 108°C because it feels to cold.

But my GPA is hot in stand-by. 60°C and I can feel the heat on the card.


Yes it was used, but it was very clean. Didn't notice any dust  (didnt look that much, but you know..). May it be returned because it was too hot? I bought it as a retour-ware.




With Mem at 600 and clock at 425, I get 170mh/s with an temperature of 83°C
What are your ambient temps like in hell! Get some water cooling! Cheesy
newbie
Activity: 44
Merit: 0
June 16, 2011, 09:34:55 PM
#17
This HDD can't be 108°C because it feels to cold.

But my GPA is hot in stand-by. 60°C and I can feel the heat on the card.


Yes it was used, but it was very clean. Didn't notice any dust  (didnt look that much, but you know..). May it be returned because it was too hot? I bought it as a retour-ware.




With Mem at 600 and clock at 425, I get 170mh/s with an temperature of 83°C
sr. member
Activity: 282
Merit: 250
June 16, 2011, 08:38:34 PM
#16
Buy fans. Get air moving THROUGH your case (in one end and OUT the other end).

You are very lucky your hard drive hasn't died - I hope you have good backups.

Keep your GPU under 85c and your cpu under 65c. If you don't you will shorten the life of both dramatically or just kill them flat out.
hero member
Activity: 896
Merit: 1000
Seal Cub Clubbing Club
June 16, 2011, 06:58:04 PM
#15
Was your 5870 used?  If so, make sure to clean out the fans and internal heat sink fins.  It'll make a world of difference if they're clogged with dust.
full member
Activity: 154
Merit: 100
June 16, 2011, 05:06:38 PM
#14
those are dreamvalues. Below 70°C at 60% fan! I get over 90° with 100% Fan. And two crashes (maybe from using Afterburner).

yeah just doublechecked to make sure I wasn't crazy.

940 core
300 mem

Fan 60%
Core temp 60C
stock voltage
412MH/s

Visiontek reference cards
Pages:
Jump to: