M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner - page 35.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: PatMan on August 24, 2014, 06:28:47 AM

That fixed it mdude - well done!

Regarding your Bestshare issue - I use it on p2pool and don't have that problem - everything shows up as it should.......

That's just bizarre then. I'm using p2pool from git as of 8/19, I'm not using the standard payout address as the username (since it's a private node, it'll default to the right one) so I can track my miners, and I'm using fixed share size as an experiment to try to keep my DOA rate low (it's not working for my S1 or S2 ~5% avg atm). Also, I'm using a URL of stratum+tcp://address:port.

ie,
stratum+tcp://192.168.0.194:9332
S2+512
abc

What are you doing?

Quote

A small donation will be heading your way shortly my man

Thanks! Will go to paying off my loan.

I'm hurting on BTC because of the JamesC hosting failure. Sad

M

PatMan

hero member

Activity: 924

Merit: 1000

Watch out for the "Neg-Rep-Dogie-Police".....

That fixed it mdude - well done!

Regarding your Bestshare issue - I use it on p2pool and don't have that problem - everything shows up as it should.......

A small donation will be heading your way shortly my man

heslo

legendary

Activity: 1202

Merit: 1181

Legend! Many thanks!

mdude77

legendary

Activity: 1540

Merit: 1001

Thanks. I apparently missed testing that line.

Here's the fix. The app should say v2.91:

Download link: MAntMonitor291.zip

M

EDIT: Also, I looked to see why the BestShare value comes up as 0 for me on p2pool for my S2 and S3. Every result from the API that I've seen shows 0, so I don't think this is fixable on my side.

heslo

legendary

Activity: 1202

Merit: 1181

Quote from: PatMan on August 24, 2014, 05:56:49 AM

Hi mdude,

Nice job my man - got a little problem though, I'm unable to delete any of the ants - either the old ones (S3's reg'd as S1's) or the newer, correct ones. I keep getting this:

Tried restarting the ants & the program.......

Edit: I see someone beat me to it......... Wink

lol yep! Same problem as me!

PatMan

hero member

Activity: 924

Merit: 1000

Watch out for the "Neg-Rep-Dogie-Police".....

Hi mdude,

Nice job my man - got a little problem though, I'm unable to delete any of the ants - either the old ones (S3's reg'd as S1's) or the newer, correct ones. I keep getting this:

Tried restarting the ants & the program.......

Edit: I see someone beat me to it......... Wink

heslo

legendary

Activity: 1202

Merit: 1181

Working good here, but a whole bunch of deleted Ants keep showing up and when I go to delete them it keeps saying

"Can not delete subtree key because the subtree does not exist"

Any ideas?

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

Quote from: mdude77 on August 23, 2014, 08:38:41 PM

Quote from: MoreBloodWine on August 23, 2014, 08:35:49 PM

So does this mean you got your S3 then for testing ?

Also hope to see S3 web scraping soon so I an use this app with my out of home hosted machines with unique ports.

Yes, it arrived yesterday, with one fan a little mangled complements of UPS, but otherwise fully functional.

I intend to add web scraping soon. Most people use the API, and I only had so much time to code tonite, so API came first.

M

Sounds good, so there is hope for me then heh.

Using the API would be nice bu when previously discussed it sounded all too difficult with externally hosted machines.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: MoreBloodWine on August 23, 2014, 08:35:49 PM

So does this mean you got your S3 then for testing ?

Also hope to see S3 web scraping soon so I an use this app with my out of home hosted machines with unique ports.

Yes, it arrived yesterday, with one fan a little mangled complements of UPS, but otherwise fully functional.

I intend to add web scraping soon. Most people use the API, and I only had so much time to code tonite, so API came first.

M

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

So does this mean you got your S3 then for testing ?

Also hope to see S3 web scraping soon so I an use this app with my out of home hosted machines with unique ports.

mdude77

legendary

Activity: 1540

Merit: 1001

Here's v2.9:

- Fixed a few instances where .net errors could be thrown if an Ant didn't respond for whatever reason.
- Fixed the problem with deleted Ants coming back on their own accord.
- Fixed a problem that would cause Ants to not show up on the grid when they should.
- Added API support for S3s.

Download link: MAntMonitor291.zip

Notes:

- Web scraping support for S3s isn't here yet. I intend to add that soon.
- The person who had the problem with the xth and greater Ant showing up, please try this version, I suspect it'll fix it.
- If you are using S1s as S3s, I think you'll need to remove them and readd them as S3s, otherwise you'll probably end up with them there twice, once as S1, once as S3.

Other things of interest:

- S3s are, for the most part, just like S1s. That means the "update pool" logic doesn't work, just like it doesn't for S1s, unless you enable API access.
- S3 support broke with the latest firmware because Bitmain is presenting malformed JSON with one of the APIs.

Feedback is most welcome. Adding support for S3s was pretty straightforward, once I figured out why it was choking on the JSON output from the API. However I may have overlooked something.

M

montyfd

member

Activity: 60

Merit: 10

Just found that Ant Monitor V 1.9 still works with the latest S3 firmware.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: Thilonys on August 20, 2014, 06:51:52 PM

only one of my miners show up the others just error out and then i get .net errors any clue?

there all s1's

I believe others have stated if you aren't using the latest firmware the S1s don't behave.

M

Thilonys

newbie

Activity: 4

Merit: 0

only one of my miners show up the others just error out and then i get .net errors any clue?

there all s1's

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: wlz2011 on August 20, 2014, 04:24:37 AM

Hi

Mr. M Hello, great software, it is tough!

The firmware does not support S3

antMiner_S320140811.bin

Firmware Download:

www.bitmaintech.com/support.htm?pid=007201407180243004432lBQW28O0633

I hope this version will support S3 Wink

Thanks, I'm aware it doesn't work with the latest firmware. I'm working on obtaining an S3 to add support for it to my app.

M

wlz2011

member

Activity: 71

Merit: 10

Hi

Mr. M Hello, great software, it is tough!

The firmware does not support S3

antMiner_S320140811.bin

Firmware Download:

www.bitmaintech.com/support.htm?pid=007201407180243004432lBQW28O0633

I hope this version will support S3 Wink

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: MoreBloodWine on August 19, 2014, 07:17:54 PM

If all you need is underlying HTML, I can get you the source if that's what you mean / need to get stared.

Just not sure how to really do it from chrome, I know with IE you just "view source".

As for finding and S3, I an only think of eBay or Escrow with someone here.

I need one on hand. I have a lead on one outside of eBay.

Thanks.

M

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

Quote from: mdude77 on August 19, 2014, 07:14:07 PM

Quote from: MoreBloodWine on August 19, 2014, 07:06:48 PM

Quote from: mdude77 on August 19, 2014, 07:04:16 PM

Quote from: MoreBloodWine on August 19, 2014, 07:03:04 PM

Hey M, I've been thinking about this.

Even with me using the latest FW, I should still be able to web scrape right ? I mean, AFAIK it's just the SSH API the new FW messes up. That said, just how do I enter my IP ? I saw presets like 1.2.3.4:5678 & 1.2.3.4:5678:80, hell, even 1.2.3.4:5678:80:80

I tried both 1.2.3.4:5678 & 1.2.3.4:5678:80 and don't seem to be getting any info with S1 or S2.

All my IP's are like this as I previously stated.

1.2.3.4:2013
1.2.3.4:2014
1.2.3.4:2015
1.2.3.4:2016

Screenscrapes won't work if the screen isn't like an S1 or S2. And I don't think it is.

Sad

M

So even if I had the old FW still, I'd be SOL anyway. lol, nice.

FWIW, you ever t that loan from the guy here in the thread that offered so you can get an S3 ?

Edit: If you check the S3 thread you should find a screen image from someone.

It's more than just a screen image. I need the underlying HTML. I really can't do it w/o an S3 on hand.

I got the loan ... working on getting an S3. Bitmain has done a good job making their Ants scarce. Reminds me of the diamond industry. Keep the supply limited.

M

If all you need is underlying HTML, I can get you the source if that's what you mean / need to get stared.

Just not sure how to really do it from chrome, I know with IE you just "view source".

As for finding and S3, I an only think of eBay or Escrow with someone here.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: MoreBloodWine on August 19, 2014, 07:06:48 PM

Quote from: mdude77 on August 19, 2014, 07:04:16 PM

Quote from: MoreBloodWine on August 19, 2014, 07:03:04 PM

Hey M, I've been thinking about this.

Even with me using the latest FW, I should still be able to web scrape right ? I mean, AFAIK it's just the SSH API the new FW messes up. That said, just how do I enter my IP ? I saw presets like 1.2.3.4:5678 & 1.2.3.4:5678:80, hell, even 1.2.3.4:5678:80:80

I tried both 1.2.3.4:5678 & 1.2.3.4:5678:80 and don't seem to be getting any info with S1 or S2.

All my IP's are like this as I previously stated.

1.2.3.4:2013
1.2.3.4:2014
1.2.3.4:2015
1.2.3.4:2016

Screenscrapes won't work if the screen isn't like an S1 or S2. And I don't think it is.

Sad

M

So even if I had the old FW still, I'd be SOL anyway. lol, nice.

FWIW, you ever t that loan from the guy here in the thread that offered so you can get an S3 ?

Edit: If you check the S3 thread you should find a screen image from someone.

It's more than just a screen image. I need the underlying HTML. I really can't do it w/o an S3 on hand.

I got the loan ... working on getting an S3. Bitmain has done a good job making their Ants scarce. Reminds me of the diamond industry. Keep the supply limited.

M

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

Quote from: mdude77 on August 19, 2014, 07:04:16 PM

Quote from: MoreBloodWine on August 19, 2014, 07:03:04 PM

Hey M, I've been thinking about this.

Even with me using the latest FW, I should still be able to web scrape right ? I mean, AFAIK it's just the SSH API the new FW messes up. That said, just how do I enter my IP ? I saw presets like 1.2.3.4:5678 & 1.2.3.4:5678:80, hell, even 1.2.3.4:5678:80:80

I tried both 1.2.3.4:5678 & 1.2.3.4:5678:80 and don't seem to be getting any info with S1 or S2.

All my IP's are like this as I previously stated.

1.2.3.4:2013
1.2.3.4:2014
1.2.3.4:2015
1.2.3.4:2016

Screenscrapes won't work if the screen isn't like an S1 or S2. And I don't think it is.

Sad

M

So even if I had the old FW still, I'd be SOL anyway. lol, nice.

FWIW, you ever t that loan from the guy here in the thread that offered so you can get an S3 ?

Edit: If you check the S3 thread you should find a screen image from someone.

Topic: M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner - page 35. (Read 209500 times)