It really is very good news.
And most importantly, without delaying the timing)
Starting Masternods in fact nothing more than to never be opened by Dash?
Topic: [MOJO] MOJOv3 has been taken over by new devs - page 51. (Read 167315 times)
26/07/2016 - hard fork to MOJOcoin v.2.1 - update
As you are all probably aware we implemented a hard-fork this morning (GMT time) to MOJOcoin v.2.1.0.0 and by this time it seems to have been a success and the forked chain is processing along as expected. We get both PoW and PoS block created and the block time is getting more stable. I will update everyone with what we did and why and what we didn’t do and why not in this hard-fork and what to expect in the next few weeks from now.
What we did do:
1. Update the protocol version to 9000 and exclude any lower protocol versions from the network
2. Activate PoW blocks for X11 mining for around 6 months w/ a block reward of 20 MOJO
3. Keep PoW activated for around 2 years past the 6 months with a zero reward as a backup measure to ensure the chain doesn’t get stuck with low stake weight / MN issues.
4. Added permanent seed nodes to the code: mojonode01.mojocoin.org and 5 more. We will have at least 4 permanent seed nodes up at any given time.
5. Disabled Tor as the total Tor integration has not been completed and tested.
The reasons for doing the above has been explained before. We had a stuck chain and insufficient stake weight to drive it and we decide that this was the best option to progress this project.
Note on Tor: The Tor integration in the source code that we want has not been completed and tested. I know we had Tor running in version 1.0.1.0 but we have decided to deactivate this feature in this update. We need to do some more thinking and testing for how to integrate Tor. This is likely to happen in around 6 months time. So just to be clear, all the wallets are running on the clearnet and NOT on Tor so your IP may be discovered. The other security features should work. Some testing will be done and any feedback is welcome as long as it is as specific as possible about any bugs.
What we didn’t do (that you might have expected us to do…)
1. We did not reduce the min. stake age but this has been kept at 24 hours. The reason for this is that we could not be certain that a lowering of the min. stake age would not have security implications and also could not guarantee that it would not cause issues with the chain and block verifications.
2. We did not deactivate / change the fact that a MN has to be running for staking to take place. The MNs get their reward from other staking nodes. Again, this may change in a future upgrade but for now we kept the MN / PoS system as it was before the hard fork as we reviewed the code and it appears to working as it should. We now need to give it some time.
We are working on a method for setting up a MN that is as clear as it can be and I will put up a link to a ready built Linux daemon in the OP.
We will also set up at least 3 MNs in the coming days to make sure that staking is happening as it should.
Both exchanges and two block explorers have been upgraded to v.2.1 as well.
A Mac wallet will be out shortly. I am a Mac user myself so we are working on that.
Good luck to everyone…
As you are all probably aware we implemented a hard-fork this morning (GMT time) to MOJOcoin v.2.1.0.0 and by this time it seems to have been a success and the forked chain is processing along as expected. We get both PoW and PoS block created and the block time is getting more stable. I will update everyone with what we did and why and what we didn’t do and why not in this hard-fork and what to expect in the next few weeks from now.
What we did do:
1. Update the protocol version to 9000 and exclude any lower protocol versions from the network
2. Activate PoW blocks for X11 mining for around 6 months w/ a block reward of 20 MOJO
3. Keep PoW activated for around 2 years past the 6 months with a zero reward as a backup measure to ensure the chain doesn’t get stuck with low stake weight / MN issues.
4. Added permanent seed nodes to the code: mojonode01.mojocoin.org and 5 more. We will have at least 4 permanent seed nodes up at any given time.
5. Disabled Tor as the total Tor integration has not been completed and tested.
The reasons for doing the above has been explained before. We had a stuck chain and insufficient stake weight to drive it and we decide that this was the best option to progress this project.
Note on Tor: The Tor integration in the source code that we want has not been completed and tested. I know we had Tor running in version 1.0.1.0 but we have decided to deactivate this feature in this update. We need to do some more thinking and testing for how to integrate Tor. This is likely to happen in around 6 months time. So just to be clear, all the wallets are running on the clearnet and NOT on Tor so your IP may be discovered. The other security features should work. Some testing will be done and any feedback is welcome as long as it is as specific as possible about any bugs.
What we didn’t do (that you might have expected us to do…)
1. We did not reduce the min. stake age but this has been kept at 24 hours. The reason for this is that we could not be certain that a lowering of the min. stake age would not have security implications and also could not guarantee that it would not cause issues with the chain and block verifications.
2. We did not deactivate / change the fact that a MN has to be running for staking to take place. The MNs get their reward from other staking nodes. Again, this may change in a future upgrade but for now we kept the MN / PoS system as it was before the hard fork as we reviewed the code and it appears to working as it should. We now need to give it some time.
We are working on a method for setting up a MN that is as clear as it can be and I will put up a link to a ready built Linux daemon in the OP.
We will also set up at least 3 MNs in the coming days to make sure that staking is happening as it should.
Both exchanges and two block explorers have been upgraded to v.2.1 as well.
A Mac wallet will be out shortly. I am a Mac user myself so we are working on that.
Good luck to everyone…
Both Livecoin and Coinexchange.io have updated to v.2.1 so you should be able to use both
Updated Wallet - Now 1 Connect 5 node the POS started. Now you can pick up a coin from the stock exchange?
EBK1000 The way forward to address their coins: MAkfB7cXgTqxDtUG41Mdwob2JDKVw6saEB
EBK1000 The way forward to address their coins: MAkfB7cXgTqxDtUG41Mdwob2JDKVw6saEB
I will work on a fix for the "missing addresses" / payouts to masternodes display in a few days, and a masternode info page.. My explorer was not build with masternode core's in mind.. hehe..
I assume the addresses are also public in the chain right?
I assume the addresses are also public in the chain right?
Should be, just the public ones
I will work on a fix for the "missing addresses" / payouts to masternodes display in a few days, and a masternode info page.. My explorer was not build with masternode core's in mind.. hehe..
I assume the addresses are also public in the chain right?
I assume the addresses are also public in the chain right?
Updated my explorer.. Thanks for the notice through PM!
Thank you, we got 14 connections and get both PoS and PoW blocks now so that is promising. Let it run for a few hours let's see the block times etc.
Are you MN operators now getting your half of the PoS blocks?
Updated my explorer.. Thanks for the notice through PM!
Mined 2 blocks but block reward 0.00 mojo.
the rewards start at 28900, what blocks did you get?
All ok now, block reward 20.
Sorry the coin is not compatible with my pool. I can't provide a fast sollution foir that.
cookie
cookie
Mined 2 blocks but block reward 0.00 mojo.
the rewards start at 28900, what blocks did you get?
Mined 2 blocks but block reward 0.00 mojo.
when you get the chance please update the source link on mojocoin.org
Done, sorry, oversight, the correct link is on the website now
when you get the chance please update the source link on mojocoin.org
source @ https://github.com/bryceweiner/mojocoin ?
Windows-qt 2.1
MANDATORY UPDATE PLS DOWNLOAD AND UPGRADE TO VERSION 2.1 ASAP
MANDATORY UPDATE PLS DOWNLOAD AND UPGRADE TO VERSION 2.1 ASAP
A hard-fork is being implemented in the next few minutes. It would help if you shut down your wallet and wait for a link to v.2.1 and upgrade. This will make it easier for you to upgrade and less likely to cause any issues, so please close your wallets now and wait a few minuted for a new link to v.2.1 - THIS IS HARD-FORK MANDATORY UPGRADE.
Standing by
A hard-fork is being implemented in the next few minutes. It would help if you shut down your wallet and wait for a link to v.2.1 and upgrade. This will make it easier for you to upgrade and less likely to cause any issues, so please close your wallets now and wait a few minuted for a new link to v.2.1 - THIS IS HARD-FORK MANDATORY UPGRADE.
Jump to: