Topic: "MP TEST FIRMWARE!" on S17 / T17 series control board? (Read 529 times)
Yes it's a demo firmware not used for mining. Flash to Asic.to firmware after you are on it to control stuff
This firmware are not interest ? just i test it on my T17, and ... just i past litle line by kernel log :
So , is allowed to take ALL CONTROL ! freq + voltage + fan !!!
SO ... litle problem lol , not allow for change "test" pool ... is antpool "antminer_1" , if you change it, not hashing ...
Code:
2020-01-29 21:28:10 driver-btm-soc.c:3313:init_freq_mode: This is fix-freq version
2020-01-29 21:28:10 driver-btm-soc.c:4218:bitmain_soc_init: opt_multi_version=1
2020-01-29 21:28:10 driver-btm-soc.c:4219:bitmain_soc_init: opt_bitmain_ab=1
2020-01-29 21:28:10 driver-btm-soc.c:4220:bitmain_soc_init: opt_bitmain_work_mode=2
2020-01-29 21:28:10 driver-btm-soc.c:3414:init_dev_frequency: fixd frequency is 875
2020-01-29 21:48:51 power.c:267:set_working_voltage: working_voltage = 18.200000
2020-01-29 21:48:51 driver-btm-soc.c:3652:init_working_voltage: set fixed voltage to 18.200000
2020-01-29 21:48:19 power.c:177:power_check_protocol_type: power type APW9 3600W
2020-01-29 21:59:30 driver-btm-soc.c:2183:check_system_work: ideal hash is 52000
So , is allowed to take ALL CONTROL ! freq + voltage + fan !!!
SO ... litle problem lol , not allow for change "test" pool ... is antpool "antminer_1" , if you change it, not hashing ...
Here is the link to the page taserz was referring to, if anyone missed it: https://asic.to/ssh-unlock/
I actually updated the download link on that page. So you can flash right to MP TEST FIRMWARE. So if you are on the latest firmware you can flash to thatn then flash to my firmware or stock as it does not check signatures.
Video guide: https://www.youtube.com/watch?v=q9i_5KYl4Xw
Here is the link to the page taserz was referring to, if anyone missed it: https://asic.to/ssh-unlock/
I have this firmware, it’s convenient to remove SSH "cannot find signature" protection with it, download in the description under the video.
https://youtu.be/_epKPjo_LZk
https://youtu.be/_epKPjo_LZk
I wouldn't advise anyone to download this firmware until more information are available, this goes to every other firmware that does not come directly come from the manufacturer itself.
The most important question as far as many people are concern is the hidden fees, i am 100% sure this firmware has some sort of % that goes to the dev's pool which varies from 2% to 10% or even 20% in some cases depending on the developer.
Therefore, as a firmware dev, you need to prove that your firmware has no fees or/and if it does have any fees you need to state it right here, and you need to prove that all fees are transparent, you need to also prove this is not just Bitmain's firmware with ssh unlocked, if you fail to do so, you are simply just another scammer as far as I am concern.
I have this firmware, it’s convenient to remove SSH "cannot find signature" protection with it, download in the description under the video.
https://youtu.be/_epKPjo_LZk
https://youtu.be/_epKPjo_LZk
Thanks for this detail, all is clear for me 
This version is compatible with S17 only ? or with S17 and T17 ?
This version is compatible with S17 only ? or with S17 and T17 ?
They are all fixed freq. In that all hashboards are the same frequency on that firmware.
Asian to lazy to code in the date.
JK
Nah that is the date epoch date. Google Epoch Date
JK
Nah that is the date epoch date. Google Epoch Date
Of corse :p but i tell you :
So ... ok ...
But in kernel log show this : "1970-01-01 00:00:44 driver-btm-soc.c:3178:init_freq_mode: This is fix-freq version" !!!
what explication ?
But in kernel log show this : "1970-01-01 00:00:44 driver-btm-soc.c:3178:init_freq_mode: This is fix-freq version" !!!
what explication ?
Asian to lazy to code in the date.
JK
Nah that is the date epoch date. Google Epoch Date
@taserz ya, laugh all you want boi 
honestly I laughed at myself too, for a moment i felt like i was a stupid newbie who had no clue, this is only because I had no time to play with these new gears, if it was anything S9 related I would have known slightly better 
.
But hey, you could have pretended that you had no clue, you would have gotten yourself a free control board
Thanks tim for bringing this topic up, thanks to tim-bc and of course taserz for solving the puzzle.
honestly I laughed at myself too, for a moment i felt like i was a stupid newbie who had no clue, this is only because I had no time to play with these new gears, if it was anything S9 related I would have known slightly better .But hey, you could have pretended that you had no clue, you would have gotten yourself a free control board
Thanks tim for bringing this topic up, thanks to tim-bc and of course taserz for solving the puzzle.
I want a E or + control board.... I want to break into one.
@taserz ya, laugh all you want boi honestly I laughed at myself too, for a moment i felt like i was a stupid newbie who had no clue, this is only because I had no time to play with these new gears, if it was anything S9 related I would have known slightly better .
But hey, you could have pretended that you had no clue, you would have gotten yourself a free control board
Thanks tim for bringing this topic up, thanks to tim-bc and of course taserz for solving the puzzle.
honestly I laughed at myself too, for a moment i felt like i was a stupid newbie who had no clue, this is only because I had no time to play with these new gears, if it was anything S9 related I would have known slightly better .But hey, you could have pretended that you had no clue, you would have gotten yourself a free control board
Thanks tim for bringing this topic up, thanks to tim-bc and of course taserz for solving the puzzle.
So ... ok ...
But in kernel log show this : "1970-01-01 00:00:44 driver-btm-soc.c:3178:init_freq_mode: This is fix-freq version" !!!
what explication ?
But in kernel log show this : "1970-01-01 00:00:44 driver-btm-soc.c:3178:init_freq_mode: This is fix-freq version" !!!
what explication ?
It's not a test firmware or anything guys lmao. You all getting all willy nilly thinking you can reverse it. It's the same copy of cgminer that is on the official firmware too...
You are on their beta firmware. It's pretty much the same as the May firmware for S17... It's nothing special. If you want I can give you the SD card image of that firmware from bitmain factory to SD card flash to that.
I am more concerned about why they sent you that firmware. You sure it wasn't a used or repaired unit or control board. That is odd. I have never seen one shipped with that as all production models come with finished firmware not the test firmware.
edit: Pretty sure you got a refurb control board as they flash to that firmware then current to wipe it's memory if it has issues. But yeah that firmware can be downloaded from my website on asic.to the exact one you have loaded. Under SSH Unlock tool. We use it to downgrade latest firmware miners so we can unlock them and load our firmware on them
You are on their beta firmware. It's pretty much the same as the May firmware for S17... It's nothing special. If you want I can give you the SD card image of that firmware from bitmain factory to SD card flash to that.
I am more concerned about why they sent you that firmware. You sure it wasn't a used or repaired unit or control board. That is odd. I have never seen one shipped with that as all production models come with finished firmware not the test firmware.
edit: Pretty sure you got a refurb control board as they flash to that firmware then current to wipe it's memory if it has issues. But yeah that firmware can be downloaded from my website on asic.to the exact one you have loaded. Under SSH Unlock tool. We use it to downgrade latest firmware miners so we can unlock them and load our firmware on them
I have test on my S9K ... is not true test but make idea
Were you able to make a flashable firmware version out of the files that tim shared??
I have asked taserz to check this thread as well, if taserz or thierry4wd were able to make a flasheble version from the files you shared then there is no need for me to buy the control board as i mentioned early I have no actual use for it, if thierry4wd or taserz need that control board to extract a " flashable firmware version that doesn't shit the bed" I will buy one for one of them,or whoever is willing to do that anyway.
again I am doing this for the community in the first place, so i hope that one of the fine gentlemen here is willing to spend some time to do this for free for the community as well.
That is great news, half the problem is already solved. 
did you manage to back up the whole firmware in a flush-able format where others can flash it on their T17/S17 boards to test it? if not then could you please seek some help from thierry4wd , taserz or any other firmware savvy?
did you manage to back up the whole firmware in a flush-able format where others can flash it on their T17/S17 boards to test it? if not then could you please seek some help from thierry4wd , taserz or any other firmware savvy?
Compiling bmminer is not the hard part making a flashable firmware version that doesn't shit the bed is more a bitch than anything else.
I have done compiling custom bmminer binary, that's about it. So if anyone wants to give me tips on making a flashable version of firmware that would be great. But I don't see how it would help if all stock S17/T17 miners only accept signed firmware files anyway.
if you are not willing to do that, I might just buy the control board from you and have it sent to however is willing to extract and test the firmware.
I already am selling the control boards on ebay (factory new condition) and pre-flashing the firmware for my buyers, if you're serious about buying one, it would be no extra cost and I'll just leave the MP test firmware on there.
I have test on my S9K ... is not true test but make idea
And i confirm, on boot (bitmainer_setup.sh) SSH IS ACTIVED !
And i confirm, on boot (bitmainer_setup.sh) SSH IS ACTIVED !
Code:
###########################
# dropbear
NO_START=0
if [ ! -f /config/dropbear ] ; then
echo NO_START=0 > /config/dropbear
fi
cp /config/dropbear /etc/default/dropbear
###########################
That is great news, half the problem is already solved.
did you manage to back up the whole firmware in a flush-able format where others can flash it on their T17/S17 boards to test it? if not then could you please seek some help from thierry4wd , taserz or any other firmware savvy?
if you are not willing to do that, I might just buy the control board from you and have it sent to however is willing to extract and test the firmware.
If SSH is actived... is error from bitmain !
Thanks for yours files !!! good job, i d'ont have S17/T17 for test
Thanks for yours files !!! good job, i d'ont have S17/T17 for test
Hey guys, I appreciate your interest. I should have mentioned that I ordered several with the same "MP test" firmware so that shouldn't be an issue, it's not like I only had one which is now gone. It was just when I was pre-flashing T17 firmware for a customer that I noticed and made the post.
So with the above in mind, all is not lost, I don't actually have any S17 / T17 hashboards physically with me so I can't test that, but I can do some tests on it or sell one to you guys if you really want.
But also, SSH is enabled on it, I downloaded most of the filesystem if you guys want to take a look: https://gofile.io/?c=owO8lA
Also here is the HTML source of quality.html : https://pastebin.com/b7FVuHqx and here is cgi-bin/miner_stats.cgi : https://pastebin.com/gJrxVEMF
With that being said, let us try to find that firmware, i will try to order a control board ( the same one tim bought) and see if we get lucky, will also try to contact my chinese suppliers to see if anyone has a clue.
So with the above in mind, all is not lost, I don't actually have any S17 / T17 hashboards physically with me so I can't test that, but I can do some tests on it or sell one to you guys if you really want.
But also, SSH is enabled on it, I downloaded most of the filesystem if you guys want to take a look: https://gofile.io/?c=owO8lA
Also here is the HTML source of quality.html : https://pastebin.com/b7FVuHqx and here is cgi-bin/miner_stats.cgi : https://pastebin.com/gJrxVEMF
Agreed, i might have underestimated what the test firmware might have and can do, i think i said what i said mostly to make tim feel a little less bad since Artemis3's post was a bit too harsh IMO.
With that being said, let us try to find that firmware, i will try to order a control board ( the same one tim bought) and see if we get lucky, will also try to contact my chinese suppliers to see if anyone has a clue.
Jump to: