Pages:
Author

Topic: mining.BitcoinAffiliatenetwork.com-0% PPS + 1 Hour (or higher) Payout Interval - page 43. (Read 83345 times)

full member
Activity: 148
Merit: 100
SelfPay - ICO PRE SALE - huge Profit !
Quick question for people trying to maximize payouts.

Does anyone have suggestions on servers, or ways to maximize payouts for newer SHA-256 miners? I am noticing roughly 5% less PPS than other PPS sites. I am having hours where I go to like 1/2 of what I was paid, and the next hour doesn't increase the payout. So I am trying to figure out if my machines are really finicky, or if its just the pool undergoing changes in payout structure. Anyone else noticing big swings in payouts? With the bonus I seem to be doing a bit better than other pools. Without the bonus I'd be better off elsewhere.

Thoughts?


I got into mining scrypt earlier in the year, so these are my first SHA-256 rigs, thanks for the help for me and others!

Currently all my hash is pointed at first NY server. Should I move to the Virginia? What about the IX telehouse?

I have both my S3's pointed at east2 and I'm getting just about the expected hashing rate. Anyway, I'd like to know which PPS pools you've been using that pay roughly 5% more than BAN! I've used Discus Fish but have too high a ping to them from my location which results in too many rejected shares. I also used to mine at EclipseMC until I found out they were BFL though I must admit I didn't stick long enough to get some good PPS stats out of them. The only other PPS pool I've participated in was Deepbit but that was eons ago in Bitcoin years...

Anyway, I haven't been mining long enough at BAN with two Antminer S3's to do some good stats of actual payouts vs. expected payouts though but after getting that S3 from them the other day I feel quite motivated to mine here for the foreseeable future!  Grin
legendary
Activity: 1232
Merit: 1000
We need a Chicago 3333 and 3334 server for us in the Midwest
sr. member
Activity: 462
Merit: 250
i would say make 11 loose workers on lower dif port. higher dif spread over both machines as 1. so meaning if stratum give you 1200 difficulty then both jump to 1200 not that it spread or split that 1200
sr. member
Activity: 434
Merit: 250
freecrypto.top
i don't know what your miners are but i would point them to loose workers anyway and if they under 600 ghs each then use the lower dif stratum ports.

I am using s3. I got 11 right now running.

You think it would be beneficial to add 2 machines to 1 worker on the higher diff?

I am in NY, the only low diff server in USA is on other side of the country, so I prefer to stay on east coast server.
sr. member
Activity: 462
Merit: 250
i don't know what your miners are but i would point them to loose workers anyway and if they under 600 ghs each then use the lower dif stratum ports.
sr. member
Activity: 434
Merit: 250
freecrypto.top
Quick question for people trying to maximize payouts.

Does anyone have suggestions on servers, or ways to maximize payouts for newer SHA-256 miners? I am noticing roughly 5% less PPS than other PPS sites. I am having hours where I go to like 1/2 of what I was paid, and the next hour doesn't increase the payout. So I am trying to figure out if my machines are really finicky, or if its just the pool undergoing changes in payout structure. Anyone else noticing big swings in payouts? With the bonus I seem to be doing a bit better than other pools. Without the bonus I'd be better off elsewhere.

Thoughts?


I got into mining scrypt earlier in the year, so these are my first SHA-256 rigs, thanks for the help for me and others!

Currently all my hash is pointed at first NY server. Should I move to the Virginia? What about the IX telehouse?
legendary
Activity: 1232
Merit: 1000
All my miners are showing 3333/3334 west1 as dead and are on my backup pools.
The ones I had pointed that way went down also but the east1 was still running. I just redid all my miners to point them to west1 and use the east1 as the backup.
legendary
Activity: 1064
Merit: 1001
All my miners are showing 3333/3334 west1 as dead and are on my backup pools.
hero member
Activity: 616
Merit: 500
something something Bitcoin
dashboard down again.... 500 error. 

This appears to be resolved. Please let me know if there's still a problem.
sr. member
Activity: 316
Merit: 250
dashboard down again.... 500 error. 
legendary
Activity: 1232
Merit: 1000
if the price is right i might be interested in some S1's as well if you want to PM me details...
If the price is right I may be willing to sell some of my S1's I have all 9 of them undervolted to run at 140GHs at @ 170 watts. If wanted I can reset them back to factory settings of 180 GHs @ 365 watts. Also can set up with your pool/ miner information if needed. PM me if interested.


I had a hard time cleaning one that was pencil moded. I tried a couple different types of wipes, compressed air, erasers, etc. Finally got it but it was pita. Is there a trick to it?


when you first put the pencil on I just used my finger to remove if needed but once it gets baked on alcohol should clean it off. I redid one the other day to see if I could get better and when adding more pencil it seem to loosen the baked on stuff so that may work also.
newbie
Activity: 57
Merit: 0

Thanks for tip ThePhwner. Didn't know there was a 99% alcohol.
hero member
Activity: 616
Merit: 500
something something Bitcoin
if the price is right i might be interested in some S1's as well if you want to PM me details...
If the price is right I may be willing to sell some of my S1's I have all 9 of them undervolted to run at 140GHs at @ 170 watts. If wanted I can reset them back to factory settings of 180 GHs @ 365 watts. Also can set up with your pool/ miner information if needed. PM me if interested.


I had a hard time cleaning one that was pencil moded. I tried a couple different types of wipes, compressed air, erasers, etc. Finally got it but it was pita. Is there a trick to it?



For the really tough stuff, isopropyl alcohol, but not the kind you get at the pharmacy, the super-pure stuff sold for cleaning motherboards and what not. 99.99somethingsomethingsomething % so there's no water in it. I think 91% is the most you can get for medical use.

Something like this:

http://www.multitechproducts.com/isopropyl-alcohol-99-safe-surface-prep-ipa/
sr. member
Activity: 462
Merit: 250
use a eraser Wink hard version
newbie
Activity: 57
Merit: 0
if the price is right i might be interested in some S1's as well if you want to PM me details...
If the price is right I may be willing to sell some of my S1's I have all 9 of them undervolted to run at 140GHs at @ 170 watts. If wanted I can reset them back to factory settings of 180 GHs @ 365 watts. Also can set up with your pool/ miner information if needed. PM me if interested.


I had a hard time cleaning one that was pencil moded. I tried a couple different types of wipes, compressed air, erasers, etc. Finally got it but it was pita. Is there a trick to it?

legendary
Activity: 1232
Merit: 1000
any update on latest drawings?

I am curious too, as it has been over a week since the last winners were announced.

    Me too. I'd love to win some more!!!  Cheesy
O be quiet will you!!! Cheesy
sr. member
Activity: 462
Merit: 250
Hello all,


Keep a close watch on the forum. updated list will be posted fast. i mean really fast Smiley
member
Activity: 70
Merit: 10
any update on latest drawings?

I am curious too, as it has been over a week since the last winners were announced.

    Me too. I'd love to win some more!!!  Cheesy
newbie
Activity: 7
Merit: 0
any update on latest drawings?

I am curious too, as it has been over a week since the last winners were announced.
full member
Activity: 148
Merit: 100
SelfPay - ICO PRE SALE - huge Profit !
hey silverthornne where do you live?
xms

Yea, Netherlands is a long way from California, which was where it shipped from! I'm in Puerto Rico. I know, I'm the only crazy guy mining with such a high electricity cost but hey, I mine mostly for the fun tinkering around than purely the profit as my RSI makes it hard to enjoy my previous hobbies...
Pages:
Jump to: