These builds are out of date.
The new version uses cmake, and is in super-heavy active development.
https://github.com/Open-Transactions/opentxs
My old windows build system dosent work with it.
Topic: Moneychanger (Windows Builds) - Out of Date! (Read 59434 times)
sorry guys, I have been traveling. I will try and make a new build sometime soonish. 
The error that Moneychagner cannot start is because of not packaging a QT dependency.
There has been a huge amount of work on Open Transactions since the last build. There may be quite abit of work to create another build.
Cam.
The error that Moneychagner cannot start is because of not packaging a QT dependency.
There has been a huge amount of work on Open Transactions since the last build. There may be quite abit of work to create another build.
Cam.
THX. Looking forward to it...
sorry guys, I have been traveling. I will try and make a new build sometime soonish.
The error that Moneychagner cannot start is because of not packaging a QT dependency.
There has been a huge amount of work on Open Transactions since the last build. There may be quite abit of work to create another build.
Cam.
The error that Moneychagner cannot start is because of not packaging a QT dependency.
There has been a huge amount of work on Open Transactions since the last build. There may be quite abit of work to create another build.
Cam.
OP has not replied here in weeks. Will write him a PM as the activity log shows that he was active today!
0.91.b: Closes immediately on strartup
0.92.c: "icuin52.dll missing" error on startup
0.89.q x-64: found this on my hdd and installed. Seems to work so far. I think it's just OT however, without Moneychanger GUI. comes up with the usual no server contract message and stuff.
Win7 Ultimate SP1 x64. Have installed a lot of SW listed here:
https://github.com/Open-Transactions/Open-Transactions/blob/master/docs/INSTALL-Windows.txt
Edit: Have not found a log folder. Can provide logs if you can point me there. Seriously I have never compiled anything in my life and it is quite confusing and right now I don't even know if I have to build anything, have some of the installed programs open or just use your installer and ist's supposed to be all included. I have gone through the whole thread and done a lot of reading on OT and in the Installation docs on GitHub. It's late, need to go to bed. any help appreciated. Is this still the actual prerequisites?
https://bitcointalksearch.org/topic/m.861959
0.92.c: "icuin52.dll missing" error on startup
0.89.q x-64: found this on my hdd and installed. Seems to work so far. I think it's just OT however, without Moneychanger GUI. comes up with the usual no server contract message and stuff.
Win7 Ultimate SP1 x64. Have installed a lot of SW listed here:
https://github.com/Open-Transactions/Open-Transactions/blob/master/docs/INSTALL-Windows.txt
Edit: Have not found a log folder. Can provide logs if you can point me there. Seriously I have never compiled anything in my life and it is quite confusing and right now I don't even know if I have to build anything, have some of the installed programs open or just use your installer and ist's supposed to be all included. I have gone through the whole thread and done a lot of reading on OT and in the Installation docs on GitHub. It's late, need to go to bed. any help appreciated. Is this still the actual prerequisites?
https://bitcointalksearch.org/topic/m.861959
Same here. OP, please include all necessary libraries in your installer before releasing this or tell us what prerequisites are required.
0.91.b: Closes immediately on strartup
0.92.c: "icuin52.dll missing" error on startup
0.89.q x-64: found this on my hdd and installed. Seems to work so far. I think it's just OT however, without Moneychanger GUI. comes up with the usual no server contract message and stuff.
Win7 Ultimate SP1 x64. Have installed a lot of SW listed here:
https://github.com/Open-Transactions/Open-Transactions/blob/master/docs/INSTALL-Windows.txt
Edit: Have not found a log folder. Can provide logs if you can point me there. Seriously I have never compiled anything in my life and it is quite confusing and right now I don't even know if I have to build anything, have some of the installed programs open or just use your installer and ist's supposed to be all included. I have gone through the whole thread and done a lot of reading on OT and in the Installation docs on GitHub. It's late, need to go to bed. any help appreciated. Is this still the actual prerequisites?
https://bitcointalksearch.org/topic/m.861959
0.92.c: "icuin52.dll missing" error on startup
0.89.q x-64: found this on my hdd and installed. Seems to work so far. I think it's just OT however, without Moneychanger GUI. comes up with the usual no server contract message and stuff.
Win7 Ultimate SP1 x64. Have installed a lot of SW listed here:
https://github.com/Open-Transactions/Open-Transactions/blob/master/docs/INSTALL-Windows.txt
Edit: Have not found a log folder. Can provide logs if you can point me there. Seriously I have never compiled anything in my life and it is quite confusing and right now I don't even know if I have to build anything, have some of the installed programs open or just use your installer and ist's supposed to be all included. I have gone through the whole thread and done a lot of reading on OT and in the Installation docs on GitHub. It's late, need to go to bed. any help appreciated. Is this still the actual prerequisites?
https://bitcointalksearch.org/topic/m.861959
Ok I feel a little bit embarrassed to post these noob questions here but will do so anyway as I really want to learn something and @ da2ce7 you seem to be a nice guy.
1.) What are the prerequisites for installing this installer? Libraryies, OS … What about the things mentioned in the link below? Are they included in your installer? https://github.com/Open-Transactions/Open-Transactions/blob/master/docs/INSTALL-Windows.txt
2.) Once installed, how do I setup OT so it will connect to the test server?
3.) Now I would like to e.g. issue my currency onto the test server and start moving it between two nyms. Is there a dummies guide for doing that?
4.) What do I have to do to be able to work with the utility script: smartcontract.ot as stated here: https://github.com/Open-Transactions/Open-Transactions/tree/master/scripts/smartcontracts
5.) Any other good guides you can point me to? Best way to get started as a Windows user.
Disclaimer: I do have some experiences with scrip languages such as R, VBA or LaTeX but I am definitely not a programmer. Long term Windows user.
1.) What are the prerequisites for installing this installer? Libraryies, OS … What about the things mentioned in the link below? Are they included in your installer? https://github.com/Open-Transactions/Open-Transactions/blob/master/docs/INSTALL-Windows.txt
2.) Once installed, how do I setup OT so it will connect to the test server?
3.) Now I would like to e.g. issue my currency onto the test server and start moving it between two nyms. Is there a dummies guide for doing that?
4.) What do I have to do to be able to work with the utility script: smartcontract.ot as stated here: https://github.com/Open-Transactions/Open-Transactions/tree/master/scripts/smartcontracts
5.) Any other good guides you can point me to? Best way to get started as a Windows user.
Disclaimer: I do have some experiences with scrip languages such as R, VBA or LaTeX but I am definitely not a programmer. Long term Windows user.
New Version. 0.92.c
New Build.
NICE JOB!
OT 0.91.a for Windows (inc Moneychanger released!).
Freaking awesome!
You Rock man! I'm planning all sorts of Havok with this program.
OT 0.91.a for Windows (inc Moneychanger released!).
We have completed quite a few changes under the hood. Shall soon have a new release.
Add my Bitcoin-OTC link to the first-page.
New Release, including C++ QT Moneychanger!
Woho! Checkout the OP!
Nice job done.Woho! Checkout the OP!
Quote
Windows:
Code:
SHA256(Open-Transactions-0.90.c-Win32-setup.zip)= b2a74a88283c86bfdeda3de94ed9850758e5d6b8ecf3c6274d4e078d8d666264
Code:
SHA256(Open-Transactions-0.90.c-Win32-setup.zip)= b2a74a88283c86bfdeda3de94ed9850758e5d6b8ecf3c6274d4e078d8d666264
What checksum utility do you use to verify a SHA256 hash on Windows?
Try 'Hash Slash': http://www.softpedia.com/get/System/File-Management/HashSlash.shtml
If I click "Attempt Load",
Moneychanger disappears and nothing happens.
Moneychanger disappears and nothing happens.
Ok... lets try version 3... (just uploaded).
You may need to remove you pid file.
Load up Moneychanger in the console it will give you a better output.
And a stupid stupid error makes me release v4.
Should work now! If I click "Attempt Load",
Moneychanger disappears and nothing happens.
Moneychanger disappears and nothing happens.
Ok... lets try version 3... (just uploaded).
You may need to remove you pid file.
Load up Moneychanger in the console it will give you a better output.
If I click "Attempt Load",
Moneychanger disappears and nothing happens.
Moneychanger disappears and nothing happens.
I installed it on Windows 7 but I had to manually find the following dll files and place them in the Open-Transactions folder:
qt5widgets.dll
qt5gui.dll
qt5core.dll
libglesv2.dll
icuin51.dll
icuuc51.dll
icudt51.dll
But now I'm getting the following error when I try to run moneychanger-qt.exe:
"The procedure entry point ?viewportSizeHint@QTableView@@MBE?AVQSize@@XZ could not be located in the dynamic link library Qt5Widgets.dll."
I'm guessing I must have the wrong version of qt5widgets.dll or something?
qt5widgets.dll
qt5gui.dll
qt5core.dll
libglesv2.dll
icuin51.dll
icuuc51.dll
icudt51.dll
But now I'm getting the following error when I try to run moneychanger-qt.exe:
"The procedure entry point ?viewportSizeHint@QTableView@@MBE?AVQSize@@XZ could not be located in the dynamic link library Qt5Widgets.dll."
I'm guessing I must have the wrong version of qt5widgets.dll or something?
Updated it... Hope it will work now
Jump to: