Blowing up soon though, I'm sure...
Topic: MobileCash, First PoCh coin (Proof of Charity) - page 9. (Read 35169 times)
I think the news is MBL has done about $10 worth of volume in a week on C-Cex, and has a website that would be considered shitty in 1996.
Blowing up soon though, I'm sure...
Blowing up soon though, I'm sure...
So quiet! Any news, guys?
I think I finally figured it out. Somewhere I had read that some wallets do not support a wildcard in the rpcallowip function. (i.e. 192.168.1.*) will not work.
Earlier, I specified the IP addresses of both my mining rigs individually. It seems the Mobilecash wallet does not support this, but the wildcard does work for rpcallowip. I'm now getting messages in the console: "Got new merged mining work!"
Thanks guys.
Earlier, I specified the IP addresses of both my mining rigs individually. It seems the Mobilecash wallet does not support this, but the wildcard does work for rpcallowip. I'm now getting messages in the console: "Got new merged mining work!"
Thanks guys.
I am sure all command lines are correct. The problem just came from these software. Make sure you get all 32 bit versions. Last night, I got the similar error because I installed Twisted 64 bit. Now, just uninstall and re-install Twisted ( http://twistedmatrix.com/Releases/Twisted/15.4/Twisted-15.4.0.win32-py2.7.msi).
If that cannot fix the error, just uninstall all and start over.
I also upload all software in this guide on my dropbox.
https://www.dropbox.com/s/htzgl1e9viq0k84/p2pool_setup.rar?dl=0
Thank you!
I have uploaded it also here:
http://mbl.cash/download/p2pool_setup.rar
Damn. I may have spoken too soon. I have the VTC p2pool working on VTC but I'm getting errors when p2pool tries to credit me some MBL.
I am sure all command lines are correct. The problem just came from these software. Make sure you get all 32 bit versions. Last night, I got the similar error because I installed Twisted 64 bit. Now, just uninstall and re-install Twisted ( http://twistedmatrix.com/Releases/Twisted/15.4/Twisted-15.4.0.win32-py2.7.msi).
If that cannot fix the error, just uninstall all and start over.
I also upload all software in this guide on my dropbox.
https://www.dropbox.com/s/htzgl1e9viq0k84/p2pool_setup.rar?dl=0
I am not sure what to think on that error. Did you launch mbl wallet from the batch file? Maybe double check the moblecash.conf file too. If p2pool is working on vtc, then it must be something with a config somewhere.
Damn. I may have spoken too soon. I have the VTC p2pool working on VTC but I'm getting errors when p2pool tries to credit me some MBL.
I am glad you both got it to working.
VTC: VnuoQ5nLRLZkqug586vLSJsVMkLw5oThY9
VTC: VnuoQ5nLRLZkqug586vLSJsVMkLw5oThY9
great! it's finally working!
@nhutphan
@DragonSlayer
send me your VTC or MBL addresses and I'll credit you some coin.
@nhutphan
@DragonSlayer
send me your VTC or MBL addresses and I'll credit you some coin.
I just get the first MBL block 
Yes, just downgrade Python and it works right away. Solo mining Vertcoin seems just find. I got 3 blocks in 6 hours with about 70Mh/s. But nothing shows up on Mobilecash wallet. Maybe I have to give it more time.
You should have some MBL blocks already.
Try to check and compare your result on http://www.xpool.ca/blocks/MBL
That was the first time I use p2pool to merged mine. I set it up and ran to my bed at 6am. I thought it worked but it did not. Actually, my miner did not connect to p2pool because I used port 5888 in my miner. That why I did not get any Mobilecash. Now, I change to port 9171 which shows up in p2pool. And my miners connect to p2pool right away.
My miner's .bat file:
ccminer -a lyra2v2 -o http://YOUR_IP:9171 -u USER -p PASS
which port do we mine to enable merged mining to the machine that has both wallets? 5888 for VTC or 14414 for MBL?
Yes, just downgrade Python and it works right away. Solo mining Vertcoin seems just find. I got 3 blocks in 6 hours with about 70Mh/s. But nothing shows up on Mobilecash wallet. Maybe I have to give it more time.
You should have some MBL blocks already.
Try to check and compare your result on http://www.xpool.ca/blocks/MBL
@DragonSlayer,
I tried compiling the lyra2re-hash but got an error:
Also, does p2pool need to be compiled? the guide says to download the source, but then no other actions to it.
I tried compiling the lyra2re-hash but got an error:
Code:
c:\mingw\bin\gcc.exe -shared -s build\temp.win32-2.7\Release\lyra2remodule.o bui
ld\temp.win32-2.7\Release\lyra2re2module.o build\temp.win32-2.7\Release\lyra2re.
o build\temp.win32-2.7\Release\sponge.o build\temp.win32-2.7\Release\lyra2.o bui
ld\temp.win32-2.7\Release\sha3\blake.o build\temp.win32-2.7\Release\sha3\groestl
.o build\temp.win32-2.7\Release\sha3\keccak.o build\temp.win32-2.7\Release\sha3\
cubehash.o build\temp.win32-2.7\Release\sha3\bmw.o build\temp.win32-2.7\Release\
sha3\skein.o build\temp.win32-2.7\Release\lyra2re2_hash.def -LC:\Python27\libs -
LC:\Python27\PCbuild -lpython27 -lmsvcr90 -o build\lib.win32-2.7\lyra2re2_hash.p
yd
C:\Python27\libs/libpython27.a(dmmes00854.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00007.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00403.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00630.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00821.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00402.o):(.idata$7+0x0): more undefined refe
rences to `_head_C__build27_cpython_PCBuild_libpython27_a' follow
collect2: ld returned 1 exit status
error: command 'c:\\mingw\\bin\\gcc.exe' failed with exit status 1
Also, does p2pool need to be compiled? the guide says to download the source, but then no other actions to it.
I got the same error. I googled it and found out that the issue came from Python 2.7.10.
You have to roll back to Python 2.7.9 to get it work.
https://www.python.org/ftp/python/2.7.9/python-2.7.9.msi
Thanks for the find. I assume that you got it working once you downgraded Python?
Yes, just downgrade Python and it works right away. Solo mining Vertcoin seems just find. I got 3 blocks in 6 hours with about 70Mh/s. But nothing shows up on Mobilecash wallet. Maybe I have to give it more time.
@DragonSlayer,
I tried compiling the lyra2re-hash but got an error:
Also, does p2pool need to be compiled? the guide says to download the source, but then no other actions to it.
I tried compiling the lyra2re-hash but got an error:
Code:
c:\mingw\bin\gcc.exe -shared -s build\temp.win32-2.7\Release\lyra2remodule.o bui
ld\temp.win32-2.7\Release\lyra2re2module.o build\temp.win32-2.7\Release\lyra2re.
o build\temp.win32-2.7\Release\sponge.o build\temp.win32-2.7\Release\lyra2.o bui
ld\temp.win32-2.7\Release\sha3\blake.o build\temp.win32-2.7\Release\sha3\groestl
.o build\temp.win32-2.7\Release\sha3\keccak.o build\temp.win32-2.7\Release\sha3\
cubehash.o build\temp.win32-2.7\Release\sha3\bmw.o build\temp.win32-2.7\Release\
sha3\skein.o build\temp.win32-2.7\Release\lyra2re2_hash.def -LC:\Python27\libs -
LC:\Python27\PCbuild -lpython27 -lmsvcr90 -o build\lib.win32-2.7\lyra2re2_hash.p
yd
C:\Python27\libs/libpython27.a(dmmes00854.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00007.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00403.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00630.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00821.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00402.o):(.idata$7+0x0): more undefined refe
rences to `_head_C__build27_cpython_PCBuild_libpython27_a' follow
collect2: ld returned 1 exit status
error: command 'c:\\mingw\\bin\\gcc.exe' failed with exit status 1
Also, does p2pool need to be compiled? the guide says to download the source, but then no other actions to it.
I got the same error. I googled it and found out that the issue came from Python 2.7.10.
You have to roll back to Python 2.7.9 to get it work.
https://www.python.org/ftp/python/2.7.9/python-2.7.9.msi
Thanks for the find. I assume that you got it working once you downgraded Python?
xpool.ca merged mining is working well. it also seems to be triple-merge-mining MONA, which is a bonus.
Yes, seems all coins on Lyra2REv2 ports are doing very well. If you're mining on it, don't forget to set your MBL address if you want to keep your share of the MBL rewards. It's not on an exchange we support yet (Cryptsy/Bittrex/Poloniex) so it won't automatically get exchanged into your currency you're mining with. MONA and VTC will though.
Cheers!
How can the claim of triple merge mining MONA be true, when MONA itself is not a merge mineable coin. There is no "getauxblock" or any such facilities in the coin?
They're probably confused when they found a MONA and VTC block close together. But they are mined only one at a time and merged with MBL.
@DragonSlayer,
I tried compiling the lyra2re-hash but got an error:
Also, does p2pool need to be compiled? the guide says to download the source, but then no other actions to it.
I tried compiling the lyra2re-hash but got an error:
Code:
c:\mingw\bin\gcc.exe -shared -s build\temp.win32-2.7\Release\lyra2remodule.o bui
ld\temp.win32-2.7\Release\lyra2re2module.o build\temp.win32-2.7\Release\lyra2re.
o build\temp.win32-2.7\Release\sponge.o build\temp.win32-2.7\Release\lyra2.o bui
ld\temp.win32-2.7\Release\sha3\blake.o build\temp.win32-2.7\Release\sha3\groestl
.o build\temp.win32-2.7\Release\sha3\keccak.o build\temp.win32-2.7\Release\sha3\
cubehash.o build\temp.win32-2.7\Release\sha3\bmw.o build\temp.win32-2.7\Release\
sha3\skein.o build\temp.win32-2.7\Release\lyra2re2_hash.def -LC:\Python27\libs -
LC:\Python27\PCbuild -lpython27 -lmsvcr90 -o build\lib.win32-2.7\lyra2re2_hash.p
yd
C:\Python27\libs/libpython27.a(dmmes00854.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00007.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00403.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00630.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00821.o):(.idata$7+0x0): undefined reference
to `_head_C__build27_cpython_PCBuild_libpython27_a'
C:\Python27\libs/libpython27.a(dmmes00402.o):(.idata$7+0x0): more undefined refe
rences to `_head_C__build27_cpython_PCBuild_libpython27_a' follow
collect2: ld returned 1 exit status
error: command 'c:\\mingw\\bin\\gcc.exe' failed with exit status 1
Also, does p2pool need to be compiled? the guide says to download the source, but then no other actions to it.
I got the same error. I googled it and found out that the issue came from Python 2.7.10.
You have to roll back to Python 2.7.9 to get it work.
https://www.python.org/ftp/python/2.7.9/python-2.7.9.msi
xpool.ca merged mining is working well. it also seems to be triple-merge-mining MONA, which is a bonus.
Yes, seems all coins on Lyra2REv2 ports are doing very well. If you're mining on it, don't forget to set your MBL address if you want to keep your share of the MBL rewards. It's not on an exchange we support yet (Cryptsy/Bittrex/Poloniex) so it won't automatically get exchanged into your currency you're mining with. MONA and VTC will though.
Cheers!
How can the claim of triple merge mining MONA be true, when MONA itself is not a merge mineable coin. There is no "getauxblock" or any such facilities in the coin?
xpool.ca merged mining is working well. it also seems to be triple-merge-mining MONA, which is a bonus.
Yes, seems all coins on Lyra2REv2 ports are doing very well. If you're mining on it, don't forget to set your MBL address if you want to keep your share of the MBL rewards. It's not on an exchange we support yet (Cryptsy/Bittrex/Poloniex) so it won't automatically get exchanged into your currency you're mining with. MONA and VTC will though.
Cheers!
yea, but both have the same algo 
Jump to: