M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner - page 50.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: allcoinminer on June 22, 2014, 08:38:15 AM

Quote from: mdude77 on June 22, 2014, 08:20:57 AM

Quote from: allcoinminer on June 22, 2014, 08:16:47 AM

Excellent. Can you add a feature to see all the three pools?

In which regard? What exactly are you looking for? That's a lot of data to try to show on the grid.

M

The list of 3 pools we can now see in the Ant Status page need to be bring somewhere in MAntMonitor. May be as a popup on mouse over to the row or like that.

Just the pool names? What stats exactly are you looking for?

M

allcoinminer

hero member

Activity: 784

Merit: 504

Quote from: mdude77 on June 22, 2014, 08:20:57 AM

Quote from: allcoinminer on June 22, 2014, 08:16:47 AM

Excellent. Can you add a feature to see all the three pools?

In which regard? What exactly are you looking for? That's a lot of data to try to show on the grid.

M

The list of 3 pools we can now see in the Ant Status page need to be bring somewhere in MAntMonitor. May be as a popup on mouse over to the row or like that.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: allcoinminer on June 22, 2014, 08:16:47 AM

Excellent. Can you add a feature to see all the three pools?

In which regard? What exactly are you looking for? That's a lot of data to try to show on the grid.

M

allcoinminer

hero member

Activity: 784

Merit: 504

Excellent. Can you add a feature to see all the three pools?

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: leptar on June 22, 2014, 04:22:57 AM

It just gets better and better...

thanks...

sent another token of appreciation...

Thank you!

M

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: sepehr on June 22, 2014, 03:58:29 AM

Solved!
The two S1 devices and one S2 device had old firmwares!
Updated the firmware and the problem solved now!
Thank you!

Excellent!

M

leptar

member

Activity: 91

Merit: 10

It just gets better and better...

thanks...

sent another token of appreciation...

sepehr

sr. member

Activity: 399

Merit: 250

Cryptocurrency Evangelist

Quote from: sepehr on June 21, 2014, 11:43:17 PM

Quote from: mdude77 on June 21, 2014, 06:20:40 PM

Quote from: sepehr on June 21, 2014, 12:34:27 PM

Can you post a pic of the M's Ant Miner Ant tab? Are the rows for those Ants in question blank or have an error?

Thanks. The Alert routine wasn't properly checking to make sure that Ant row didn't have an error. But that doesn't help me determine why there's an error just yet. Is there nothing else in your log about those 4?

M

This is my complete one turn logs with your last update:

Code:

6/22/2014 9:02:29 AM: M's Ant Monitor v2.1 starting
6/22/2014 9:03:31 AM: ERROR when querying S1:14 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.
6/22/2014 9:05:03 AM: ERROR when querying S1:51 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.
6/22/2014 9:05:36 AM: ERROR when accessing API on 19.168.1.99: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 19.168.1.99:4028
6/22/2014 9:05:36 AM: ERROR when querying S2:99 (step 1): Value cannot be null.
Parameter name: s
6/22/2014 9:05:36 AM: ALERT: S1:39 exceeded 1 X count
6/22/2014 9:05:36 AM: ALERT: S1:49 exceeded 1 X count
6/22/2014 9:05:36 AM: ALERT: S1:64 exceeded 1 X count
6/22/2014 9:05:39 AM: Alert email sent.
6/22/2014 9:05:39 AM: Alert email sent.
6/22/2014 9:05:42 AM: Alert email sent.

Solved!
The two S1 devices and one S2 device had old firmwares!
Updated the firmware and the problem solved now!
Thank you!

sepehr

sr. member

Activity: 399

Merit: 250

Cryptocurrency Evangelist

Quote from: mdude77 on June 21, 2014, 06:20:40 PM

Quote from: sepehr on June 21, 2014, 12:34:27 PM

Can you post a pic of the M's Ant Miner Ant tab? Are the rows for those Ants in question blank or have an error?

Thanks. The Alert routine wasn't properly checking to make sure that Ant row didn't have an error. But that doesn't help me determine why there's an error just yet. Is there nothing else in your log about those 4?

M

This is my complete one turn logs with your last update:

Code:

6/22/2014 9:02:29 AM: M's Ant Monitor v2.1 starting
6/22/2014 9:03:31 AM: ERROR when querying S1:14 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.
6/22/2014 9:05:03 AM: ERROR when querying S1:51 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.
6/22/2014 9:05:36 AM: ERROR when accessing API on 19.168.1.99: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 19.168.1.99:4028
6/22/2014 9:05:36 AM: ERROR when querying S2:99 (step 1): Value cannot be null.
Parameter name: s
6/22/2014 9:05:36 AM: ALERT: S1:39 exceeded 1 X count
6/22/2014 9:05:36 AM: ALERT: S1:49 exceeded 1 X count
6/22/2014 9:05:36 AM: ALERT: S1:64 exceeded 1 X count
6/22/2014 9:05:39 AM: Alert email sent.
6/22/2014 9:05:39 AM: Alert email sent.
6/22/2014 9:05:42 AM: Alert email sent.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: norgan on June 21, 2014, 09:20:08 PM

Quote from: mdude77 on June 21, 2014, 09:16:24 PM

Since I had a little bit of time... here's v2.1. Lots of little things.

v2.1
- Added some more error handling and debug code around the API logic.
- Enabled alerts for the web screenscraping logic (non API).
- Fixed a typo that would complain about an S2 temp alert not being set when it was S1 turned on not S2.
- Visual change to make it clear how to add Ant addresses, and the local IP address is for scanning, nothing else.
- Added an email governor to prevent email alert spam. Set to this minimum time between EMail alerts. Note this runs by Ant, and defaults to 10 minutes.
- Added a difficulty column to the Ant output grid. It assumes the last difficulty for the first "Alive" pool is the right one.
- Added the ability for it to remember column positions.
- Added single instance logic, to prevent you from accidentally running more than one at a time.

Download link: MAntMonitor21.zip

M

Thanks for the update!

Likewise! Looks great. Not sure what I should use in the Parms: box under alert settings but it did alert me using a .wav, so cool!

norgan

sr. member

Activity: 308

Merit: 250

Decentralize your hashing - p2pool - Norgz Pool

Quote from: mdude77 on June 21, 2014, 09:16:24 PM

Since I had a little bit of time... here's v2.1. Lots of little things.

v2.1
- Added some more error handling and debug code around the API logic.
- Enabled alerts for the web screenscraping logic (non API).
- Fixed a typo that would complain about an S2 temp alert not being set when it was S1 turned on not S2.
- Visual change to make it clear how to add Ant addresses, and the local IP address is for scanning, nothing else.
- Added an email governor to prevent email alert spam. Set to this minimum time between EMail alerts. Note this runs by Ant, and defaults to 10 minutes.
- Added a difficulty column to the Ant output grid. It assumes the last difficulty for the first "Alive" pool is the right one.
- Added the ability for it to remember column positions.
- Added single instance logic, to prevent you from accidentally running more than one at a time.

Download link: MAntMonitor21.zip

M

Thanks for the update!

mdude77

legendary

Activity: 1540

Merit: 1001

Since I had a little bit of time... here's v2.1. Lots of little things.

v2.1
- Added some more error handling and debug code around the API logic.
- Enabled alerts for the web screenscraping logic (non API).
- Fixed a typo that would complain about an S2 temp alert not being set when it was S1 turned on not S2.
- Visual change to make it clear how to add Ant addresses, and the local IP address is for scanning, nothing else.
- Added an email governor to prevent email alert spam. Set to this minimum time between EMail alerts. Note this runs by Ant, and defaults to 10 minutes.
- Added a difficulty column to the Ant output grid. It assumes the last difficulty for the first "Alive" pool is the right one.
- Added the ability for it to remember column positions.
- Added single instance logic, to prevent you from accidentally running more than one at a time.

Download link: MAntMonitor21.zip

M

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: GuyllFyre on June 21, 2014, 03:51:20 PM

Quote from: mstrongbow on June 21, 2014, 01:44:03 PM

Quote from: GuyllFyre on June 21, 2014, 01:36:10 PM

*snipped
Local IP address
*snipped

It's IT jargon Cool

Most won't have issues with this but there will be a few.

LOL!
I've been doing IT work for 26 years.
When I realized what I did wrong, I felt like an idiot.

I figured that just a small change in description and adding one to the second field, would be enough to help everyone out.
You know, jog our memory as we're trying to not think any more after a day of learning scripting, command line options for various utilities, writing scripts to scan for certain issues, update certain things, automate cleanups and maintenance for others, and deploying customized power options to a series of computers that are being stupid due to default settings that cause problems...

leptar

member

Activity: 91

Merit: 10

working well here..

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: sepehr on June 21, 2014, 12:34:27 PM

Can you post a pic of the M's Ant Miner Ant tab? Are the rows for those Ants in question blank or have an error?

Thanks. The Alert routine wasn't properly checking to make sure that Ant row didn't have an error. But that doesn't help me determine why there's an error just yet. Is there nothing else in your log about those 4?

M

allcoinminer

hero member

Activity: 784

Merit: 504

Soon this thread will be
M's Ant (S1/S2/S3) Monitor v2.0 - now with alerts!

Feature Request:
Show the pools entered in ant S1 & S2. If the can be editable more good.

GuyllFyre

newbie

Activity: 50

Merit: 0

Quote from: mstrongbow on June 21, 2014, 01:44:03 PM

Quote from: GuyllFyre on June 21, 2014, 01:36:10 PM

*snipped
Local IP address
*snipped

It's IT jargon Cool

Most won't have issues with this but there will be a few.

LOL!
I've been doing IT work for 26 years.
When I realized what I did wrong, I felt like an idiot.

I figured that just a small change in description and adding one to the second field, would be enough to help everyone out.
You know, jog our memory as we're trying to not think any more after a day of learning scripting, command line options for various utilities, writing scripts to scan for certain issues, update certain things, automate cleanups and maintenance for others, and deploying customized power options to a series of computers that are being stupid due to default settings that cause problems...

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: GuyllFyre on June 21, 2014, 01:36:10 PM

*snipped
Local IP address
*snipped

It's IT jargon Cool

Most won't have issues with this but there will be a few.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: GuyllFyre on June 21, 2014, 01:36:10 PM

Quote from: mdude77 on June 21, 2014, 09:58:29 AM

Quote from: GuyllFyre on June 21, 2014, 09:18:21 AM

Another couple of updates on my progress.
I'm running Vista 32 Bit under VirtualBox in Linux Mint.
The adapter had put itself on a 10.x.x.x range. I switched that to bridge to my local adapter to get the local network IP on it.
API mode still does not work, same error.
Leaving API unchecked now puts the proper name in but it's not actually displaying anything else for status.

What addresses are you entering for your ants? Can you give a screenshot of your config tab?
M

I figured it out. Might help to have a bit more info here.
Local IP address makes me think that it's the IP of the Ant and the field below is for description.
When I realized that the local IP is that of the computer on which Ant Monitor is running, and then put the IP of the Ant in the next field down.
You might want to change "Local IP Address" or "Local PC IP" to something like "IP of your PC" or "IP of PC Running Monitor".
Then add a description for the next field like "Antminer IP".

ahh! good point.

thanks.

M

GuyllFyre

newbie

Activity: 50

Merit: 0

Quote from: mdude77 on June 21, 2014, 09:58:29 AM

Quote from: GuyllFyre on June 21, 2014, 09:18:21 AM

Another couple of updates on my progress.
I'm running Vista 32 Bit under VirtualBox in Linux Mint.
The adapter had put itself on a 10.x.x.x range. I switched that to bridge to my local adapter to get the local network IP on it.
API mode still does not work, same error.
Leaving API unchecked now puts the proper name in but it's not actually displaying anything else for status.

What addresses are you entering for your ants? Can you give a screenshot of your config tab?
M

I figured it out. Might help to have a bit more info here.
Local IP address makes me think that it's the IP of the Ant and the field below is for description.
When I realized that the local IP is that of the computer on which Ant Monitor is running, and then put the IP of the Ant in the next field down.
You might want to change "Local IP Address" or "Local PC IP" to something like "IP of your PC" or "IP of PC Running Monitor".
Then add a description for the next field like "Antminer IP".

Topic: M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner - page 50. (Read 209500 times)